Sunnydaze Decor AGR-416 User manual

CR915
SIDEBOARD CABINET WITH DRAWERS
AGR-416
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2022
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

2-PERSON
ASSEMBLY
RECOMMENDED
Page 1 / 11

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
microber cloth to prevent dust
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.
Assemble on a soft, at, clean, and
dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
CR915 08/2022
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

Page 2 / 11

  
AWood Dowel 44
BM4.5x28mm Pan Screw 28
CM3.5x14mm Pan Screw 24
DM3.5x25mm Pan Screw 10
ETack 8
FM4.5x25mm Pan Screw 6
GHandle Set 4
HConnector 12
JCatch 2
KStrike 2
LM3.5x30mm Flat Screw 16
MHinge 4
NShelf Pin 4
OM3x16mm Flat Screw 8
PDrawer Slide 4
QM4x8mm Bolt 4
RM3x14mm Flat Screw 12
YWall Anchor Kit 1
Z8x8mm Nail 22
COMPONENTS
(not included)
Phillips Screwdriver
Rubber Mallet
Hammer
Power Drill,
6mm Drill Bit,
2mm Drill Bit
CR915 08/2022
  
01 Top 1
02 Left Side Panel 1
03 Right Side Panel 1
04 Bottom Panel 1
05 Shelf 1
06 Bottom Frame 1
07 Center Face Frame 1
08 Top Face Frame 1
09 Vertical Cabinet Face Frame 1
10 Drawer Side (L/R) 4
11 Outside Drawer Rail (L/R) 2
12 Center Drawer Rail 1
13 Center Drawer Rail Support 1
14 Side Trim Board (L/R) 2
15 Front Trim Board 1
16 Backing Board 2
17 Divider 1
18 Left Door 1
19 Right Door 1
20 Drawer Face 2
21 Drawer Bottom 2
22 Drawer Back 2
23 Right Stile 1
24 Left Stile 1
25 Vertical Drawer Face Frame 1
CHOKING HAZARD —
This item contains small
parts that can be swallowed.
Keep children and pets away
during assembly.
WARNING
Ensure all parts are
accounted for before
disposing of packaging.
Page 3 / 11

IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability.
CR915 08/2022
ASSEMBLY
Carefully review all steps and fully understand assembly before beginning.
STEP 1
02: 1
03: 1
04: 1
A: 14
H: 12
J: 2
N: 4
O: 4
STEP 2
06: 1
07: 1
08: 1
09: 1
11: 2
12: 1
13: 1
25: 1
A: 30
TIP: Install wood dowels and connectors by gently tapping
them into the designated holes using a rubber mallet.
Page 4 / 11

CR915 08/2022
STEP 3
23: 1
24: 1
B: 6
STEP 5
B: 1
STEP 4
D: 4
IMPORTANT:
Ensure the stiles are installed in the correct
direction, as indicated in the diagrams.
IMPORTANT: Ensure the rail support is installed in the correct direction,
as indicated by the diagram.
Page 5 / 11
IMPORTANT:
Ensure the mounting holes
of all components are as
indicated by the diagram.

CR915 08/2022
STEP 6
B: 6
D: 6
STEP 8
15: 1
B: 3
STEP 7
01: 1
14: 2
B: 4
F: 6
Page 6 / 11

CR915 08/2022
STEP 9
B: 8
STEP 11
18: 1
C: 6
G: 1
K: 1
M: 2
O: 2
STEP 10
05: 1
IMPORTANT: Ensure the drawer rails are
installed in the correct direction, as indicated
in the diagram.
Page 7 / 11
IMPORTANT:
Note the direction of the hinge mounting holes
and install as shown in the diagram.
Do not fully secure Screws (C) until after
the door is 

CR915 08/2022
Front
Back
ADJUSTING HINGE
STEP 12
19: 1
C: 6
G: 1
K: 1
M: 2
O: 2
STEP 13
C: 12
E: 8 IMPORTANT: Ensure the door is properly aligned before fully securing any screws.
Before installing the tacks, carefully measure to ensure spacing is even.
Assistance is recommended for this step.
Page 8 / 11
IMPORTANT:
Note the direction of the hinge mounting holes
and install as shown in the diagram.
Do not fully secure Screws (C) until after the
door is 

CR915 08/2022
STEP 14
10: 4
20: 2
21: 2
22: 2
G: 2
L: 16
STEP 16
Q: 4
STEP 15
P: 4
R: 12
Page 9 / 11

CR915 08/2022
M3.5x14mm
M3.5x25mm
Wall
Top
STEP 17
16: 2
17: 1
Z: 22
STEP 18
Y: 1
IMPORTANT: If walls are not solid like brick, stone or concrete, you will require special ttings (not included). When
in doubt, consult a professional.
Carefully measure the location of pilot hole before drilling and installing the unit.
WARNING: Check for pipes and electrical wiring before drilling.
• Place wall mounting strap against the wall and mark the position for drilling the hole.
• Using a power drill with a 6mm bit, drill a hole to 30mm depth. If the wall is softer, using a 5mm bit is recommended.
• Insert the wall anchor into the hole until the opening is flush with the wall.
• Secure the strap to the wall using the 25mm screw and washer.
• Use a 2mm drill bit to pre-drill a small pilot hole on the back of the furniture top. Secure the other end of the strap to
the furniture using the 14mm screw and washer.
Page 10 / 11