syslogic C Series Operator's manual

user documentation
DOC_C-Series_Touch-PC_V1.1.docx Page 1 of 37
© 2019 Syslogic Datentechnik AG | All rights reserved
TFT/HB101PU81xxx-C001y
Document Ordercode: DOC/C-Series_Touch-PC
Revision
Date
Author
Modification
0.1
16.11.2018
D. Lagler
Preliminary version
0.2
21.11.2018
D. Lagler
Spelling corrections
0.3
06.03.2019
D. Lagler
Added maintenance part and operating conditions
1.0
08.04.2019
D. Lagler
Added pinout of mPCIe and m.2, defined use cases
1.1
07.06.2019
D. Lagler
Mounting instructions and power consumption revised

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 2 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
Contents
1Introduction 5
1.1 General Remarks 5
1.2 Explanation of Symbols 5
1.2.1 Danger warnings 5
1.2.2 Warnings indicate the following: 5
1.2.3 Information pictograms indicate the following: 6
1.3 Copyright note 6
1.4 Contents of this Documentation 6
1.5 Additional Products and Documents 6
1.5.1 Hardware Products 6
1.5.2 Software Products 6
1.5.3 Documents 6
1.6 Items delivered 7
1.1.1. Built-in version 7
1.1.2. To be purchased separately 7
1.7 Installation 7
1.8 Safety Recommendations and Warnings 7
1.8.1 General warnings 7
1.8.2 EMC 7
1.8.3 Electro Static Discharge 8
1.8.4 Battery 8
1.8.5 Hot surface 8
1.9 Life Cycle Information 8
1.9.1 Transportation and Storage 8
1.9.2 Assembly and Installation 8
1.9.3 Operation 8
1.9.4 Maintenance and Repair 8
1.9.5 Disposal 9
1.9.6 RoHS 9
1.9.7 WEEE 9
2Product Description 10
2.1 Introduction 10
2.1.1 Benefits of Syslogic`s Projected capacitive touch panels 10
2.1.2 Intended use of Projected Capacitive Touch Panels 10
2.2 Device Variants 10
Standard temperature 10
Extended temperature 10
2.3 Accessories 11
2.4 Features 11
2.4.1 TFT/HB101PU81xxx-C001y 11
2.4.2 Power supply 12
2.4.3 X1 (only on selected products) 12
2.4.4 X2 (for future use; only on selected produtcts) 13
2.4.5 USB Interface 13
2.4.6 Ethernet LAN Interface 13
2.4.7 Display 13
2.4.8 Frontside Status LEDs 14
2.4.9 Antennas (only on selected products) 14

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 3 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2.4.10 Internal connectors 14
SO-DIMM 14
CMOS Battery 14
Fuse 14
USB 2.0 14
m.2 slot 15
mPCIE slot 16
2.5 Touch Screen 16
2.5.1 Basic functions of the touch screen 16
2.6 Display brightness 16
2.7 Maintenance 17
2.7.1 Opening the device 17
2.7.2 Re-assemble the device 18
2.7.3 Internal overview 18
2.7.4 Replace m.2 flash memory 19
2.7.5 Mount/replace mPCIe module 19
2.7.6 Replace CMOS battery 20
2.7.7 Replace fuse 20
2.7.8 Replace SODIMM 20
2.7.9 Re-assemble the device (backplate) 22
2.7.10 Replace gap pad 22
2.7.11 Cleaning the glass front 22
2.7.12 Cleaning the metal housing 22
2.7.13 Spare parts 23
3Installation Description 24
3.1 Mounting 24
3.1.1 TFT/HB101PU81xxx-C001y 24
3.2 Installation and cabling 26
3.2.1 Introduction 26
3.2.2 Powering the C-Series Touch-PC System 26
3.2.3 Cabling the interfaces 26
3.2.4 Grounding 27
3.2.5 Cabling of communication links 28
4Technical Data 30
4.1 General Electrical Data 30
4.2 EMI / EMC Specification 31
4.3 Mechanical Data 32
4.3.1 TFT/HB101PU81xxx-C001y 32
4.4 Use cases 33
5Firmware 34
5.1 Software Structure 34
5.2 Firmware Functions 34
5.3 Application Programming Interface (API) 34
5.4 Supported Operating System 34

