Symmons Vella S-2610 Series Quick guide

Quick Install Guide Vella Kitchen Faucet, S-2610
Step 2
Attach faucet
Step 5
Connect water
supply lines
nished deck
front view
Step 1
Fasten deck plate
(optional)
Step 6
Flush supply lines
and check for leaks
Step 4
Attach counterweight
Step 3
Connect pull-out
spout hose
Pull-out spout
operation
HOT
COLD
Spray
on / off
red stripe
blue stripe
Step 7
Turn limit stop clockwise to
limit handle turn to the hot
position if desired.
1/8 "
Model Numbers
S-2610..... Kitchen Faucet
Decorative Finish Codes
Append to part numbers when applicable
-STN Satin Nickel
-STS Stainless Steel
-- Chrome (standard)
Tools & Materials Need Help?
Symmons customer service:
[phone], [phone]
Email: [email protected]
Monday - Friday 7:30 am - 6:00 pm EST
www.symmons.com/service
• Technical help
• Product information
• Warranty policy
Kitchen Faucet S-2610
Installation and Service Instructions
Vella®

Step 1 Attach deck plate (optional)
Installing deck plate is optional. Plate is typically used when
replacing a faucet to cover existing holes.
Step 2 Attach faucet assembly to deck
nished deck
front view
single hole mount
without deck plate
front view
nished deck
align
at edges
Step 3 Connect pull-out spout hose
Step 4 Attach counterweight to hose
blue stripe
red stripe
no stripe
washer
~25 inches
(635 mm)
Caution: If replacing an older faucet ensure water supply is
turned OFF before removing and then turn faucet handles ON
to relieve water pressure.
Installation Instructions
Page 2
Installation Instructions
Page 2

Step 5 Connect supply lines
Step 6 Flush supply lines and check for leaks
HOT
COLD
washer
Care of faucet finish
Clean nish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve nish area.
Removing handle and cartridge
Replacing cartridge and handle
Valve cartridge replacement
1/8"
1
2
1/8"
Page 3Page 3

3/4" dia. (19 mm)
deck plate hole size
7/8" (22 mm) min
1-1/8" (29 mm) max
Finished deck
thickness
1-5/8" max
(41 mm)
4"
(102 mm)
1-1/8" dia (29 mm)
center spout hole size
1-1/4" (32 mm) min
1-1/2" (38 mm) max
deck plate
10-1/8" (257 mm) deck plate
2-5/8" (67 mm)
Dimensions Vella Kitchen Faucet, S-2610
deck plate
1/4" (6 mm)
*Single hole mount without
deck plate installed
*
Finished deck thickness
1-7/8" (48 mm) max
2-3/8"
(62 mm)
11"
(280 mm)
8-1/4"
(209 mm)
10-1/8"
(258 mm)
12-1/8"
(308 mm)
10" (255 mm)
*10-3/4"
(273 mm)
*8"
(203 mm)
*9-7/8"
(251 mm)
*11-7/8"
(302 mm)
8"
(203 mm)
Note: Dimensions subject to change without notice.
Replacement Parts
Part Number Item
valve cartridge
Pull-out spout hose washer
Washer for exible
metal type hose
Washer for nylon
type hose
KN-4
SC-12W
KN-236A
LN-216
LN-15-1.5-NA
washer
see table
Parts Assembly Vella Kitchen Faucet, S-2610
handle*
screw, 1/4-28 x 5/16
plug button*
collar*
retaining ring
pull-out spout*
standard aerator
2.2 gpm
valve cartridge
faucet body*
deck plate*
gasket
ber washer
ange nut
ber washer
mounting nut
pull-out spout
supply hose
(metal or nylon type)
lead weight
screws
1/4-20 x 1/2
adapter
washer
Ordering replacement parts:
Symmons customer service: [phone],
[phone] M-F 8:00 am - 7:30 pm EST
Symmons distributors: www.symmons.com
hot supply hose
with red stripe
cold supply hose
with blue stripe
3/8"
*
Note: When ordering parts for faucets with an
optional decorative nish, append appropriate
three letter sufx code to part numbers marked
with an asterisk (*
).
aerator ow rates
2.2 gpm (8.3L/min)
1.5 gpm (5.7L/min)
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2019 Symmons Industries, Inc. ■symmons.com ■[email protected] ■ ZV-497 REV C ■053119
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects,
or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.