Sunricher SR-2830A-AC User manual

RF Wall Mounted Touch Panel
Parameter
Wiring diagram
2)Receiver Connection Diagram for Single Unit
3) Connection Diagram for Multiple UnitsReceiver
Product Size
1)Sender DiagramConnection
Power Supply
12-36VDC
LN
110V-230VAC
whi te
SR-1009FA
LED CONTROL LER
1234
Learning Key
Single ColorL ED S tr ip
Backlight
Glass interface(White & Black)
Touch sensitive
Adjust brightness
Feature
4x5A
Power Supply
12-36VDC
LN
110V-230VAC
whi te
SR-1009FA
LED CONTROLLER
1234
Learning Key
4x10A
SR-2830A(US)-AC/SR-2830A(US)-DC
Part No. Input Voltage Remarks
Output Current
SR-1009FA 12-36VDC Constant voltage
4x(60-180)W
4x5A
Output Power
SR-1009EA 12-36VDC Constant voltage
4x(96-288)W4x8A
Remote
Part No. Operation Voltage DIMENSIONS
ø/h (mm)
Operation
Frequency
SR-2830A(US)-AC 100-240VAC 120x75x29.1
916.57MHz
Receiver
SR-1009FA3 12-36VDC Constant current
4x(4.2-12.6)W
4x350mA
SR-1009FA7 12-36VDC Constant current
4x(8.4-25.2)W4x700mA
Remarks
Touch Sensor
SR-2830A(US)-DC 12-24VDC 120x75x29.1
916.57MHz Touch Sensor Single ColorLED Strip
Single ColorL ED S tr ip
Single ColorL ED S tr ip
Single ColorL ED S tr ip
120.0
75.0
29.1
Power Supply
12-36VDC
LN
110V-230VAC
whi te
SR-1009FA
LED CONTROLLER
1234
Lea rnin g Key
Sing le Co lor LED S trip
whi te
SR-1009FA
LED CONTROLLER
1234
Lea rnin g Key
whi te
SR-1009FA
LED CONTROLLER
1234
Lea rnin g Key
4x5A
4x5A
4x5A
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
Sing le Co lor LED S trip
110V-230VAC N
L
LN
110V-230VAC
Power Supply
12-24VDC
L N
SR-2830A-US(AC)
L NVin
SR-2830A-US(DC)
GND
5

Operation
Description of buttons
Installation
Turn ON/OFF
4 zones control seperately or
syhchronously, each zone could
control multiple receivers.
Save scene into S1/S2/S3.
1. Learning ID with SR-1009 series:
Click learning button on RF receiver →
Short Touch a zone button Z1,Z2,Z3 or Z4 →Touch dimming slider
The light flick means ID learnt successfully.
Touch zone button Z1/Z2/Z3/Z4 separately over 2 seconds, which will turn ON/OFF separately.
The backlight blue is ON for the zone, yellow is OFF for the zone.
2. Save and replay
Save: Touch dimming slider to get a color→
Note:
This controller is RF signal to receivers, no need cable.
AC version no need driver, working directly at electric supply 100-230VAC.
The DC version need a driver 12/24V.
Notice : Each sender can control 4 different zones separately, each zone can be learned endless receivers , so
one sender can cont rol as many receivers as you can.
Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Hold any button of S1,S2 or S3 over 2 seconds(4zones work together)
The light flick means successfully saved.
Replay: Short touch button S1,S2 or S3 →Replay the scene just saved.

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.