syslogic TFT/PB101PU-C Operator's manual

user documentation
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Page 1 of 37
© 2021 Syslogic Datentechnik AG | All rights reserved
TFT/PB101PU-xxxx
Document Ordercode: DOC/PROTOUCH-WIDE_MONITOR
Revision
Date
Author
Modification
0.1
15.04.2019
D. Lagler
Preliminary version
0.2
26.04.2019
D. Lagler
Replaced graphics in chapter 3.2.4
0.3
08.08.2019
D. Lagler
Changed Pinout RS232
1.0
08.06.2021
D. Scheiwiller
Released version

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 2 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
Contents
1Introduction 5
1.1 General Remarks 5
1.2 Explanation of Symbols 5
1.2.1 Danger warnings 5
1.2.2 Warnings indicate the following: 5
1.2.3 Information pictograms indicate the following: 6
1.3 Copyright note 6
1.4 Contents of this Documentation 6
1.5 Additional Products and Documents 6
1.5.1 Hardware Products 6
1.5.2 Software Products 6
1.5.3 Documents 6
1.6 Items delivered 7
1.1.1. Built-in version 7
1.1.2. VESA version 7
1.1.3. To be purchased separately 7
1.7 Installation 7
1.8 Safety Recommendations and Warnings 7
1.8.1 General warnings 7
1.8.2 EMC 7
1.8.3 Electro Static Discharge 8
1.8.4 Battery 8
1.8.5 Hot surface 8
1.9 Life Cycle Information 8
1.9.1 Transportation and Storage 8
1.9.2 Assembly and Installation 8
1.9.3 Operation 8
1.9.4 Maintenance and Repair 9
1.9.5 Disposal 9
1.9.6 RoHS 9
1.9.7 WEEE 9
2Product Description 10
2.1 Introduction 10
2.1.1 Benefits of Syslogic`s Projected capacitive touch panels 10
2.1.2 Intended use of Projected Capacitive Touch Panels 10
2.2 Device Variants 10
2.3 Accessories 11
2.4 Features 11
2.4.1 TFT/PB101PU-N001E 11
2.4.2 Power supply 12
2.4.3 VGA 12
2.4.4 DVI 13
2.4.5 DisplayPort 13
2.4.6 USB Interface 14
2.4.7 Status LED 14
2.4.8 On Screen Display OSD (only on selected products) 14
Menu tree15
2.4.9 X1 (only on selected products) 16

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 3 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
Communication protocol 16
2.4.10 Internal connectors 18
Fuse 18
2.5 Display timings 18
2.6 Touch Screen 18
2.6.1 Basic functions of the touch screen 18
2.7 Maintenance 19
2.7.1 Opening the device 19
TFT/PB101PU 19
TFT/PV101PU 21
2.7.2 Re-assemble the device 21
2.7.3 Replace fuse 21
2.7.4 Cleaning the glass front 22
2.7.5 Cleaning the metal housing 23
2.7.6 Spare parts 23
3Installation Description 24
3.1 Mounting 24
3.1.1 TFT/PB101PU-N001E 24
3.1.2 TFT/PV101PU-N001E 26
3.2 Installation and cabling 27
3.2.1 Introduction 27
3.2.2 Powering the PROTOUCH-WIDE MONITOR System 27
3.2.3 Cabling the interfaces 27
3.2.4 Grounding 28
3.2.5 Cabling of communication links 29
4Technical Data 31
4.1 General Electrical Data 31
4.2 EMI / EMC Specification 32
4.3 Mechanical Data 33
4.3.1 TFT/HB101PU 33
4.4 Use cases Fehler! Textmarke nicht definiert.
5Firmware 34
5.1 Software Structure 34
5.2 Firmware Functions 34
6Product Revision History 35
6.1 Hardware 35
6.2 Firmware 35
6.3 Errata 36
7Manufacturer Information 37
7.1 Contact 37
7.2 Warranty 37
7.3 RMA Service 37

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 4 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
List of Tables
Tab. 1 Projected capacitive touch monitor versions 10
Tab. 2 Projected capacitive touch panel accessories 11
Tab. 3 Power supply connector (1x3 pin) 12
Tab. 4 Status LEDs 14
Tab. 5 OSD key description 14
Tab. 6 Serial Port X1 16
Tab. 7 RS232 communication protocol 17
Tab. 8 TFT/HB101PU81xxx-C001S Mounting dimensions 24
Tab. 14 PV101PU-xxxx VESA dimensions 26
Tab. 9 General Absolute Maximum Ratings 31
Tab. 10 General Recommended Operating Conditions 31
Tab. 11 Maximum cable length 31
Tab. 12 General Electrical Characteristics 32
Tab. 13 General Switching Characteristics 32
Tab. 14 Hardware Revision State 35
Tab. 15 Firmware Revision State 35
List of Figures
Fig. 1 TFT/PB101PU-N001E (Front) 11
Fig. 2 TFT/PB101PU-N001E (Back) 11
Fig. 3 OSD menu tree 15
Fig. 6 Remove rear case of TFT/HVxxxPU8yyy-zZZZ devices 21
Fig. 4 Required Cut out PBxxxPU8 24
Fig. 5 Screws to hold the mounting Frame 25
Fig. 6 Fully installed PROTOUCH-WIDE MONITOR 25
Fig. 7 Additional grounding of the cable shields at the entry point of a cabinet 28
Fig. 8 Isolated communication link 29
Fig. 9 Non-isolated communication link with common chassis potential 30
Fig. 10 TFT/HB101PU mechanical dimensions 33
Related Documents

