Swann SWIFI-WDOORPK4 User manual

1
EN
Window/Door Alert Sensor
Sensor de alerta de ventana/puerta
Capteur d’alerte de fenêtre/porte
Sensore di allarme nestra/porta
Fenster/Tür-Warnsensor
EN Quick Start Guide ES Guía de inicio rápido FR Guide de démarrage rapide
IT Guida rapida DE Schnellstartanleitung

2
EN
OVERVIEW
Magnet
Sensor
Status light < 10mm(3/8”)
Cover screw
Remove to access battery compartment
and QR code (located under cover)

3
EN
BATTERY INSTALLATION
1Unscrew the sensor cover with the supplied screwdriver and lift it off.
2Insert the supplied two AAA batteries into the battery compartment according to the polarity
markings (+ and -) shown. Pairing mode will automatically activate on the sensor for 3 minutes
when batteries are inserted. The sensor status light will blink blue slowly during pairing mode.
If you have downloaded the Swann Security app on your mobile device (see page 4), you can
proceed to the pairing process (see page 5).
Note: Pairing mode on the sensor can be activated at any time by re-inserting the batteries.
3 Afteryouhavepairedthesensor,replacethecoverandscrewitrmlyinplace.
4Should you need to replace the batteries in the future, there is no need to re-pair the sensor.
Simply wait for pairing mode to timeout (3 minutes), after which the sensor will automatically
reconnecttothepreviouslyconguredWi-Finetwork.

4
EN
DOWNLOAD THE SWANN SECURITY APP
1Download the latest version of the Swann Security app from the Apple App Store® or Google
Play™ Store on your iOS or Android device. Simply search for "Swann Security".
2Open the app and create your Swann Security account by tapping “Not yet registered? Sign
Up” atthebottomofthescreen.Then,activateyourSwannSecurityaccountbyconrmingthe
vericationemailthatissenttotheregisteredemailaddress.

5
EN
Open the Swann Security app and tap the Pair Device button on the screen. If you have already paired
a device, tap the menu icon in the top left and select “Pair Device”. The app will now guide you
through the pairing process and set up your sensor.
Before you begin, have the sensor with you and be close to your router. Please note that the sensor
canconnecttoa2.4GHzWi-Finetworkonly.
SET UP THE SENSOR

6
EN
Take the time to choose a location and properly check the orientation of the sensor and the magnet.
The sensor and magnet should ideally be positioned in a way that when the window or door is closed,
they are aligned side by side, less than 10mm (3/8”) apart. See Mounting Examples on the next page.
Also,makesurethesensorlocationhasstrong,reliableWi-Fireceptionavailablesoyoucanget
timelyalerts.Asageneralrule,theneareryoursensoristoyourWi-Firouter,thebetterthewireless
connectionquality.YoucanexpandtheWi-FicoverageofyourcurrentnetworkbyinstallingaWi-Fi
range extender.
1For reliable bonding, clean the surface where the sensor and magnet will be mounted with an
alcohol/cleaning wipe, and let dry.
2Fit the sensor and the magnet with appropriate double-sided tapes.
3Select a location on the window/door. Attach the sensor to the window/door frame and the magnet
tothewindow/door.Makesurethesensorcoverwillbeaccessibleinthenalposition(incaseof
battery replacement/re-pairing).
4 Pressrmlyontosurfacefor60secondseachtosecure.
5To test the sensor, simply open the window/door. The app will send you a push
notication,forexample,“Contact sensor has been opened on Front Door”.
Closethewindow/door.Theappwillsendyouanothernotication,forexample,
“Contact sensor has been closed on Front Door”. The sensor tile will also
automatically update its status in the app, as shown on the right.
Note: You can use the Modes feature in the app to congure whether or not to
receive “Opened” and “Closed” push notications when the sensor is in Home,
Away or Night mode.
MOUNTING THE SENSOR

7
EN
HELP AND RESOURCES
Status Light Guide
Thestatuslightonthesensortellsyouwhatishappeningwiththedeviceconnection.Whenthe
sensor is functioning normally, the status light will be off (unless it is out of battery/unpaired).
Mounting Examples
Door installation
Cabinet
installation
Windowinstallation
Swann Security App Manual
Access the Swann Security app manual (Menu > User Manual) at any time to learn more about
navigating through the various screens and functions in the app.
Slow Blinking Blue Pairing mode
Sensor Battery Level
You can check the battery level of the sensor in the app: Devices tab > Sensor > Battery %
Solid Blue (5 seconds) Change in Open/Closed state. Connecting to Wi-Fi.

8
ES
GENERALIDADES
Imán
Sensor
Luz de estado < 10mm(3/8”)
Tornillo de la cubierta
Da acceso al compartimiento de baterías y el
código QR (ubicado debajo de la cubierta)

9
ES
INSTALACIÓN DE LA BATERÍA
1Desatornille la cubierta del sensor con el destornillador provisto y levántela.
2Coloque las dos baterías AAA incluidas en el compartimiento de baterías según las marcas de
polaridad (+ y -) que se muestran. El modo de vinculación activará automáticamente el sensor
durante 3 minutos cuando se coloquen las baterías. La luz de estado del sensor parpadeará de
azul lentamente durante el modo de vinculación. Si ha descargado la aplicación Swann Security en
su dispositivo móvil (vea la página 10), puede pasar al proceso de vinculación (vea la página 11).
Aviso: El modo de vinculación en el sensor se puede activar en cualquier momento reinsertando
las baterías.
3 Luegodehabervinculadoelsensor,coloquelacubiertayatorníllelahastaquequederme.
4Si debe reemplazar las baterías en el futuro, no es necesario revincular el sensor. Simplemente
espereaquenaliceeltiempodevinculación(3minutos),luegodelcualelsensorserevinculará
automáticamentealaredWi-Fipreviamentecongurada.

10
ES
DESCARGUE LA APLICACIÓN SWANN SECURITY
1Descargue la última versión de la aplicación Swann Security de las tiendas App Store® de
Apple o Google Play™ en su dispositivo iOS o Android. Simplemente busque "Swann Security".
2Abra la aplicación y cree una cuenta de Swann Security; para ello, haga clic en el botón “¿Aún no
se ha registrado? Regístrese” en la parte inferior de la pantalla. A continuación, active su cuenta
deSwannSecurityalconrmarelcorreoelectrónicodevericaciónqueseenvíaaladirección
de correo electrónico registrada.