Sunnydaze Decor DMR-439 User manual

4496 Page 1 / 3
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
Save this manual for future reference.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
RECTANGULAR SIDE TABLE
DMR-439
Review assembly instructions carefully and follow the care instructions. Save this document for future reference.

01/2022
  
ATabletop 1
BLeg Panel (L,R) 2
CCrossbar 1
DM8x20mm Bolt 6
EHex Key 1
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
NOTE: Over time, and with use, the bolts may become loose.
Save the included tools for tightening loosened hardware.
Ensure all parts are
accounted for before
disposing of packaging.

Page 2 / 34496 01/2022
ASSEMBLY
STEP 1
B: 2
C: 1
TIP: Assemble components
on a clean, soft surface to avoid

Review all steps and understand
assembly before beginning.
Do not fully tighten hardware until all
components have been loosely assembled.
If bolts are tightened too soon, mounting holes may not
align, and parts may not easily t together.
STEP 2
A: 1
STEP 3
TIP: Always fully insert the hex key inside the designated
notch of the bolt.
If the hex key is not fully inside the notch, the hex key
could slip out, causing damage to the bolt head. Repeated
hex key slipping will cause the notch to become rounded,
making it di󰀩cult or impossible to tighten the bolt with the
hex key.
• Lay Tabletop (A) upside down on a soft, clean surface.
• Firmly holding the legs and crossbar, place the legs
over the tabs on the bottom of the tabletop.
• Secure the crossbar to the legs using two M8x20mm
Bolts (D) and four bolts to secure the legs to the
tabletop.
• Align Crossbar (C) with the tabs on the bottom of Legs
(B). Ensure the mounting holes on the crossbar are
facing the bottom of the table, as shown.
TIP: To maximize evenness, do not
fully tighten a single bolt before moving
onto the next. Instead, gradually tighten
each bolt until all bolts are evenly
secured.
D: 6

SAFETY STATEMENTS & WARNINGS

Page 3 / 34496 01/2022
Care & Maintenance
SAFE USE: Do not sit or stand on this unit.
CLEAN: Wipe down surfaces with a damp cloth. Dry with a soft, lint-free cloth.
I N S P E C T: Periodically check hardware and tighten as necessary.
STORAGE: Store indoors during freezing conditions. Cover with a breathable cover to prevent dust and debris
build-up.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


• Do not sit or stand on any part of this unit.
• Do not exceed the weight capacity of the unit.
• Do not put hot items on or near furniture.
• Keep furniture a safe distance from heat sources such as fire pits, patio heaters, and grills.
• Do not use harsh chemicals or abrasive materials to clean this unit.
• This product is for residential use only; institutional or commercial use will void this warranty.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.