Sven SPS-615 User manual

www.sven.fi
OPERATION
MANUAL
2.0 Multimedia Speaker
System
with Bluetooth
SPS-615

ENG
1
Operation Manual
Technical support is on www.sven.fi.
Congratulations on your purchase of the Sven speaker system!
COPYRIGHT
© 2016. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The
information in this Manual is given on “as is” terms. The author and the publisher do not bear any
liability to a person or an organization for loss or damage which has arisen from the information
contained in this Manual.
CONTENTS
1. BUYER RECOMMENDATIONS ..................................................
..............
2. PACKAGE CONTENTS............................................................. .............
3. SAFETY PRECAUTIONS .................................................. ......................
4. TECHNICAL DESCRIPTION .................................................... .................
5. PREPARATION AND OPERATION .......................................... .......................
6. TROUBLESHOOTING.................................. ...............................................
7. TECHNICAL SPECIFICATIONS ..................................................... ...........
1
2
2
2
4
7
7
1. BUYER RECOMMENDATIONS
• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the
device for damage; if the product was damaged during transportation, address the firm which
carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Check up the package contents and availability of the warranty card. Make sure the warranty card
has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods
number corresponds to that in the warranty card. Remember: in case of warranty card loss or
discrepancy of numbers you forfeit the right for warranty repairs.
• Do not switch on the speaker system immediately after you bring it into a room from environment
with negative temperature! After unpacking, the speaker system should be kept in conditions of
room temperature for at least 4 hours.
• Before installing and using the speaker system, read this Manual carefully and keep it for future
reference.
SPS-615

ENG
2
2.0 Multimedia Speaker
System
with Bluetooth
2. PACKAGE CONTENTS
• Speakers – 2 pcs
• 2RCA to mini-jack signal cable – 1 pc
• Remote control – 1 pc
• Operation manual – 1 pc
• Warranty card – 1 pc
3. SAFETY PRECAUTIONS
• To avoid electric shock, do not open the MSS and do not perform repairs by yourself. Service and repairs
should be performed only by qualified specialists in an authorized service center. The list of authorized
service centers is available on www.sven.fi.
• Do not allow the circuit of wires (including the grounded ones) between the speakers, on the power
amplifier or the ground, for it causes damage to the power amplifier output stage.
• Do not touch the MSS power cord plug pins for 2 seconds after unplugging it from the mains.
• Do not put foreign objects inside the holes of the MSS.
• Protect the MSS from high humidity, water and dust.
• Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose it to
direct sunlight.
• Do not place any open flame sources on or close to MSS.
• Do not place the MSS in poorly ventilated areas. Leave an air gap of 10 cm or more. When operating the
MSS, do not put any devices on it, do not cover it with cloth or other objects preventing it from cooling.
• Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
4. TECHNICAL DESCRIPTION
SPS-615 Multimedia Speaker System with Bluetooth (MSS) are designed to play music and sound
games, movies, etc. The MSS has a built-in power amplifier allowing to connect it to virtually any audio
source (CD/DVD-players, TV set, PC, etc.). MSS has a built Bluetooth wireless signal transmission
protocol. Remote control (RC) is included.
Special features
• Bluetooth wireless signal transmission protocol
• Built-in player for audio files from USB flash port and SD card slot
• Headphone input
• Remote control
• MDF speaker cabinets
Caution! High voltage inside! To avoid the risk of electric
shock do not open or touch elements inside.

ENG
3
Operation Manual
Fig. 1. Active speaker
front panel
Active speaker panels
a Mode indicators
b MUTE: mute button
c INPUT: audio source selection button: BT / AUX / Player
d : Play / Pause (Player and Bluetooth modes)
e /VOL+ : next track (Player and Bluetooth modes) / volume up button (long press)
f /VOL- : previous track (Player and Bluetooth modes) / volume down button (long press)
g AUX: AUX input
h BASS: bass level up/down control knob
i OUTPUT: output jack for passive speaker connection
j TREBLE: treble level up/down control knob
k POWER ON/OFF: power switch
l Power cable
MUTE
INPUT
VOL+
VOL-
d
c
b
a
e
f
i
k
h
g
Fig. 2. Active speaker
rear panel
LR
OUTPUT
TREBLE BASS
POWER
ON
AC 230V~50Hz
OFF
AUX
j
l
SPS-615

