Sven NITRO User manual

www.sven.fi
OPERATION
MANUAL
NITRO
Game Racing Wheel

CONTENTS
1. DESCRIPTION ..................................................................................
2. SAFETY PRECAUTIONS ......................................................................
3. PACKAGE CONTENTS .......................................................................
4. SPECIAL FEATURES ...........................................................................
5. SYSTEM REQUIREMENTS ....................................................................
6. DESCRIPTION OF THE СONSTRUCTION ....................................................
7. CONNECTION AND INSTALLATION .......................................................
8. TROUBLESHOOTING .......................................................................
Congratulations on the purchase of Sven game racing wheel!
Please read this Operation Manual before using the unit and retain this Operation Manual in safe
place for future reference.
COPYRIGHT
© 2014. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The
information of this Manual is given on “as is” terms. The author and the publisher do not bear any
liability to a person or an organization for loss or damages which have arisen from the information,
contained in the given Manual.
UNPACKING
Unpack the device carefully. Make sure there are no accessories left in the box. Check up the
device for damage; if the product was damaged during transportation, address the firm which
carried out the delivery; if the product functions incorrectly, address the dealer at once.
2
2
2
2
2
3
5
9
Technical support is on www.sven.fi
ENG
1
Operation Manual NITRO

ENG
2
Game Racing Wheel
1. DESCRIPTION
NITRO Game Racing Wheel is specially designed for PC. Ergonomic design with rubber coating
and rubber suction caps ensure optimum comfort and stability. The modern optimized wheel
design delivers ultimate real gaming experience. 270 degree wheel rotation, adjustable sensitivity,
button mapping, unique nature wind conditioner create a surreal racing experience that will satisfy
any driving fan.
2. SAFETY PRECAUTIONS
• Do not disassemble or repair the device on your own. Maintenance and repairs should be carried out
by qualified staffof the service centre only.
• Protect the device from direct impact of high humidity, dust, strong magnetic fields, vibrations, high
temperatures, toxic liquids and gases.
• Instructions for device maintenance: for cleaning the case of the device please use clean soft
cloth. Do not use such solvents as gasoline or spirit for cleaning, since these solvents can damage
the surface of the device.
• Do not drop the device not to have it damaged.
3. PACKAGE CONTENTS
• Game Racing Wheel — 1 pc
• Pedal unit — 1 pc
• Fxation stands — 2 pcs
• Software CD disk —1 pc
• Operation manual — 1 pc
• Warranty card — 1 pc
4. SPECIAL FEATURES
•Ergonomic design of game racing wheel
•Wheel diameter – 10" (254 mm)
•Steering angle – 270 degrees
•Supports: Windows XP/Vista/7/8
•USB Interface
•Built-in vibration feedback and cooling fan for more realistic effect
•Indication of accelerating and braking force
•Three-stage sensitivity adjustment to adapt to different driving racing games
•Two axes, D-Pad, Tiptronic lever for changing gears, 12 additional keys
•Rubber coating of the wheel for comfortable driving
• 8 reprogramming buttons
•6 rubber suction caps and 2 fixation stands for secure fixation to the table
• Digital and Analog Modes available
•Spring-loaded accelerator and brake pedals (included)
5. SYSTEM REQUIREMENTS
•USB port available
•Operational System Windows XP/Vista/7/8

m
o
p
q
n
l
Fig. 3. Key panel
7
5
1
1
1
2
6
8
MODE
9
10
Sensitivity
LO MID HI
j
g
Red Orange OrangeGreen Green Red
Fig. 1. Front view
6. DESCRIPTION OF THE CONSTRUCTION
aRacing wheel
bRubber coating
cButtons 1, 4
dPaddle shifters
eVentilation grids
fKey panel
gBraking indication
hButtons 2, 3
iLever for changing gears
jAccelerating indication
kRubber suction
caps
lButtons 7–12
mD-Pad
nButtons 9–10
oMODE button
pON/OFF MODE
indication
qSensitivity control
rFoot pedal port
sHeadlights
tUSB Cable
uBrake pedal
vAcceleration pedal
wFoldable stand for feet
Fig. 2. Lever for changing gears
–
+
R
k
j
d
h
b
b
a
c
d
e
i
e
g
f
ENG
3
Operation Manual NITRO

a
d
i
d
r
k
t
s
k
f
Fig. 4. Back view
Fig. 5. Foot pedal unit and 2 fixation stands
v
u
w
ENG
4
Game Racing Wheel