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 4 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
6Product Revision History 35
6.1 Hardware 35
6.2 Firmware 35
6.3 Errata 36
7Manufacturer Information 37
7.1 Contact 37
7.2 Warranty 37
7.3 RMA Service 37
List of Tables
Tab. 1 Projected capacitive touch panel versions 10
Tab. 2 Projected capacitive touch panel accessories 11
Tab. 3 Power supply connector (1x3 pin) 12
Tab. 4 Serial Port X1 12
Tab. 5 Frontside Status LEDs 14
Tab. 6 Pinout internal USB ports 14
Tab. 7 Pinout m.2 15
Tab. 8 Pinout mPCIe 16
Tab. 9 TFT/HB101PU81xxx-C001y Mounting dimensions 24
Tab. 10 General Absolute Maximum Ratings 30
Tab. 11 General Recommended Operating Conditions 30
Tab. 12 Maximum cable length 30
Tab. 13 General Electrical Characteristics 31
Tab. 14 General Switching Characteristics 31
Tab. 15 Hardware Revision State 35
Tab. 16 Firmware Revision State 35
List of Figures
Fig. 1 TFT/HB101PU81xxx-C001y (Front) 11
Fig. 2 TFT/HB101PU81xxx-C001y (Back) 11
Fig. 3 Required Cut out HBxxxPU8yyy-zZZZ 24
Fig. 4 Screws to hold the mounting Frame 25
Fig. 5 Fully installed C-Series Touch-PC 25
Fig. 6 Additional grounding of the cable shields at the entry point of a cabinet 27
Fig. 7 Isolated communication link 28
Fig. 8 Non-isolated communication link with common chassis potential 29
Related Documents

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 5 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
1Introduction
1.1 General Remarks
The content and presentation of this document has been carefully checked. No responsibility is accepted for any errors or omissions in the
documentation.
Note that the documentation for the products is constantly revised and improved. The right to change this documentation at any time without
notice is therefore reserved.
Syslogic is grateful for any help referring to errors or for suggestions for improvements.
The following registered trademarks are used:
IBM-PC, PC/AT, PS/2 trademarks of IBM Corporation
SPI trademark of Motorola
I2C trademark of Philips Corporation
Intel Atom trademark of Intel Corporation
Windows Embedded Compact trademark of Microsoft Corporation
Windows Embedded Standard trademark of Microsoft Corporation
All other trademarks appearing in this document are the property of their respective company.
1.2 Explanation of Symbols
1.2.1 Danger warnings
The following information is for your personal safety and the prevention of damage to the product described or connected devices.
Safety instructions and warnings for the prevention of danger to the life and health of users or service personnel and for the prevention of
damage are highlighted in this document by the pictograms specified below. Warning and Information pictograms are shown in this document.
1.2.2 Warnings indicate the following:
Death, serious injury or substantial material damage may occur if the related safety measures are not implemented.
The individual Warning pictograms have the following meaning:
Attention! General!
Is an instruction that must be observed in order to ensure protection before, while
and after using the device. The correct procedure must be observed.
Attention! Electric shock!
Persons may be exposed to dangerous voltages in electrical installations.
There is a danger of electric shock if a live part is touched.
Attention! Observe ESD measures!
Electrostatic discharge may destroy electronic components.
Attention! Hot surfaces
Keep clear of surfaces. They may be hot.

