Symmons Carrington Trim Series Manual

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3056 REV A 09/02/14
4400-TRM, 4401-TRM
Carrington™Trim Series
Operation & Maintenance Manual
Model Numbers Specifications
4400-TRM Valve Trim
4401-TRM Shower Trim
Shower trim includes shower escutcheon kit and 3 mode
showerhead with standard 2.5 gpm (9.5 L/min) ow
restrictor. Valve trim includes shower escutcheon kit only.
Components made from metal and nonmetallic materials
plated in standard polished chrome nish.
Modifications Compliance
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
-CRP Cross handle in place of white
insert handle
-LAM Metal finish insert handle
-STN Satin nickel finish
-ASME A112.18.1; CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.

2
Dimensions
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3056 REV A 09/02/14
Measurements
A Ø 2 5/8", 67 mm
B 1/2", 13 mm
C 9 1/4", 235 mm
D
Male 1/2" I.P.S. thread must
protrude 1/2" from
nished wall
E Ø 7 1/2", 191 mm
F 77", 1956 mm
G 3 1/8", 79 mm
H 42", 1067 mm
I 3 1/8", 79 mm
J 2 5/8", 67 mm
K(Rough in)
2" ± 1/2", 51 mm ± 13 mm
Notes:
1) All dimensions measured from nominal rough-in (see K as reference).
2) Dimensions are subject to change without notice.
GG
A
B
B
E
E
H
H
F
F
C
C
I
I
J
J
K
K
Floor
Floor
DD

3
Parts Breakdown
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3056 REV A 09/02/14
Replacement Parts
Item Description Part Number
A Shower Arm 304
B Showerhead 442SH
C
D
E
F
Handle
Set Screw
Flange
O-ring
DF-28-LPO
G Lock Nut T-20-PL
H Washer 40B-PL
I Dome Cover DF-11
J
K
Mounting Scews
Shower Escutcheon DF-14
L Escutcheon Plate 7.5-ETCH
Notes:
1) Append -STN to part number for satin nickel nish.
2) Append -1.5 or -2.0 to showerhead for low ow.
Required for Installation
Adjustable wrench
Phillips head screwdriver
Plumber tape
A
J
B
H
I
L
D
K
E
G
F
C

4Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3056 REV A 09/02/14
Installation
Note:
For valve body installation, please
see valve body installation guide.
1) Install shower escutcheon
plate (L) and shower escutcheon
(K) to shower valve. Secure with
two screws (J).
2) Install dome cover (I) and
washer (H) to valve and secure
with lock nut (G).
3) Install o-ring (F), ange (E), and
handle (C) to valve and secure
with screw (D).
Note: Handle should be facing the
6 o'clock position.
4) Install shower arm (A) to pipe
tting. Turn clockwise to secure.
5) Install showerhead (B) to shower
arm (A) turning clockwise to
tighten.
1
2
3
J
L
K
1
2
I
G
H
1
2
B
A
1
2
D
E
C
F
2
1
A

5Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3056 REV A 09/02/14
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Troubleshooting Chart
Problem Cause Solution
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
1) Turn shower handle counterclockwise approximately
1/4 turn to put valve in cold position.
2) Turn shower handle counterclockwise approximately
1/2 turn to put valve in warm position.
3) Turn shower handle counterclockwise approximately
3/4 turn to put valve in hot position.
Operation
Temperature Control