Symmons The Smart Choice Water Dance 1-7480-TRM Manual

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3069 REV 0 09/22/14
1-7480-TRM
Water Dance™Two Wall Shower Trim
Operation & Maintenance Manual
Model Numbers Specifications
1-7480-TRM Two Wall Shower Trim Two wall shower trim with lever handle includes
30" slide bar with cradle for hand shower, individual
volume controls for each outlet, in-line vacuum breaker,
exible metal hose, 3 body sprays, 3 mode hand shower
and 3 mode showerhead with 2.5 gpm (9.5 L/min)
ow restrictor. Components are made from metal and
nonmetallic materials plated in standard polished
chrome nish.
Modifications Warranty
-STN Satin nickel finish Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.

2
Dimensions
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3069 REV 0 09/22/14
Measurements
A Ø 2 1/4", 57 mm
B 5", 127 mm
C 6 1/2", 165 mm
D Ø 1 11/16", 43 mm
E 8", 203 mm right or left
F 2 1/8", 54 mm
G
1/2" IPS thread must be
recessed 1/4" from
nished wall
H 12", 305 mm
I Ø 3 1/8", 79 mm
J Ø 7 1/2", 191 mm
K 12", 305 mm
L 3 1/2", 89 mm
M 36", 914 mm
N 41", 1041 mm
O 3 1/8", 79 mm
P 2 7/8", 73 mm
Q(Rough in)
2 5/8"± 1/4, 67 mm ± 6 mm
R 1/2", 13 mm
S 3/4", 19 mm
T
Female 1/2" IPS thread
must be recessed 1/4" from
nished wall.
Notes:
1) All dimensions measured from nominal rough-in (see Q as reference).
2) Dimensions are subject to change without notice.
AA
B
B
F
F
C
C
D
D
SS
SS
TT
RR
E
E
I
I
H
H
H
H
M
M
J
J
N
NP
P
O
O
K
K
L
L
Q
Q
Floor
Floor
G
G

3
Parts Breakdown
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3069 REV 0 09/22/14
Replacement Parts
Item Description Part Number
A
B
Body Spray
Body Spray Flange 4-412
C Showerhead 4-143
D
E
Shower Arm
Shower Arm Flange 300
F
G
H
J
K
Volume Control Handle
O-ring
Spindle Extension
Set Screw
Volume Control Dome
HF-147
IVolume Control
Escutcheon HF-138
L Sleeve HF-139
M Wall Elbow EF-105
N Hand Shower EF-101
O
BB
Vacuum Breaker
60" Hose EF-104
P
Q
R
Cap
Mounting Hardware
Slide Bar Assembly
SC-115
S
T
W
X
Set Screw
Flange
Shower Handle
O-ring
HF-28-LAM
U Lock Nut SC-18
V Shower Dome Cover SC-13B-PL
Y Dial HF-117
Z
AA
Mounting Screws
Shower Escutcheon HF-112
Notes:
1) Append -STN to part number for satin nickel nish.
Required for Installation
Adjustable wrench
Phillips head screwdriver
Allen wrench (1/8")
Plumber tape
A
B
C
E
N
R
D
M
BB
O
S
P
Q
T
V
U
W
X
Y
ZAA
G
F
K
J
I
H
L

4
Installation
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3069 REV 0 09/22/14
Note:
For valve body installation, please
see valve body installation guides.
1) Install shower escutcheon (AA)
to shower valve. Secure with two
screws (Z).
2) Attach volume control
escutcheon (I), and spindle
extension (H) to volume control
valve . Secure with sleeve (L).
3) Install volume control dome
cover (K), o-ring (G), and volume
control handle (J) to volume
control valve and secure with set
screw (F).
Notes: Handles should be facing
the 6 o'clock position.
4) Install shower dome cover (V) and
dial (Y) to shower valve and
secure with lock nut (U).
5) Install o-ring (X), flange (T), and
shower handle (W) to valve and
secure with set screw (S).
Notes: Handle should be facing
the 6 o'clock position.
Temperature indicator will be
facing the 12 o'clock position.
6) Install body spray (A) and
flange (B) to pipe fitting.
Turn clockwise to secure. Secure
ange with set screw. Repeat for
remaining body sprays.
1
2
Z
AA
1
2
H
L
I
1
2
F
G
K
J
1
2
V
U
Y
1
2
T
S
X
W
1
2
3
A
B

5
Installation
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3069 REV 0 09/22/14
7a) Dry Wall Option: R emove
upper and lower caps (P) from
30" slide bar brackets. Place
30" slide bar (R) into desired
position. Using brackets as a
guide, carefully drill 3/16" holes
into wall. Remove 30" slide bar
and install anchors.
Notes: Make sure that 30" slide
bar holes and bracket holes are
aligned before drilling. Before drilling
bottom hole, make sure 30" slide
bar is plumb.
7b) Stud Option: R emove upper
and lower caps (P) from 30"
slide bar brackets. Place
30" slide bar (R) into desired
position. Using brackets as a
guide, carefully drill 1/8" pilot
holes into stud.
Notes: Make sure that 30" slide
bar holes and bracket holes are
aligned before drilling. Before
drilling bottom hole, make
sure 30" slide bar is plumb.
8) With 30" slide bar (R) in position,
secure to wall using screws (Q).
Replace upper and lower caps (P)
onto 30" slide bar brackets.
4
4
1
1
2
2
3
R
P
P
1
1
2
2
3
R
P
P
2
2
1
Q
RR
P
P