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 6 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
1.2.3 Information pictograms indicate the following:
Important information about the product or the relevant section of the document requiring the particular attention of the reader is marked as
followed:
Indicates important and instructional information.
1.3 Copyright note
This documentation is the intellectual property of Syslogic Datentechnik AG, which also has the exclusive copyright. Any modification of the
content, duplication or reprinting of this documentation, as well as any distribution to third parties can only be made with the express permission
of Syslogic Datentechnik AG.
Syslogic Datentechnik AG does not accept any liability for damages arising from the use of any incorrect or incomplete information contained in
this documentation or any information missing.
All brand and product names are trademarks or registered trademarks of the owner concerned.
1.4 Contents of this Documentation
This document addresses to system integrators, programmers and instructed installation and maintenance personal working with the C-Series
Touch-PC system. It provides all information needed to configure setup and program the product.
1.5 Additional Products and Documents
1.5.1 Hardware Products
The following hardware products are mandatory together with this documentation:
PSU/DT24V60W-3A - 24V Desktop Power Supply 60W - 3 pole
or an equivalent CE-compliant AC/DC power supply
1.5.2 Software Products
There are no additional software products except operating systems:
–Operating Systems: check chapter 5.4 for a list of supported implementations.
1.5.3 Documents

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 7 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
1.6 Items delivered
1.1.1. Built-in version
-1x TFT/HB101PU81xxx-C001y
-1x Fixing Frame with M3x6 and M3x8 securing screws
-1x Power supply connector Weidmüller BCZ 3.81/03/180F SN SW (1792960000)
1.1.2. To be purchased separately
-CE-compliant power supply
e.g. PSU/DT24V60W-3A - 24V Desktop Power Supply 60W - 3 pole
1.7 Installation
The installation of the system is described in chapter 3 of this documentation.
1.8 Safety Recommendations and Warnings
The products are intended for measurement, control and communications applications in industrial environments. The products must be
assembled and installed by specially trained people. The strict observation of the assembly and installation guidelines is mandatory.
The use of the products in systems in which the life or health of persons is directly dependent (e.g. life support systems, patient monitoring
systems, etc.) is not allowed.
The use of the products in potentially explosive atmospheres requires additional external protection circuitry which is not provided with the
products.
In case of uncertainty or of believed errors in the documentation please immediately contact the manufacturer (address see chapter 7.1). Do not
use or install the products if you are in doubt. In any case of misuse of the products, the user is solely liable for the consequences.
1.8.1 General warnings
Important note
Ensure that the power supply is disconnected from the device before working on the
device (connecting interfaces, replacing flash cards, batteries, opening the enclosure,
etc.).
Important note
The output voltage of the external power supply shall be SELV and shall be limited
power source according to clause 2.5 EN 60950-1.
Please read the safety instructions of the power supply before installing/connecting
the device.
1.8.2 EMC
Important note
This is a Class A product and not intended to be used in domestic environment. The
product may cause electromagnetic interference. Appropriate measures must be
taken.
Important note
To fullfill class A of EN55032 and EN55035 a CE-compliant AC/DC power supply
must be used. Cable length between power supply and device is limited to 3m.

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 8 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
1.8.3 Electro Static Discharge
Electronic boards are sensitive to Electro-Static Discharge (ESD). Please ensure that
the product is handled with care and only in an ESD protected environment.
Otherwise a proper operation is not guaranteed.
1.8.4 Battery
Changing batteries
Danger of explosion if the battery is not correctly replaced. Replace only with the same
or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Maintenance of battery
Empty batteries may leak.
Never short the battery.
1.8.5 Hot surface
Attention! Hot surfaces
Make sure the device is not hot before mounting or changing the installation. The
device may be hot and may cause burs.
1.9 Life Cycle Information
1.9.1 Transportation and Storage
During transportation and storage, the products must be in their original packing. It is recommended, to keep the original packing in case of
return of the product to the factory for repair. Note that the packing is recyclable.
1.9.2 Assembly and Installation
Observe the EMI-precautions against static discharge. Carefully read the installation documentation before unpacking the product.
The installation procedures must be strictly observed. Note that deviations from the installation guidelines may result in degraded operational
reliability or in unfavourable EM-radiation or EM-susceptibility.
1.9.3 Operation
The operating environment must guarantee the environmental parameters (temperature, power supply, etc.) specified in the technical
specification section of this document.
The main functionality of the product is defined by the application program. The application program is not part of the delivery by Syslogic but
is defined, developed and tested by the customer or a system-integrator for each specific application. Refer to the respective documentation for
more information.
1.9.4 Maintenance and Repair
In the rare case of a product hardware-failure or malfunction, the complete product should be exchanged. The faulty product must be returned
to the factory for repair. Please use whenever possible the original packing for return of the product (EMI and mechanical protection).