ENG
4
2.0 Multimedia Speaker
System
with Bluetooth
m SD: slot for SD cards containing МР3 audio files
n USB: port for connecting a USB flash drive containing МР3 audio files
o : Headphone input
Remote control (Fig. 4)
a CONNECT: start the Search mode (previously installed Bluetooth-con-
nection is off)
b : ON/OFF power switch button (Standby mode)
c BT: Bluetooth mode selection button
d AUX: AUX selection button
e VOL +/-: volume up/down button
f / : previous track/next track (Player and Bluetooth modes)
g : track replay button (Player and Bluetooth modes)
h : Mute button
i USB/SD: selection between USB flash and SD card (Player mode)
j : Play / Pause (Player and Bluetooth modes)
k EQ: equalizer mode selection (Player mode only)
Notes:
• Before operating the RC, extract the battery,
remove the film protecting the battery from dis-
charge during transportation, and insert the
battery back into the RC.
• Use the remote control at an angle no more
than 30 degrees, no more than 7 meters away
from the IR receiver.
• Direct the RC at the IR receiver display on the
control panel.
• If the RC isn’t working, check the battery and
replace the discharged battery with a new one.
• Remove the battery from the remote control if
the device is left unused for a long period of time
(more than a week).
5. PREPARATION AND OPERATION
Speaker placement
• Place the speakers symmetrically to the listener at
least one meter away.
• Bass reflex ports are located at the rear panels of
speaker cabinets, please locate the speakers about
20–30 cm away from the wall or any other obstacle.
• Place the speaker system far away from supersen-
sitive monitors and TV sets, as insignificant image
distortion in these devices is possible.
Fig. 4. Remote control
e
e
bh
d
c
i
f
k
g
a
j
f
SD
USB
o
n
m
Fig. 3. Side panel

ENG
5
Operation Manual
Note. Sound quality is directly affected by correctness and reliability of the connection of
cables. It is recommended that cables included into the package contents of the MSS be used.
• Plug the MSS in a mains socket.
• Switch on the MSS by shifting the POWER switch k into the ON position on the active speaker rear
panel. Then switch on an audio signal source.
• Select a desired signal source by pressing short the button INPUT c on the control panel or buttons BT
c, AUX d or USB/SD i on the remote control (RC), after that the LED of the selected input will
illuminate on the control panel.
• Adjust the volume level with buttons VOL+/- e/f on the speaker control panel or with buttons VOL+/-
e on the remote control (see Fig. 4).
• Adjust the treble and bass levels with knobs TREBLE j and BASS h.
CD
Fig. 5. Audio sources connection diagram
MSS сonnecting and control
SPS-615 Multimedia Speaker System can be connected to virtually any audio source: DVD/CD, PC sound
card, etc. (see connection diagram in Fig. 5).
• Before making any connections, make sure that the MSS is unplugged. Connect the active speaker with the
passive one using the audio cable.
• To connect the MSS to a PC, MP3/CD players, first plug the RCA jacks of the 2RCA to mini-jack Ø 3.5 mm
signal cable (included) in the РС audio input h of the active speaker, then plug the mini-jack of the signal
cable to the LINE OUT port of the computer sound card or to the audio OUTPUT of MP3/CD player
terminals (see connection diagram in Fig. 5).
LR
OUTPUT
TREBLE BASS
POWER
ON
AC 230V~50Hz
OFF
AUX
Power cable
2RCA to mini-jack
signal cable
PC
PC
Player
Phone
SPS-615

