Sunnydaze Decor SQUARE TABLE TLA-924 User manual

Page 1 / 3
SQUARE TABLE
Read this manual carefully before using this product.

 
Tabletop 1
Leg 4
M5x40 Screw 48
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/202010104015
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINTS
Sunnydaze Decor advises reading this manual fully, and assembling the item soon after purchase. Check that
all parts are accounted for and familiarize yourself with the assembly before beginning.
Fasten all screws equally and tightly, failure to do so may result in cracking during assembly and/or breakage
during use.

Phillips Screwdriver

Page 2 / 3

ASSEMBLY
08/2020
STEP 1
Lay the tabletop face down on a soft, clean surface.
Firmly insert the leg into the corner of tabletop, ensuring the
leg is fully inserted into the corner of the tabletop.
Check to make sure all holes on the leg align with the holes
on the underside of the tabletop.
2
4
3
1
STEP 2
Do not fully tighten any screw until all screws have been partially afxed.
Starting at the outermost edges and working towards the center, a󰀩x the screws halfway through the leg into
the tabletop.
Following the diagrams below is highly recommended to prevent the plastic from cracking during assembly or
breaking while the table is in use.
5
7
6
8
9
10
12
11
10104015

Page 3 / 3
Care & Maintenance
Cleaning
Do not use harsh chemicals or abrasive materials to clean the table.
Mix mild soap with warm water and wash the table using a soft cloth. Thoroughly rinse soap
residue off the table. Dry with a soft, lint-free cloth.
D D
Never sit or stand on the table.
Periodically check assembly points and tighten hardware as necessary.
When not in use, covering the table with a breathable cover will help protect it from
the harmful e󰀨ects of sunlight, dust build-up, and collecting debris.
Protect this item from inclement weather, especially ice and
snow. Move the table to a cool, dry indoor location. Cover the table while in storage to help
prevent dust build-up.

08/2020
1 3 9
7
5
11
6
12
10
2
4
8
STEP 3
Fasten all screws equally.
Do not over-tighten screws as doing so may
cause cracking and breakage.
Starting at the outermost edges and working towards the
center, tighten all screws. Ensure the screws are secure
but do not over-tighten as doing so may cause the plastic to
crack and break.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


10104015