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 9 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
1.9.5 Disposal
At the end of the lifespan the C-Series Touch-PC products must be properly disposed. C-Series Touch-PC products contain a multitude of elements
and must be disposed like computer parts. The C-Series Touch-PC products contain batteries which should be properly disposed.
1.9.6 RoHS
The products of the C-Series Touch-PC family are designed and produced according to the Restriction of Hazardous Substances (RoHS) Directive
(2011/65/EU).
1.9.7 WEEE
The products of the C-Series Touch-PC family are not designed ready for operation for the end-user and are not intended for consumer
applications. According to Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) Syslogic takes back defective devices for
proper disposal at the point of sale.

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 10 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2Product Description
2.1 Introduction
2.1.1 Benefits of Syslogic`s Projected capacitive touch panels
The product meets all the requirements of state-of-the-art advanced Panel Computer.
The TFT technology makes a wide range of applications possible with a perfect and clear picture on an absolutely flat surface.
A metal housing with a solid front frame and scratch resistant glass protects the device
A robust touch screen technology is used.
The product is an information display and input device providing a front protection of IP65.
The absolutely flat PCT (Projected capacitive Touch) touch panel offers the latest Multi-Touch technology. PCT Touch Screen can be used with
fingers or with special capacitive touch or thin latex gloves. The touchscreen is self-calibrating.
The device is reliably during long periods of use and requires little care and maintenance.
The product is available for long term.
2.1.2 Intended use of Projected Capacitive Touch Panels
The Projected Capacitive Touch Panel is designed for:
–Visualization and process control
–General control and automation tasks
–Industrial use
–For multi-media systems
–Operation in the ambient conditions specified in the technical data
This device description is designed as a reference guide for the installation, connection, operation and maintenance of all versions of the Projected
Capacitive Panel, and also provides all the relevant technical data.
2.2 Device Variants
The Projected capacitive touch panels are available in the following versions:
Standard temperature
Order code
Flat screen
Mounting type
Memory
CPU
Flash
TFT/HB101PU81G13-C001S
10.1” WXGA
Flush mounting
2GB
Intel x5-E3930 dual core 1.8GHz
64GB
TFT/HB101PU81H18-C001S
10.1” WXGA
Flush mounting
4GB
Intel x5-E3940 quad core 1.8GHz
64GB
TFT/HB101PU81I20-C001S
10.1” WXGA
Flush mounting
8GB
Intel x7-E3950 quad core 2.0GHz
64GB
Tab. 1 Projected capacitive touch panel versions
Extended temperature
Order code
Flat screen
Mounting type
Memory
CPU
Flash
TFT/HB101PU81G13-C001E
10.1” WXGA
Flush mounting
2GB
Intel x5-E3930 dual core 1.8GHz
64GB
TFT/HB101PU81H18-C001E
10.1” WXGA
Flush mounting
4GB
Intel x5-E3940 quad core 1.8GHz
64GB
TFT/HB101PU81I20-C001E
10.1” WXGA
Flush mounting
8GB
Intel x7-E3950 quad core 2.0GHz
64GB

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 11 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2.3 Accessories
The following accessories are not necessarily supplied with the device. These parts could be ordered additionally or downloaded under
www.syslogic.com:
Accessories
Order code
Type designation
Description
TouchDriver
Touch driver software
Built-in touch driver software for Windows / Linux / Android
PSU/DT24V60W-3A
Power supply
24V Desktop Power Supply 60W - 3 pole
Tab. 2 Projected capacitive touch panel accessories
2.4 Features
2.4.1 TFT/HB101PU81xxx-C001y
Fig. 1 TFT/HB101PU81xxx-C001y (Front)
Fig. 2 TFT/HB101PU81xxx-C001y (Back)
USB 3.0
LAN
Power
Supply
Ground
Terminal
X1
Display
Status LEDs
X2
ANT3
ANT2
ANT1