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 5 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
1Introduction
1.1 General Remarks
The content and presentation of this document has been carefully checked. No responsibility is accepted for any errors or omissions in the
documentation.
Note that the documentation for the products is constantly revised and improved. The right to change this documentation at any time without
notice is therefore reserved.
Syslogic is grateful for any help referring to errors or for suggestions for improvements.
The following registered trademarks are used:
IBM-PC, PC/AT, PS/2 trademarks of IBM Corporation
SPI trademark of Motorola
I2C trademark of Philips Corporation
Intel Atom trademark of Intel Corporation
Windows Embedded Compact trademark of Microsoft Corporation
Windows Embedded Standard trademark of Microsoft Corporation
All other trademarks appearing in this document are the property of their respective company.
1.2 Explanation of Symbols
1.2.1 Danger warnings
The following information is for your personal safety and the prevention of damage to the product described or connected devices.
Safety instructions and warnings for the prevention of danger to the life and health of users or service personnel and for the prevention of
damage are highlighted in this document by the pictograms specified below. Warning and Information pictograms are shown in this document.
1.2.2 Warnings indicate the following:
Death, serious injury or substantial material damage may occur if the related safety measures are not implemented.
The individual Warning pictograms have the following meaning:
Attention! General!
Is an instruction that must be observed in order to ensure protection before, while
and after using the device. The correct procedure must be observed.
Attention! Electric shock!
Persons may be exposed to dangerous voltages in electrical installations.
There is a danger of electric shock if a live part is touched.
Attention! Observe ESD measures!
Electrostatic discharge may destroy electronic components.
Attention! Hot surfaces
Keep clear of surfaces. They may be hot.

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 6 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
1.2.3 Information pictograms indicate the following:
Important information about the product or the relevant section of the document requiring the particular attention of the reader is marked as
followed:
Indicates important and instructional information.
1.3 Copyright note
This documentation is the intellectual property of Syslogic Datentechnik AG, which also has the exclusive copyright. Any modification of the
content, duplication or reprinting of this documentation, as well as any distribution to third parties can only be made with the express permission
of Syslogic Datentechnik AG.
Syslogic Datentechnik AG does not accept any liability for damages arising from the use of any incorrect or incomplete information contained in
this documentation or any information missing.
All brand and product names are trademarks or registered trademarks of the owner concerned.
1.4 Contents of this Documentation
This document addresses to system integrators, programmers and instructed installation and maintenance personal working with the
PROTOUCH-WIDE MONITOR system. It provides all information needed to configure setup and program the product.
1.5 Additional Products and Documents
1.5.1 Hardware Products
The following hardware products are mandatory together with this documentation:
PSU/DT24V60W-3A - 24V Desktop Power Supply 60W - 3 pole
or an equivalent CE-compliant AC/DC power supply
1.5.2 Software Products
1.5.3 Documents

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 7 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
1.6 Items delivered
1.1.1. Built-in version
-1x TFT/PB101PU-xxxx
-1x Fixing Frame with M3x6 and M3x8 securing screws
-1x Power supply connector Weidmüller BCZ 3.81/03/180F SN SW (1792960000)
1.1.2. VESA version
-1x TFT/PV101PU-xxxx
-1x Power supply connector Weidmüller BCZ 3.81/03/180F SN SW (1792960000)
-1x 4x M4x8 securing screws for VESA100 mounting
1.1.3. To be purchased separately
-CE-compliant power supply
e.g. PSU/DT24V60W-3A - 24V Desktop Power Supply 60W - 3 pole
1.7 Installation
The installation of the system is described in chapter 3 of this documentation.
1.8 Safety Recommendations and Warnings
The products are intended for measurement, control and communications applications in industrial environments. The products must be
assembled and installed by specially trained people. The strict observation of the assembly and installation guidelines is mandatory.
The use of the products in systems in which the life or health of persons is directly dependent (e.g. life support systems, patient monitoring
systems, etc.) is not allowed.
The use of the products in potentially explosive atmospheres requires additional external protection circuitry which is not provided with the
products.
In case of uncertainty or of believed errors in the documentation please immediately contact the manufacturer (address see chapter 7.1). Do not
use or install the products if you are in doubt. In any case of misuse of the products, the user is solely liable for the consequences.
1.8.1 General warnings
Important note
Ensure that the power supply is disconnected from the device before working on the
device (connecting interfaces, replacing flash cards, batteries, opening the enclosure,
etc.).
Important note
The output voltage of the external power supply shall be SELV and shall be limited
power source according to clause 2.5 EN 60950-1.
Please read the safety instructions of the power supply before installing/connecting
the device.
1.8.2 EMC
Important note
This is a Class A product and not intended to be used in domestic environment. The
product may cause electromagnetic interference. Appropriate measures must be
taken.

