Takstar TA-55D User manual

TAKSTAR TA-55D专业动圈麦克风，
是一款专为舞台演出，卡拉OK场所而设计
的。其优雅的古典外形与现代声学理念相结
合，良好的峰值瞬态响应，使复制的声源更
具现场感。
TA-55D 采用频响宽广的动圈音头，具
备高品质音色；单指向性拾音能有效的增强
主声源、抑制背景噪音，让您的演绎更出色。
在使用之前，请仔细阅读本说明书，以
便能正确的操作，发挥本产品的理想性能。
专业动圈式麦克风
产品特性
技术参数
频率响应曲线图
- - 优质的动圈音头，频率响应宽广，具备高品质音色
- - 单指向性拾音，能有效的增强主声源、抑制背景噪音
- - 亮丽的镀镍外观，抗氧化能力强
- - 麦克风设计了气流过滤功能，能消除演唱时出现的气息噪声
- - 磁簧式静音开关设计，没有任何的开关噪音
连接线的安装与拆卸
使用说明书
安装示意图
1. 把卡侬(XLR)插头的扣键与麦克风上的卡槽口对准，然后将XLR插
入麦克风，直至扣键卡住麦克风卡槽口。
2. 麦克风与连接线分开时，可握住插头,同时按压扣键，然后将插头从
麦克风拉出。
1. 用手罩住麦克风头部，或使麦克风接近扩音器，可能产生啸叫声，
遇此情形时，首先降低音量，拉开同扩音器的距离，尽量使麦克风
不同扩音器相对。
2. 麦克风灵敏度高，必须注意不要从高处掉下，撞击或给予强烈冲击。
3. 麦克风应安装在干燥清洁的地方，避免在温度、湿度过高的场所保
管或使用，以免影响灵敏度和音色。
※本产品相关规格如有变更恕不另行通知。
※如需服务和配件方面的信息，请就近和得胜代理商联系，或请访问得
胜网站www.takstar.com
单体: 动圈式
指向性: 超心型
频率响应: 60Hz~16kHz
灵敏度: -52dB±3dB (0dB=1V/Pa at 1kHz)
输出阻抗: 600Ω±30% (at 1kHz)
单体重量：655g
广东省电声工程技术研究中心
广东得胜电子有限公司制造
地址：广东省惠州市博罗县龙溪镇富康一路2号 电话: [phone] 传真: [phone]
邮编：516121 邮箱：[e-mail] 网址：www.takstar.com

TAKSTAR TA-55D professional dynamic
microphone is specially designed for stage
performance and Karaoke application. Its
classic design combined with modern acoustic
theory and the excellent peak transient
response make the sound reproduction more
lifelike. TA-55D adopts high-quality wide
frequency response range dynamic capsule,
the cardioid directivity characteristic can
effectively enhance the main acoustic source
and eliminates the background noise which
makes your performance outstanding and
perfect.
Please read this user manual detailedly before
using to make sure the correct operation and
exert the best performance.
Features
• High quality dynamic capsule features wide frequency response
range and clear sound reproduction
• Uni-directional characteristic ensures maximum gain and
eliminates background noise
• Nice nickel-plated finish for high oxidation resistance
• Effective, built-in wind and breath noise filter design
• On/off magnetic-reed switch for eliminating switching noise
Specification
Element: Dynamic
Directivity Characteristic: Hyper-cardioid
Frequency Response: 60Hz-16kHz
Sensitivity: -52dB ± 3dB(0dB=1V/Pa at 1kHz)
Output Impedance: 600Ω ± 30%(at 1kHz)
Net Weight: 655g
Frequency Response Curve
Cautions
1. If the head of the microphone is covered by hand or brought close
to the speaker, a howling sound may be generated. To prevent this,
first decrease the volume, then place the microphone so that it is
not pointed to the speaker and that there is a sufficient distance
between the microphone and speaker.
2. The sensitivity of the cartridge is high, do not drop it from high or
apply strong shock to it.
3. To maintain the sensitivity and quality of sound reproducing,
avoid exposing it to moisture and extreme temperatures.
Connecting and disconnecting the microphone
cable
1. Insert the XLR connector into the microphone. If necessary,
rotate the connector to align the key on the connector and
the groove in the microphone. Push the connector into the
microphone until it clicks.
2. To disconnect the cable and microphone, grasp the
connector while depressing the tab. Pull the connector
away from the microphone.
Installation Illustration
* Specifications are subject to change without prior notice
* For service requirement or accessory information, please contact TAKSTAR
local authorized agent
Professional Dynamic Microphone
Address: No. 2 Fu Kang Yi Rd., Longxi, Boluo, Huizhou, Guangdong, 516121, China
Tel: [phone] Fax: [phone]
E-mail: Website: [e-mail]
GUANGDONG TAKSTAR ELECTRONIC CO., LTD.