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 12 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2.4.2 Power supply
The processor and its peripherals are powered by a non-isolated, integrated power supply which generates all the necessary voltages.
Device Connection
Weidmueller BCZ 3.81/03/180F SN BK (Ordercode 1792960000)
Power Supply requirements:
•The power supply used must fulfil CE and safety normative according to the application.
•Always use a short circuit protected power supply.
•Do not use power supplies wires or cables longer than 3m.
Pin
Signal
Marking
Remarks
1
NC
2
+24VDC
VDC
3
GND
GND
GND (/shield)
Tab. 3 Power supply connector (1x3 pin)
2.4.3 X1 (only on selected products)
X1 can be selected among RS232, RS422 and RS485.
The serial port is asynchronous communication ports with 16C550A-compatible UARTs.
Configure the serial port in the Super IO submenu of the Advanced menu in the BIOS.
Device Connection
The Serial Port X1 is available on DSUB-9
Pin Number
RS232
RS422 Full Duplex
RS485
1
DCD
TXD+
DATA+
2
RD
TXD-
DATA-
3
TD
RXD+
NC
4
DTR
RXD-
NC
5
GND
GND
GND
6
DSR
NC
NC
7
RTS
NC
NC
8
CTS
NC
NC
9
RI
NC
NC
Tab. 4 Serial Port X1
Important Note
Maximum cable length allowed for X1 connection is 2.8 m. If longer cables are used, special overvoltage
and filtering elements must be installed to comply with the requirements of EMI/RFI CE -certification. Only
use high quality industrial devices with sufficient EMI compatibility.

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 13 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2.4.4 X2 (for future use; only on selected produtcts)
X2 will be used for additional features like CAN or digital I/Os in future products.
Important Note
Maximum cable length allowed for X2 connection is 2.8 m. If longer cables are used, special overvoltage
and filtering elements must be installed to comply with the requirements of EMI/RFI "CE"-certification.
Only use high quality industrial devices with sufficient EMI compatibility.
2.4.5 USB Interface
The C-Series Touch-PC is equipped with two USB 3.0 ports
Device Connection
The USB interface uses a standard A type double USB connector
Important Note
Maximum cable length allowed for USB connection is 3 m. If longer cables are used, special overvoltage
and filtering elements must be installed to comply with the requirements of EMI/RFI CE -certification. Only
use high quality industrial USB devices with sufficient EMI compatibility.
Use shielded cables for maximum EMI protection.
Drawing excessively power might disturb operation.
2.4.6 Ethernet LAN Interface
The C-Series Touch-PC features a Gigabit Ethernet controller having assigned the base address and IRQ at boot time by the BIOS. The Ethernet
interface drives two LED’s (yellow and green) integrated into the RJ45 connector for status information.
The LAN connector features the Intel I210 Ethernet controller supporting 10/100/1000Mb/s.
No configuration options are available for the Ethernet device.
Device Connection
The Ethernet interface uses the standard RJ45 Gigabit connector on the front for 100shielded or unshielded Twisted Pair
cabling.
2.4.7 Display
Beside the integrated touchpanel display an additional monitor can be connected by Mini DP++ (Mini Displayport). Depending on the operating
system the displayed image can be copied or split on the two displays.
Device Connection
The Mini Displayport interface uses the standard Mini DP++ connector
Important Note
Maximum cable length allowed for display connection is 3 m. If longer cables are used, special
overvoltage and filtering elements must be installed to comply with the requirements of EMI/RFI
CE -certification. Only use high quality industrial devices with sufficient EMI compatibility.