ENG
6
2.0 Multimedia Speaker
System
with Bluetooth
• After using the MSS, mind to switch it off with the ON/OFF switch k (OFF position) and unplug the power
cable from the mains socket.
Bluetooth mode
• For the signal transmission in this mode it is necessary first to interconnect the MSS with a signal
source. For this press the button CONNECT a on the remote control to change the blue LEDs with
a constant illumination to intermittent one. The MSS will go to the search mode. Then on the signal
source (telephone, smartphone, etc.) choose the search mode of devices with Bluetooth. The
name of the MSS “SPS-615” will be displayed on the signal source screen, with which you need to
intercommunicate*. Select this device and the “connect” command.
• When connecting to the source it is possible to control the player with the remote control using
the buttons f, j.
AUX mode
• Press the INPUT button c on the top pannel or button AUX d on the RC to turn on AUX mode. AUX
selected input LED will illuminate on the control panel during the adjustment.
Player Mode
• The system will automatically enter the Player mode when a USB device is connected to the USB port
or an SD card is inserted into the corresponding slot**; or press the INPUT c button on the front panel or
the SD/USB i button on the remote control. The front panel will show the selected mode. The files will
automatically start playing.
• In the Player mode, Equalizer feature is available. Available 6 presets.
ST-BY mode
• To enter/exit this mode, press button b on the RC.
Mute mode
• To enter the MUTE mode, press button h on the remote control or button MUTE b on the control
panel. To exit the MUTE mode, press the button h on the remote control or button MUTE b on the
control panel again.
Note. The MSS control description can differ from the given one in this Operation Manual due to
the constant improvement of the software. The last version of the Operation Manual see on
www.sven.fi.
** The MSS operation may be incorrect if an SD card of 512 Mb capacity or lower is used. If a USB flash device of
8 Gb capacity or more is used, command processing time may be extended.
* If the MSS has been already listed in the device list of the signal source, then the second activation of the
search mode is not required. Select only this device and the “connect” command. You might have to enter “0000”
code to connect some models of devices via Bluetooth.

ENG
7
Operation Manual
If none of the above methods can solve the problem, please seek professional advice at your nearest
service center. Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound or the
sound is too quiet.
Distortion of sound.
The remote control
is not working.
Cause
The MSS isn’t connected to a mains
outlet.
The power switch is off.
Volume level is set at minimum value.
No connection via Bluetooth / wrong
connection or selection of an audio
signal source.
Large amplitude of the input signal.
The batter y is discharged.
Solution
Check the connection.
Turn on the switch.
Adjust the volume level.
Fulfill the interconnection procedure
via Bluetooth / connect or select an
audio signal source correctly.
Turn down the source volume and
the MSS volume.
Replace the battery with a new one.
6. TROUBLESHOOTING
Output power (RMS), W
Frequency range, Hz
Speaker diameter (tweeter + woofer), mm
Bluetooth version
Bluetooth operating range, m
Power supply, V/Hz
Dimensions (one speaker) (W × H × D), mm
Weight, kg
20 (2 × 10)
60 – 20,000
Ø 25 + Ø 76
2.1 + EDR
till 10
~230/50
128 × 226 × 150
2.85
Value
Parameter, measurement unit
7. TECHNICAL SPECIFICATIONS
Notes:
• Technical specifications given in this table are supplemental information and cannot give
occasion to claims.
• Technical specifications and package contents are subject to change without notice due to the
improvement of SVEN production.
SPS-615

2.0 Multimedia Speaker System
Automatic Voltage Regulator
Стабилизатор напряженияСтабилизатор напряжения
Automatic Voltage Regulator
2.0 Multimedia Speaker System 2.0 Multimedia Speaker System
SPS-619
SPS-615
Модель: SPS-615
Импортер в России: OOO «РЕГАРД», 109052,
РФ, г. Москва, ул. Нижегородская, д. 86, корп. Б.
Уполномоченная организация в России: ООО «РТ-Ф»,
105082, г. Москва, ул. Фридриха Энгельса, д. 75, стр. 5.
Условия гарантийного обслуживания смотрите
в гарантийном талоне или на сайте
www.sven.fi .
Гарантийный срок: 12 мес.
Срок службы: 5 лет.
Производитель: «СВЕН ПТЕ. Лимитед»,
176 Джу Чиат Роуд, № 02-02, Сингапур, 427447.
Произведено под контролем «Свен Скандинавия
Лимитед», 48310, Финляндия, Котка,
Котолахдентие, 15. Сделано в Китае.
Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,
№ 02-02, Singapore, 427447. Produced under the
control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,
Kotka, Finland, 48310. Made in China.
® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.
2.0 Multimedia Speaker
System
with Bluetooth