Takstar SGC-598 User manual

单体:背极式驻极体
指向性:心型
频率响应:50Hz-16kHz
灵敏度：-32dB±3dB(0dB=1V/Pa at 1kHz)
灵敏度增强：+10dB
低频衰减：60Hz 10dB/倍频
输出阻抗：2000Ω±30%
使用电压：1.5V AA电池
欢迎使用TAKSTAR电容麦克风，本产品专为摄影、采访等场合
设计的，能通配大部分品牌的摄像机、单反相机，简便的安装固定
在相机上，操作方便，是您理想的选择。在使用之前，请仔细阅读
本说明书，以便能正确的操作，发挥本麦克风的性能。
专为摄像机而设计的高灵敏度电容麦克风，提升录音质量
心型单指向拾音特性，能有效降低周围的环境噪音被拾取
提供+10dB灵敏度增强以及200Hz低频衰减功能；满足不同场
合使用
采用标准的通用连接器规格，能简便的安装固定在摄像机上
防震结构设计，降低摄像机的机械噪声和其它的振动噪声干扰
集音管选用合金材料设计，坚固牢靠，并能有效屏蔽电磁干扰
采用1.5V AA碱性电池供电，电池使用时间可达100小时
具有低电指示功能，让用户充分做好更换电池的准备
产品特性
技术参数
-2 0
-3 0
-4 0
-5 0
-6 0
-7 0 20 50 10 0 20 0 50 0 1 k 2k 5k 1 0k 20 k
Mi cr oph on e Fr eq ue nc y Re sp ons e dB R ef . 1V /P a
频率响应曲线
功能操作按键
3
2
1
5
6
7
4
1
电源开关：开关推向 "ON" 打开电源，反之关闭电源
灵敏度增强开关：可增强麦克风的拾音音量
低频衰减开关：打开可减少外界噪声被拾取
电源指示灯: 打开电源开关, 此灯亮绿色; 当低电量时此灯转亮红色
防风棉
3
2
4
1. 打开电池仓，请按照电池仓内标示的正负极正确安装电池。
2. 向右旋转摄像机卡片螺母，把麦克风卡入摄像机卡座，向左旋转
螺母即可固定。此防震架上还设有距离调节功能，您可根据实际
情况调节麦克风的前后位置。
3.将连接线Φ3.5插头插入摄像机的麦克风输入孔内，打开麦克风的
电源开关，此时麦克风进入工作状态。
4. 此麦克风能满足在不同场合使用，提供+10dB以及200Hz低频
衰减功能。
使用说明
电池仓
摄像机卡片螺母
防震架：能降低摄像机的机械噪声及其它的震动噪声干扰
5
6
7
注意事项
标准配置
防风棉一个
麦克风组件一套
电池一节
说明书一份
布袋子一个
1. 电容麦克风灵敏度高，必须注意不要从高处落下或给予强烈
冲击。
2. 电容麦克风不使用时应存放在干燥清洁的地方，避免在温度、
湿度过高或及强磁场的场所保管或使用，以免影响灵敏度和
音色。
3. 电容麦克风停止使用时，请将开关推到"OFF"处，以节省电池
电量。
4. 若长时间不使用时，请取出电池，避免电池产生漏液而导致电路
损坏。
* 本产品相关规格及配置如有变更，恕不另行通知。
* 如需服务和配件方面的信息，请联系当地经销商或请访问得胜
网站www.takstar.com.
广东得胜电子有限公司
地址:广东省惠州市博罗县龙溪镇富康一路2号
电话:400 6828 333 传真: + 8 6 7 5 2 6 3 8 3 9 5 0 网 址: w w w . t a k s t a r . c o m
SGC-598 电容麦克风
12 5H z
50 0H z
10 00 Hz
20 00 Hz
40 00 Hz
80 00 Hz
180°
150°
120°
90°
60°
30°
0°
210°
270°
240°
300°
330°
Cardioid
8
8

-2 0
-3 0
-4 0
-5 0
-6 0
-7 0 20 50 10 0 20 0 50 0 1 k 2k 5k 1 0k 20 k
Mi cr oph on e Fr eq ue nc y Re sp ons e dB R ef . 1V /P a
1
3
2
4
5
6
7
12 5H z
50 0H z
10 00 Hz
20 00 Hz
40 00 Hz
80 00 Hz
180°
150°
120°
90°
60°
30°
0°
210°
270°
240°
300°
330°
Cardioid
3
2
1
5
6
7
4
8
8
SGC-598 Condenser Microphones
Welcome to use Takstar condenser microphones. SGC-598 is specially
designed for camera, interviews and other applications. It matches with a
majority brand of vedio camera, SLR camera and be simply fixed on the
camera. Please read this manual detailedly before using to make sure the
correct operation and exert the optimum function.
High sensitivity condenser microphone specially designed for camera
Cardioid directivity characteristic can effectively reduce the ambient noise
Optional +10dB sensitivity tone up and 200Hz bass filter meet the demand
of different applications
Standard connector size for easy connection with camera
Shock proof design can reduce the mechanical noise of cameras and other
vibration noise
Rugged alu mic housing features effective EMI resistance
Powered by 1.5V AA alkaline battery, playtime is up to 100hrs
Low power indicator
Features
Transducer Principle: Back Electret Condenser
Directivity Characteristic: Cardioid
Frequency Response: 50Hz-16kHz
Sensitivity: -32dB±3dB(0dB=1V/Pa at 1kHz)
Sensitivity Tone Up: +10dB
Bass Filter: 10dB/octave at 60Hz
Output Impedance: 2000Ω±30%
Power Requirement: 1.5V AA battery
Specification
Function Illustration
Frequency Response Graph
Power switch: Push to “ON” for turning on the microphones and
conversely for turning off
Sensitivity tone up switch: Tone up the volume of microphone
Bass filter switch: Turn it on can reduce the ambient noise
Power indicator: Turn on the power switch, the indicator is green; when it
is at low power, the indicator is red
Windscreen
Battery compartment
Camera clip nut
Shock mount: Reduce the mechanical noise of cameras and other
vibration noise
1. Open the battery compartment and correctly install the battery according
to the marks of positive and negative polars.
2. Turn the camera clip nut right, then clip the microphone in the camera
socket and turn left to fix them. The shock mount is with distance
adjustable function, you can adjust microphone’s position depending on
actual situation.
3. Insert Φ3.5mm plug of connecting cable into mic input socket of camera,
the microphone will work when you turn it on.
4. Microphone meet the demand of different applications and provide
optional +10dB sensitivity tone up and 200Hz bass filter.
Operation Instruction
Related specifications and configuration are subject to change without
notice.
If you need the information of service or accessories, please contact the
local dealer.
Caution
1. The sensitivity of condenser microphone is too high to fall from high place
or given strong shock.
2. When the condenser microphone is not used, please store it in dry and
clean place. To avoid the effect of sensitivity and timbre, please don’t
store or use it in the place with high temperature/humidity and strong
magnetic field.
3. When you stop using condenser microphone, please turn the power
switch off to save battery power.
4. When long time no use, please take out the battery to avoid battery liquid
leakage which will cause circuit damage.
Standard Configuration
Windscreen: 1pc
Microphone components: 1set
Battery: 1pc
User manual: 1pc
Cloth bag: 1pc
*
*
Guangdong Takstar Electronic Co.,Ltd.
Address: No.2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: [phone] Fax: [phone] Email: [e-mail] Website: www.takstar.com