REGULATORY INFORMATION AND CERTIFICATIONS
RF Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada (IC) certifications: This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicable aux appareils numeriques de la
class B prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des Communications du Canada.
FCC certifications and regulatory information (USA only)
FCC Part 15 Class B: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
These devices may not cause harmful interference, and (2) These devices must accept any interference received, including
interference that may cause harmful operation.
RADIO FREQUENCY INTERFERENCE (RFI) (FCC 15.105): This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures: (1) Re-orient or relocate the receiving antenna; (2) Increase the separation between the equipment and the receiver; (3)
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (4) Consult the dealer or an
experienced radio/TV technician for help.
Declaration of Conformity (FCC 96-208 & 95-19): Synapse Wireless, Inc. declares that the product name “ZHA-S1” to which
this declaration relates, meet the requirements specified by the Federal Communications Commission as detailed in the following
specifications:
•Part 15, Subpart B, for Class B equipment
•FCC 96-208 as it applies to Class B personal computers and peripherals
•This product has been tested at an External Test Laboratory certified per FCC rules and has been found to meet the FCC,
Part 15, Emission Limits. Documentation is on file and available from Synapse Wireless, Inc.
If the FCC ID for the module inside this product enclosure is not visible when installed inside another device, then the outside of the
device into which this product is installed must also display a label referring to the enclosed module FCC ID. Modifications (FCC
15.21): Changes or modifications to this equipment not expressly approved by Synapse Wireless, Inc., may void the user’s authority
to operate this equipment.
CERTIFICATIONS
Model : ZHA-S1
Contains FCC ID : U9O-SM220
Contains IC : 7084A-SM220
RoHS 3 :2011/65/EU (2015/863)
EU REACH :(EC) No 1907/2006
D4i Certified
DALi-2 Certified