Sunnydaze Decor BEADBOARD DTA-317 User manual

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Page 1 / 10DM-234
BEADBOARD 6-DRAWER DRESSER
DTA-317
Carefully review assembly and care instructions before using this product. Save this document for future reference.

2-PERSON
ASSEMBLY
RECOMMENDED
11/2022

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
    
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture;
only use a slightly moistened cloth.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.

dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Never open more than one
drawer at a time.
Place heaviest items in the lowest
drawers.
Never put a TV on this product.
Page 2 / 10DM-234 11/2022

COMPONENTS
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
WARNING
 (not included)
Phillips Screwdriver Rubber Mallet Hammer Power Drill with Bit
  
A30mm Wood Dowel 34
BPlastic Foot 6
CM3.5x14mm Flat Screw 70
DM6x8mm Set Screw 24
DE M5x50mm Screw 1
EM4x10mm Screw 12
FCam Screw 40
GCam Lock 50
HM1.5X22mm Nail 46
HE Angle Bracket 1
IKnob 12
JMending Wedge 24
LWall Anchor 1
L1 Left Drawer Slide Track 6
L2 Left Drawer Slide 6
MH-Channel 2
O50mm Wood Dowel 5
PDouble-End Cam Bolt 5
QMending Plate 8
R1 Right Drawer Slide Track 6
R2 Right Drawer Slide 6
  
1Right Side Panel 1
2Left Side Panel 1
3Top Panel 1
4Center Panel 1
5Crossbeam 10
6Back Panel 4
7Drawer Back 6
8Drawer Bottom 6
9Beadboard Drawer Front 2
10 Drawer Side Panel (L/R) 12
11 Drawer Front 4
Page 3 / 10DM-234
2-PERSON
ASSEMBLY
RECOMMENDED
11/2022

Install wood dowels by gently tapping
them into the designated hole using a
rubber mallet.
Use a screwdriver to tighten the cam

the panel. Do not over-tighten or
under-tighten.
Align the cam lock opening (arrow)
with the pre-drilled hole on the side
of the panel. Use a screwdriver to
adjust alignment as needed.
ASSEMBLY
Wood Dowel Cam Screw Cam Lock
IMPORTANT INSTALLATION INFORMATION
For the stability of the unit, it is important that furniture connectors are installed correctly.
See drawings and tips below for proper installation.
STEP 1
01: 1
02: 1
03: 1
05: 10
A: 10
F: 16
O: 5

Page 4 / 10DM-234
IMPORTANT:
Take note of Part A and Part O installation
as indicated in the drawings to the left.
11/2022

STEP 2
04: 1
B: 6
C: 12
D: 24
H: 6
L1: 6
R1: 6

IMPORTANT:
Install Flat Screw (C)
after
Set Screws (D).
Page 5 / 10DM-234
STEP 3
G: 5

IMPORTANT:
Ensure the slide tracks are installed in the correct direction, as indicated in the drawings.
11/2022
IMPORTANT:

have Long Dowel (O) installed into one end.
Ensure the crossbeams are installed in the
correct direction, as indicated in the drawing.

STEP 4
G: 5
P: 5
STEP 5
G: 10


Page 6 / 10DM-234
IMPORTANT:
Ensure the short end
of Double Cam Bolt
(P) is installed into the
crossbeam, and the
long end installs through
Center Panel (4), as
indicated in the diagram.
11/2022

STEP 6
G: 6
STEP 7
06: 4
C: 8
H: 40
M: 2
Q: 8


Page 7 / 10DM-234 11/2022

STEP 8
07: 6
09: 2
10: 12
11: 4
A: 24
F: 24
STEP 9
08: 6
C: 24
G: 24
J: 24
Page 8 / 10DM-234


STEP 10
C: 24
E: 12
I: 12
L2: 6
R2: 6

IMPORTANT:
Ensure the slide tracks are 
drawer front, and installed in the correct
direction, as indicated in the left drawing.
11/2022

STEP 11
C: 2
DE: 1
HE: 1
L: 1

Page 9 / 10DM-234
IMPORTANT:
Carefully measure the location of pilot hole before drilling and installing the wall anchor.
WARNING:
 
Tipover Restraint Installation
• Ensuring it is at least 20mm from the top of the unit and flush with the back panel, fasten Angle Bracket
(HE) to the divider panel using two M3.5x14mm Flat Screws (C).
• Place the unit against the wall and slowly drill a pilot hole through the hole in the angle bracket and
into the wall. IMPORTANT: Ensure the pilot hole depth does not exceed the length of the wall anchor.
• Move the unit away from the wall. Insert the wall anchor into the pilot hole until the opening of the
anchor is flush with the wall. The wall anchor must be well fitted and tight in the pilot hole.
• With assistance, realign the unit with the wall, ensuring the angle bracket aligns with the wall anchor.
Use M5x50mm Screw (DE) to secure the bracket to the wall anchor.
Assistance required for moving the furniture.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether
direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect
of this product.
11/2022

Add clothing storage info
or move 13 here so 12 can
be bigger
STEP 12
Page 10 / 10DM-234

SAFETY STATEMENTS & WARNINGS
• For residential use only. Not for commercial or industrial use.
• For indoor use only.
• Ensure all fittings are tight before use. Periodically check fittings to ensure they remain tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Never allow children to stand, climb, or hang on drawers, doors, or shelves.
• Never put a television on this product.
• Do not place liquids or hot items directly on the furniture.
• Never use chemical cleaning products or polishes as doing so may damage the finish.
• Do not exceed the weight capacity of the furniture.
• Do not overload the drawers as doing so may cause permanent damage.
• To prevent tipping, place heaviest items in the lowest drawers and never open more than one drawer at a time.
• Do not place the unit in direct sunlight.
• Avoid placing the unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Do not write on furniture without a padded barrier to protect the surface.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or
indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
11/2022