Sunnydaze Decor JULIAN GF-284 User manual

Page 1 / 3
JULIAN ARMCHAIR
GF-284
Read this manual carefully before using this product. Save this manual for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
GF-WKD 33 3/2021
  
ABack Panel 2
BSeat 2
CRight Chair Leg 2
DLeft Chair Leg 2
ELeft Armrest 2
FRight Armrest 2
Ensure all parts are
accounted for before
disposing of packaging.
  
1M6x20mm Bolt 20
2M6x15mm Screw 4
3M6 Washer 20
4M4 Hex Key 1
WARNING
CHOKING HAZARD — This item contains small parts that can be
swallowed by children. Keep children away during assembly.

Page 2 / 33/2021
STEP 1 STEP 2
STEP 3
A:1
B:1
1: 4
3: 4
C:1
D:1
1: 4
3: 4
E: 1
F: 1
1: 2
2: 2
3: 2
ASSEMBLY
GF-WKD 33
Tip: Always fully insert the hex key inside designated
notch of the bolt.
If the hex key is not fully inside the notch, the hex
key could slip out, causing damage to the bolt head.
Repeated hex key slipping will cause the notch to
become rounded, making it di󰀩cult or impossible to
tighten the bolt with the hex key.
Do not use any electronic tools to assemble these
product. The high energy of electronic tools will
cause hardware to over-tighten, stripping the bolt,
bolt head, or bore holes.
Do not over-tighten screws or bolts.
Firmly secure each armrest
to the backrest using Bolt (1)
and Washer (3).
Ensure the front of each armrest is aligned with the
leg and secure using Screw (2).
Connect Seat (B) to Back Panel (A) using Bolts (1)
and Washers (3).
Connect Legs (C, D) to the seat using Bolts (1) and
Washers (3).

Page 3 / 3
Care & Maintenance
SAFE USE: For residential use only. Only use on a at, level surface. Do not stand on the chair.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the e󰀨ects of
sunlight, inclement weather, dust build-up, and collecting debris.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move to
a cool, dry indoor location. Covering while in storage is recommended to help prevent dust build-up.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

• Do not exceed the weight capacity of the furniture.
• Do not stand on the chair.
• Inspect hardware often and tighten loose hardware before use.
• Do not put hot items on or near furniture.
• Do not allow children to use this product without adult supervision.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
• Do not use a pressure washer to clean the furniture.
SAFETY STATEMENTS & WARNINGS

3/2021GF-WKD 33

Page 1 / 2
SQUARE TOP TABLE
GF-291
Read this manual carefully before using this product. Save this manual for future reference.

  
ATabletop 1
BLeg 4
Ensure all parts are
accounted for before
disposing of packaging.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
GF-WKD 32
  
1M6x20mm Bolt 8
2M6 Washer 8
3M4 Hex Key 2
WARNING
CHOKING HAZARD — This item contains
small parts that can be swallowed. Keep
children and pets away during assembly.
Tip: Always fully insert the hex key inside designated notch of the bolt.
If the hex key is not fully inside the notch, the hex key could slip out,
causing damage to the bolt head. Repeated hex key slipping will cause
the notch to become rounded, making it di󰀩cult or impossible to tighten
the bolt with the hex key.
10/2021

SAFETY STATEMENTS & WARNINGS
Page 2 / 2
STEP 1
A:1
B:4
1: 8
2: 8
ASSEMBLY
Lay Table Frame (A) face-down
on a soft, clean surface.
Secure Leg (B) to the frame using
two M6x20mm Bolts (1) and two
M6 Washers (2).
Repeat to a󰀩x remaining legs.
GF-WKD 32
Care & Maintenance
SAFE USE: For residential use only. Only use on a at, level surface. Do not sit or stand on the table.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the e󰀨ects of
sunlight, inclement weather, dust build-up, and collecting debris.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move to
a cool, dry indoor location. Covering while in storage is recommended to help prevent dust build-up.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
• Do not exceed the weight capacity of the furniture.
• Do not sit or stand on the table.
• Inspect hardware often, tighten loose hardware before use.
• Do not put hot items on or near furniture.
• Do not allow children to use this product without adult supervision.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
• Do not use a pressure washer to clean the furniture.
10/2021
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