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 14 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2.4.8 Frontside Status LEDs
The two colored LEDs on the front side show the following states:
LED
Signal
Remarks
Green up (A)
PWR-LED
When the system’s power is on, this LED will light. When the system
is in the S1 (POS –Power On Suspend) state, it will blink every
second. When the system is in the S3 (STR - Suspend To RAM) state,
it will blink every 4 seconds.
Yellow down (D)
Disk activity
Tab. 5 Frontside Status LEDs
2.4.9 Antennas (only on selected products)
If the device is equipped with a radiotelecommunication device the respective signals are available on standard SMA or SMA-RP connectors,
depending on the radiotelecommunication technology.
Important Note
Maximum cable length allowed for antenna connections is 2.8 m. If longer cables are used, special
overvoltage and filtering elements must be installed to comply with the requirements of EMI/RFI "CE"-
certification. Only use high quality industrial devices with sufficient EMI compatibility.
2.4.10 Internal connectors
SO-DIMM
A memory socket supports up to 8GB 204pin SODIMM DDR3L 1866 MHz
CMOS Battery
The CMOS battery supplies the necessary power required to maintain the CMOS settings and configuration data in the UEFI flash chip. The
specified battery type is CR2032(3V, 230mAh). Because the self-discharge of all lithium batteries increases rapidly at high temperatures the
battery lifetime decreases by a great amount. To prevent battery leakage scheduled service/replacement is recommended. Please contact the
battery manufacturer for further details and calculation assistance for battery lifetime calculation.
Fuse
The main fuse protects the system against destruction in case of high energy distortions on the power line. For replacement, the system must be
opened in an ESD protected environment. Only an entitled instructed person is allowed for this operation. Replacement fuse type is Littelfuse
452004.MRL (4A slow-blow).
USB 2.0
The C-Series Touch-PC offers two USB2.0 ports on Micro-Lock Plus headers from Molex. One port is used to connect the touchpanel to the PC
board.
USB 6 (P5)
USB 7 (P7)
Pin
Signal
Pin
Signal
1
VCC
1
VCC
2
USB6-
2
USB7-
3
USB6+
3
USB7+
4
GND
4
GND
Tab. 6 Pinout internal USB ports

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 15 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
m.2 slot
The PC board offers an m.2 B key type 2242 slot (CN8) for connecting SATA or PCIe x2 SSDs and WWAN devices
Pin
Signal
Pin
Signal
1
CONFIG_3
2
+3.3V
3
GND
4
+3.3V
5
GND
6
Full_Card_power_off
7
USB_D+
8
W_Disable1
9
USB_D-
10
GPIO_9/DAS#/LED_1
11
GND
12
KEY
13
KEY
14
15
16
17
18
19
20
NGFF_I2S_1_CLK
21
CONFIG_0
22
NGFF_I2S_1_RXD
23
GPIO
24
NGFF_I2S_1_TXD
25
DPR
26
NGFF_KEY_B_W_DISABLE
27
GND
28
NGFF_I2S_1_FS_R
29
NC
30
NC
31
NC
32
NC
33
GND
34
NC
35
NC
36
NC
37
NC
38
STAT_DEVSLP
39
GND
40
I2C_SCL
41
SATA_RX+1(PCIe_RX-)
42
I2C_SDA
43
SATA_RX-1 (PCIe_RX+)
44
GPIO12
45
GND
46
NC
47
SATA_TX-1 (PCIe_TX-)
48
NC
49
SATA_TX+1 (PCIe_TX+)
50
PCIE_RST-
51
GND
52
PCIE_CLKREQ
53
REFCLK-
54
PCIE_WAKE
55
REFCLK+
56
NC
57
GND
58
NC
59
NC
60
NC
61
NC
62
NC
63
NC
64
NC
65
NC
66
NC
67
PCIE_RST-
68
SUSCLK
69
+3.3V
70
+3.3V
71
GND
72
+3.3V
73
GND
74
+3.3V
75
+3.3V
Tab. 7 Pinout m.2
Important Note
By default, an m.2 2242 flash memory module is mounted on this port
1
By default SATA signals are selected

