Sunnydaze Decor SIGONELLA CAST ALUMINUM TABLE YUK-267 User manual

Page 1 / 4XG407
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully,
and assembling the item soon after purchase. Check
that all parts are accounted for and familiarize yourself
with the assembly before beginning.
SIGONELLA CAST ALUMINUM TABLE
YUK-267
Read the assembly instructions carefully and follow the care instructions. Save this document for future reference.

  
ALeg 4
BPanel 4
CTabletop 1
DSpanner 1
EM8x35mm Grub Screw 12
FFlat Washer 12
GSplit Washer 12
HNut 12
IHex Key 1
1/2021
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
CHOKING HAZARD — This item contains small parts
that can be swallowed by children. Keep children away
during assembly.
WARNING
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.

Page 2 / 41/2021XG407
ASSEMBLY
STEP 1
A: 4
E: 8
STEP 2
B: 2
F: 4
G: 4
H: 4
IMPORTANT
Each side of Panel (B) is different.
Pay attention to installation direction to ensure panels align correctly.
• Firmly secure 2x Grub
Screws (E) into Leg (A)
using Hex Key (I).
• Repeat this step for
remaining three legs.
• Align 2x Side Panels (B) as
shown in the diagram at the top
of this page.
• Secure the overlapping side
panels to the grub screws
on one of the legs using two
sets of Flat Washer (F), Split
Washer (G) and Nut (H).
• Ensure the third Side Panel (B) is
correctly aligned with a side panel
from Step 1.
• Before securing the second leg,
check that the top and bottom are
installed in the same direction as
the first leg.
• Secure the overlapping side panels
to the grub screws on Leg (A) using
two sets of Flat Washer (F), Split
Washer (G) and Nut (H).
STEP 3
A: 1
B: 1
F: 2
G: 2
H: 2
Do not tighten hardware until Step 6 is complete. Do not tighten hardware until Step 6 is complete.

Page 3 / 41/2021XG407
STEP 4
A: 1
B: 1
F: 4
G: 4
H: 4
STEP 5
C: 1
E: 4
• Ensure the last Side Panel (B)
is correctly aligned, and Legs
(A) are in the right direction.
• Secure the legs to the side
panels using four sets of Flat
Washer (F), Split Washer (G)
and Nut (H).
• Place Tabletop (C) face-down
on a clean, soft surface.
• Firmly secure 4x Grub Screws
(E) into Leg (A) using Hex Key
(I).
• Place the assembled base
over the grub screws on the
tabletop.
• Secure each leg using one Flat
Washer (F), Split Washer (G)
and Nut (H).
• Fully tighten all nuts, from all
steps, using Spanner (D).
STEP 6
F: 4
G: 4
H: 4
STEP 7
Do not tighten hardware until Step 6 is complete.
• If the table sits unevenly,
simply turn the threaded
feet slightly until balance is
achieved.
• Please note, the adjustable
leg-leveling feet are only
effective on slightly uneven
surfaces.
Adjustable
Leg-Leveling Feet

Page 4 / 41/2021XG407
Care & Maintenance
SAFE USE: For residential use only. Only use on a at, level surface.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the harmful e󰀨ects
of sunlight, inclement weather, as well as dust build-up, and collecting debris.
WINTER CARE & STORAGE: During winter and freezing temperatures, move the furniture to a cool, dry
indoor location. Covering while in storage will help prevent dust build-up.
SCRATCHES: The powder-coating on this product is tough & durable but, even under normal use, some
scratching is inevitable. Scratches can be repaired with a rust-resistant paint.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
Cleaning
DO NOT USE BLEACH DO NOT USE A PRESSURE WASHERHAND-WASH ONLY

SAFETY STATEMENTS & WARNINGS
• Do not exceed the weight capacity of the furniture.
• Do not sit, stand, or climb on the table.
• Inspect hardware often and tighten loose hardware before use.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
Mix warm water with mild detergent. Use a soft cloth to hand-wash the furniture. Use a garden hose to
thoroughly rinse away all soap residue. To prevent water spotting, dry with a soft, lint-free cloth.
WARNING!
             

