Sunnydaze Decor RAISED ADIRONDACK CHAIR User manual

Page 1 / 2ATL012
RAISED ADIRONDACK CHAIR
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINT
Do not fully tighten hardware until all components are assembled.
If hardware is tightened too soon, mounting holes may not align,
and parts may not easily t together.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
CHOKING HAZARD — This item contains
small parts that can be swallowed. Keep
children and pets away during assembly.
WARNING

Hex Key
Spanner
2-PERSON
ASSEMBLY
RECOMMENDED
12/2021
  
ASeat 1
BBackrest 1
CLeft Leg 1
DRight Leg 1
ERight Armrest 1
FLeft Armrest 1
GFront Rail 1
HBack Rail 1
IBack Support 2
  
1M6x60mm Bolt Set 12
2M6x50mm Screw 10
3M6x80mm Screw 2

Page 2 / 3
ASSEMBLY
STEP 1
C: 1
D: 1
G: 1
2: 2
STEP 2
A: 1
H: 1
2: 2
STEP 3
1: 6
STEP 4
E: 1
F: 1
1: 2
 Do not fully tighten hardware until Step 6 is complete.

Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.
Do not fully tighten hardware until Step 6 is complete.
12/2021
TIP: Install bolt head on the inside

ATL012
Do not fully tighten hardware until Step 6 is complete.
Do not fully tighten hardware until Step 6 is complete.
Do not fully tighten hardware until Step 6 is complete.

Page 3 / 312/2021

• Do not exceed the weight capacity.
• Never stand on the chair.
• Inspect hardware often and tighten loose hardware before use.
• Do not put hot items on or near furniture.
• Keep furniture a safe distance from heat sources such as, but not limited to, fire pits, patio heaters, and grills.
• Do not allow children to use this product without adult supervision.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
SAFETY STATEMENTS & WARNINGS
SAFE USE: For residential use only. Only use on a at, level surface. Do not stand on the chair. Do not
exceed the weight capacity.
Periodically check hardware and tighten as necessary.
CLEAN: Mix a mild soap and water solution and wipe surfaces with a soft, non-abrasive cloth. Rinse with
clean water, ensuring all soap residue has been removed. Do not use harsh chemicals or abrasive materials
to clean.
: Protect from inclement weather by moving furniture to an indoor location.
Cover while in storage to help prevent dust build-up. When not in use, cover furniture with a breathable cover
to help protect it from the e󰀨ects of sunlight, inclement weather, dust build-up, and collecting debris.
Care & Maintenance
ATL012
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

STEP 5
B: 1
2: 2
3: 2
Fully tighten hardware from all steps after this step is complete.
STEP 6
I: 2
1: 4
2: 4
Do not fully tighten hardware until Step 6 is complete.