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 8 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
Important note
To fullfill class A of EN55032 and EN55024 a CE-compliant AC/DC power supply
must be used. Cable length between power supply and device is limited to 3m.
1.8.3 Electro Static Discharge
Electronic boards are sensitive to Electro-Static Discharge (ESD). Please ensure that
the product is handled with care and only in an ESD protected environment.
Otherwise a proper operation is not guaranteed.
1.8.4 Battery
Changing batteries
Danger of explosion if the battery is not correctly replaced. Replace only with the same
or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Maintenance of battery
Empty batteries may leak.
Never short the battery.
1.8.5 Hot surface
Attention! Hot surfaces
Make sure the device is not hot before mounting or changing the installation. The
device may be hot and may cause burs.
1.9 Life Cycle Information
1.9.1 Transportation and Storage
During transportation and storage, the products must be in their original packing. It is recommended, to keep the original packing in case of
return of the product to the factory for repair. Note that the packing is recyclable.
1.9.2 Assembly and Installation
Observe the EMI-precautions against static discharge. Carefully read the installation documentation before unpacking the product.
The installation procedures must be strictly observed. Note that deviations from the installation guidelines may result in degraded operational
reliability or in unfavourable EM-radiation or EM-susceptibility.
1.9.3 Operation
The operating environment must guarantee the environmental parameters (temperature, power supply, etc.) specified in the technical
specification section of this document.
The main functionality of the product is defined by the application program. The application program is not part of the delivery by Syslogic but
is defined, developed and tested by the customer or a system-integrator for each specific application. Refer to the respective documentation for
more information.

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 9 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
1.9.4 Maintenance and Repair
In the rare case of a product hardware-failure or malfunction, the complete product should be exchanged. The faulty product must be returned
to the factory for repair. Please use whenever possible the original packing for return of the product (EMI and mechanical protection).
1.9.5 Disposal
At the end of the lifespan the PROTOUCH-WIDE MONITOR products must be properly disposed. PROTOUCH-WIDE MONITOR products contain
a multitude of elements and must be disposed like computer parts. The PROTOUCH-WIDE MONITOR products contain batteries which should
be properly disposed.
1.9.6 RoHS
The products of the PROTOUCH-WIDE MONITOR family are designed and produced according to the Restriction of Hazardous Substances
(RoHS) Directive (2011/65/EU).
1.9.7 WEEE
The products of the PROTOUCH-WIDE MONITOR family are not designed ready for operation for the end-user and are not intended for consumer
applications. According to Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) Syslogic takes back defective devices for
proper disposal at the point of sale.

PROTOUCH-WIDE MONITOR: user documentation
DOC/PROTOUCH-WIDE_MONITOR; V1.0
DOC_PROTOUCH-WIDE_MONITOR_V1.0.docx Seite 10 von 37
© 2019 Syslogic Datentechnik AG | All rights reserved
2Product Description
2.1 Introduction
2.1.1 Benefits of Syslogic`s Projected capacitive touch panels
The product meets all the requirements of state-of-the-art advanced touch monitor
The TFT technology makes a wide range of applications possible with a perfect and clear picture on an absolutely flat surface.
A metal housing with a solid front frame and scratch resistant glass protects the device
A robust touch screen technology is used.
The product is an information display and input device providing a front protection of IP65.
The absolutely flat PCT (Projected capacitive Touch) touch panel offers the latest Multi-Touch technology. PCT Touch Screen can be used with
fingers or with special capacitive touch or thin latex gloves. The touchscreen is self-calibrating.
The device is reliably during long periods of use and requires little care and maintenance.
The product is available for long term.
2.1.2 Intended use of Projected Capacitive Touch Panels
The Projected Capacitive Touch Panel is designed for:
–Visualization and process control
–General control and automation tasks
–Industrial use
–For multi-media systems
–Operation in the ambient conditions specified in the technical data
This device description is designed as a reference guide for the installation, connection, operation and maintenance of all versions of the Projected
Capacitive Panel, and also provides all the relevant technical data.
2.2 Device Variants
The Projected capacitive touch monitors are available in the following versions:
Order code
Flat screen
Mounting type
Connections
TFT/PB101PU-N001E
10.1” WXGA
Flush mounting
Displayport, DVI, VGA, USB
TFT/PV101PU-N001E
10.1” WXGA
VESA mounting
Displayport, DVI, VGA, USB
Tab. 1 Projected capacitive touch monitor versions