ENG
5
Operation Manual NITRO
Fig. 6
7. CONNECTION AND INSTALLATION
•Install the device on an even surface (for example, on a table) on its suction caps. If necessary
fasten it with the two fixation stands (Fig. 5).
•Connect the pedal unit to the device (Fig. 5) via the pedal unit cable to RJ-11 jack r, then
connect USB cable tof the device to the available USB port of the computer.
•Insert the Software CD disk into the disk drive of your PC and launch setup.exe to install drivers
on your PC. Go to the game controller settings in the control panel and Game Controllers window
should appear on the Desktop of your PC (Fig. 6).
Wheel Test
•Axes Test. Pass to the “Test Page” bookmark (see Fig. 7), rotate the wheel from left to right and
make sure that the X-axis (“+” cross-cursor) in the “Axes Information” window moves from left to right
correctly. If the cross cursor is not at the center of the window, please enter “Calibration Page” to
calibrate it.
•Button Test. Press the wheel buttons to see if button 1 to 12 in the “Test Page” turns red for each
button action (see Fig. 7).
•D-PAD Test. Press each direction of the D-PAD (UP, DOWN, RIGHT, LEFT and 45 degree for each
direction) to see if the cursor in “Povinfo” is moving correctly (see Fig. 7).

ENG
6
Game Racing Wheel
•Wheel calibration. This option is only used for calibrating wheel centering fault under analog mode
(the indicator LED turns red): when the cross cursor is not centered in the X/Y Axis as seen in the
interface, please press “Default” and then press “Set” (Fig. 8).
•Motors test. Enter “Effect Page” (see Fig. 9) to test motors. Rotate the wheel and check if the left
motor vibrates. Press the left wing and right wing dand check if the right motor vibrates.Vibration
feedback force can be changed by moving the cursor to the right or the left along the “Rumble-
Intensity” line (fig. 9).
•Driver Uninstall (reinstall). Restart the driver installer. Click “No” to remove the driver. Click “Yes” to
reinstall the driver (see Fig. 10).
•At the end in the appeared window “LS-USBMX1/2/3 steering…” (see Fig. 11) click “Finish” to
confirm and quit.
Fig. 7 Fig. 8

