Sunnydaze Decor DTA-294 User manual

DM-119
BEADBOARD SIDE TABLE
WITH DRAWER
DTA-294
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
09/2022
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

Page 1 / 7

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
    
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture;
only use a slightly moistened cloth.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.

dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
DM-119 09/2022 Page 2 / 7
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or
strip the screw hole, causing a weak connection and reduced stability.

  
AWood Dowel 8
BPlastic Foot 4
CM3.5x14mm Flat Screw 16
DM6x10mm Set Screw 4
EM4x10mm Screw 1
FCam Screw 16
GCam Lock 16
HM1.5X22mm Nail 25
IKnob 2
JMending Wedge 4
KHinge Set 2
L1 Left Drawer Slide Track 1
L2 Left Drawer Slide 1
MSilicone Backstop 1
NGuide Pin 1
OM4x20mm Screw 1
R1 Right Drawer Slide Track 1
R2 Right Drawer Slide 1
COMPONENTS
DM-119 09/2022
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and
pets away during assembly.
WARNING
Page 3 / 7
 (not included)
Phillips Screwdriver Rubber Mallet Hammer
  
1Right Side Panel 1
2Left Side Panel 1
3Tabletop 1
4Bottom Shelf 1
5Crossbeam 2
6Drawer Back 1
7Drawer Side Panel (L/R) 2
8Drawer Bottom 1
9Back Panel 1
10 Door 1
11 Drawer Front 1
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


Install wood dowels by gently tapping
them into the designated hole using a
rubber mallet.
Use a screwdriver to tighten the cam

the panel. Do not over-tighten or
under-tighten.
Align the cam lock opening (arrow)
with the pre-drilled hole on the side
of the panel. Use a screwdriver to
adjust alignment as needed.
DM-119 09/2022 Page 4 / 7
ASSEMBLY
Wood Dowel Cam Screw Cam Lock
IMPORTANT INSTALLATION INFORMATION
For the stability of the unit, it is important that furniture connectors are installed correctly.
See drawings and tips below for proper installation.
STEP 1
01: 1
02: 1
03: 1
05: 2
A: 4
F: 12
N: 1
STEP 2
B: 4
D: 4
H: 4
L1: 1
R1: 1

TIP: Install wood dowels
by gently tapping them into
the designated hole using
a rubber mallet.

DM-119 09/2022 Page 5 / 7
STEP 3
06: 1
07: 2
08: 1
11: 1
A: 4
F: 4
G: 4
STEP 4
C: 8
E: 1
I: 1
J: 4
L2: 1
R2: 1
STEP 5
10: 1
C: 4
I: 1
K: 2
O: 1
STEP 6
04: 1
G: 8
 

IMPORTANT:
Ensure Part 5 with the guide
pin (N) is installed horizontally,
as indicated in the drawing.

DM-119 09/2022 Page 6 / 7
STEP 7
G: 4
STEP 8
09: 1
H: 21
STEP 9
C: 4
M: 1



INSTALLATION/ ADJUSTMENT
INSTRUCTIONS
Door Installation:
Please note, the cabinet box must be level and plumb for the door to work
properly. Under certain conditions, wall surfaces may not be plumb, which
results in a slight gap one or more sides of the door.
Carefully hold the door in place and secure the hinge. Please note, the
hinge may need to be adjusted, use the adjustment screw to properly align
the door.
Door Adjustment:
Please note, care must be taken during hinge adjustment to avoid damage.
Only a slight adjustment is required. Rotate the Door Adjustment screws
1/8 to 1/4 turns at a time, then check the door position. Rotate adjustment
screws as necessary until doors are properly aligned.
Assistance is recommended for this step.

DM-119 09/2022 Page 7 / 7
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


SAFETY STATEMENTS & WARNINGS
• For residential use only. Not for commercial or industrial use.
• For indoor use only.
• Ensure all fittings are tight before use. Periodically check fittings to ensure they are tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Never allow children to stand, climb, or hang on drawers, doors, or shelves.
• Do not place liquids or hot items directly on the furniture.
• Never use chemical cleaning products or polishes as doing so may damage the finish.
• Do not exceed the weight capacity of the furniture.
• Do not overload the shelf as doing so may cause it to sag.
• Do not overload the drawer as doing so may cause permanent damage.
• Do not place the unit in direct sunlight.
• Avoid placing the unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Do not write on furniture without a padded barrier to protect the surface.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
STEP 10