•
Before making any connections, make sure that the MSS is unplugged. Then connect
the speakers via the audio cable (see Fig. 2).
•Plug the RCA connectors of the 2RCA to 3.5 mm mini-jack stereo signal cable (included)
into the AUDIO INPUT L/R input, and the 3.5 mm mini-jack of the signal cable – into the output
of your PC sound card or an audio output of another sound source, as shown in Fig. 2.
Note:
• To connect the MSS to a CD/DVD/MP3 player or TV, use the 2RCA to 3.5 mm mini-jack
stereo signal cable (included) with a mini-jack to 2RCA adapter (not included) or a 2RCA to
2RCA stereo signal cable (not included), as shown in Fig. 2.
•Plug the power cord into a mains outlet. Set the master volume level to the minimum by turning
the VOLUME control knob bcounterclockwise until it stops.
•Switch on power supply by ON/OFF switch on the active speaker rear panel.
•Select a desired signal source AUX/BT by pressing short button fon the control panel.
“Line input” Mode (AUX)
•Press button fon the side panel to switch the AUX mode. Indicator aon the side panel
will change its light to green.
Bluetooth Mode (BT)
•In order to transmit signal in this mode it is necessary at first to connect the device with a signal
source (see Fig. 2). For this purpose select the Bluetooth mode using button fon the side panel.
Speaker system will enter the search mode, indicator awill blink blue color. .
•It is necessary to select the search mode of devices with Bluetooth on a signal source (tele-
phone, notebook, smartphone, etc.). “SVEN SPS-614/SPS-701/SPS-705” massage will be
displayed on the screen, which is to be connected to*.
•The indicator a lights continuously when connection is successful. If there is no connection,
indicator awill blink. In this case the system should be switched over to the search mode once
again (turn off and turn on Bluetooth mode)**.
•Adjust the volume level by turning the VOLUME control knob b. By turning the knob clockwise,
you increase volume level; by turning the knob counterclockwise, you reduce it.
•Adjust the treble and bass levels by turning the TREBLE control knob cand BASS control knob
d respectively. By turning the knobs clockwise, you increase the treble/bass level; by turning
the knobs counterclockwise, you reduce it.
•Connect your headphones to the headphone jack e(see Fig. 1).
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose only the item name and the “connect” command on the source.
Note:
• After using the MSS, mind to switch it off on the active speaker rear panel by ON/OFF switch,
and unplug the power cord.
17
ENG
Operation Manual sPS-701
sPS-705
sPS-614