ENG
7
Operation Manual NITRO
Fig. 9
Fig. 11Fig. 10

ENG
8
Game Racing Wheel
Button Programming (no memory)
•Program buttons 1, 2, 3, 4, 5, 6, 7 and 8, which by default assigned functions to gear stick i, left
wing and right wing d, gas pedal v, brake pedal u, buttons 11 and 12. Which, you define by
testing. If for some reason they need to be reprogrammed, to set other functions, do the following
guidelines:
•Program Setup (no programming function under NEGCON Mode). Enter “Test Page” (see Fig. 8),
press button 9 and button 10 nat the same time. Hold for 3 seconds until program LED turns green.
Press the programmable button. Program LED starts blinking. Press program source button. Program
LED turns off. Program is set.
•Clear Single Program. Press button 9 and button 10 at the same time. Hold for 3 seconds and
program LED turns green. Press programmable button. Program LED starts blinking. Press progra-
mmable button again. Program LED turns off. Single program is cleared.
•Clear All Programs. Press button 9 and button 10 at the same time. Hold for 3 second until
program LED turns green. Release the buttons. Press button 10 and hold for 4 seconds. Program
LED turns off. All programmed buttons are cleared. Default is restored.
Wheel Sensitivity Adjustment (3 levels):
•Wheel sensitivity can be adjusted by a toggle switch Sensitivity q. There are 3 optional sen-
sitivities: «LO», «MID», «HI».
•By using switch Sensitivity qcan be set three levels of sensitivity steering in position “LO” for the
full twist “wheels” to turn the steering wheel to lock, i.e., all 135 degrees. In the position “MID”
enough to turn the rudder to 2/3 speed, and in position “HI” maximum position is reached at the
third steering.
Mode Button Function:
•Press Select + Start (9+10) within 3 seconds to switch the mode, the Mode indicator turns green,
and then press the button of the left direction on the digital unit. The analog mode is activated after
that. In the digital mode the static maximum activation/deactivation of corresponding axes take place
during depressing the pedal, i.e. there is only “ON/OFF” position there. In the analog mode a signal is
transmitted depending on the pressure force of pedals, i.e. smoothly. The mode of buttons will not
function, when a certain mode has been already set on the console. LED indication of a mode
testifies about any current active mode.
Operation without pedal unit:
•Game racing wheel is equipped with paddle shifters d, that substitute acceleration and brake
pedals: the left paddle shifter functions as a brake pedal, while the right paddle shifter functions as
an acceleration pedal.
Note. Game racing wheel is equipped with braking indication gand accelerating indication
jsee. Fig. 1. With a smooth pressing the acceleration pedal indicator lights up green,
picking up speed indicator will light orange, then red. Depending on the smoothness of
dropping speed indicator lights green, orange and red colors.

ENG
9
Operation Manual NITRO
8. TROUBLESHOOTING
Problem
After installation of the software,
game controller does not work
normally.
Motors have no vibration
function in a racing game.
After entering game, some
analog axis will automatically
operate.
After entering the game,
vibration feedback operates
automatically.
During the game vibration
feedback is insufficient.
Solution
А. Check whether the controller’s link cable is strongly
connected to PC.
B. Make sure that status indication for Game Controllers after
installation is Confirm.
C. Check whether controller’s settings have no conflicts with
other peripherals’ settings.
D. Restart your PC, if the controller still doesn’t work
normally.
After exiting the game, disconnect the controller from the
USB port and connect it again. If it still can’t work normally,
please restart the computer.
The steering wheel hasn’t been calibrated or hasn’t been
confirmed after calibrations. Enter Option – Controllers –
Dead Zone to adjust the range of the dead zone, and make
sure the axes are in the range of the dead zone.
Enter Force Feedback and calibrate it.
Enter Force Feedback and set force of feedback.
If none of the above mentioned solutions removes the problem, please refer to nearest authorized
service center for consultation by qualified specialist. Never try to repair the device on your own.
Dead Zone Effect ZoneEffect Zone
Axes
Axes

Модель: Nitro
Импортер вРоссии: ООО «СКАНДИТРЕЛ»,
111024, РФ, г. Москва, ул. Авиамоторная, д. 65, стр. 1.
Уполномоченная организация вРоссии: ООО «РТ-Ф»,
105082, г. Москва, ул. Фридриха Энгельса, д. 75, стр. 5.
Условия гарантийного обслуживания смотрите
вгарантийном талоне или на сайте www.sven.fi
Гарантийный срок: 12 мес. Срок службы: 2 года.
Производитель: «СВЕН ПТЕ. Лимитед»,
176 Джу Чиат Роуд, №02-02, Сингапур, 427447.
Произведено под контролем «Свен Скандинавия
Лимитед», 48310, Финляндия, Котка,
Котолахдентие, 15. Сделано вКитае.
Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,
№02-02, Singapore, 427447. Produced under the
control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,
Kotka, Finland, 48310. Made in China.
® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.
2.0 Multimedia Speaker System
Automatic Voltage Regulator
Стабилизатор напряженияСтабилизатор напряжения
Automatic Voltage Regulator
2.0 Multimedia Speaker System2.0 Multimedia Speaker System
SPS-619
NITRO
Game Racing Wheel