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 16 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
mPCIE slot
The PC board offers a mPCIe slot (CN7) for inserting different removable mPCIe cards
Pin
Signal
Pin
Signal
1
WAKE#
2
+3.3V
3
NC
4
GND
5
NC
6
+1.5V
7
PCIE_CLKREQ
8
NC
9
GND
10
NC
11
REFCLK-
12
NC
13
REFCLK+
14
NC
15
GND
16
NC
17
NC
18
GND
19
NC
20
NC
21
GND
22
PCIE_RST-
23
PCIe_RX-2(USB3_TX+)
24
+3.3Vaux
25
PCIe_RX+2(USB3_TX-)
26
GND
27
GND
28
+1.5V
29
GND
30
SMB_CLK
31
PCIe_TX-2(USB3_RX+)
32
SMB_DATA
33
PCIe_TX+2(USB3_RX-)
34
GND
35
GND
36
USB_D-
37
GND
38
USB_D+
39
+3.3V
40
GND
41
+3.3V
42
LED_WWAN
43
GND
44
LED_WLAN
45
NC
46
LED_WPAN
47
NC
48
+1.5V
49
NC
50
GND
51
NC
52
+3.3V
Tab. 8 Pinout mPCIe
2.5 Touch Screen
The devices use an Ilitek Ili2511 chipset.
2.5.1 Basic functions of the touch screen
The touch screen operates using the PCT (Projected Capacitive Touch) technology.
Therefore, the touch must be manipulated using fingers, thin latex or special gloves or pens/styluses that are made for use with capacitive touch
panels.
Depending on the driver version and Operating System the PCT touch supports Multi-touch up to 5 points. Which means you can operate the
touch screen with more than one finger for drawing or selecting.
2.6 Display brightness
Display brightness can be manipulated by using the driver interfaces in the operating system.
For further details on manipulating display brightness refer to the manual of the operating system.
2
By default PCIe signals are selected

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 17 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2.7 Maintenance
To replace the battery, fuse or data storage it is required to open the device.
Shutdown the system and disconnect from power supply and all other connections
Make sure the device has cooled down to room temperature
Only open the device in an ESD protected area
2.7.1 Opening the device
1. Loosen the four screws fixing the housing
Tool: Torx screwdriver T10

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 18 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2. Carefully remove the PC box
3. Detach the cables to the display and touch
2.7.2 Re-assemble the device
To re-assemble the device, follow 2.7.1 in reverse order
2.7.3 Internal overview
Important Note
Be careful not to tear the cables for display and touch
mPCIe
m.2
USB

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 19 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2.7.4 Replace m.2 flash memory
1. Loosen the screw which holds the m.2 module down
Tool: Torx Screwdriver T10
2. Slide the m.2 module out of the connector
3. Slide replacement module into to connector, gently push it down and fix it on the board with the screw
Important Note
Only replace with module with correct pinout according to 2.4.10 on page 15
2.7.5 Mount/replace mPCIe module
1. Loosen the screws which hold the mPCIe module down
Tool: Torx screwdriver T6
2. Slide old module out and mount new or replacing module
3. Gently push the module down and fix it on the board with the screw (M2)
Important Note
Only replace with module with correct pinout according to 2.4.10 on page 16

C-Series Touch-PC: user documentation
DOC/ C-Series_Touch-PC; V1.1
DOC_C-Series_Touch-PC_V1.1.docx Seite 20 von 37
© 2018 Syslogic Datentechnik AG | All rights reserved
2.7.6 Replace CMOS battery
1. Pull battery connector out and gently remove the battery
2. Plug new battery in and fix battery with double-side adhesive on USB connector
Danger of explosion if battery is incorrectly replaced. Replace only with same or
equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
2.7.7 Replace fuse
1. Locate the fuse right behind the power connector
2. Extract with tweezers and replace with same type (Littelfuse 452004.MRL)
2.7.8 Replace SODIMM
1. Loosen the six screws on the back
Tool: Hexagon socket screw driver number 2
2. Remove the cooling plate