Takstar TA-68 User manual

专业动圈麦克风
PROFESSIONAL DYNAMIC MICROPHONE

01
前言
尊敬的用户：
感谢您选购得胜TA-68专业动圈麦克风，为了您能够更好的了解使用本产品，
建议您在使用前仔细阅读本说明书。
若存在有疑问或者您有宝贵的建议，可通过拨打得胜
官方服务热线400 6828 333或微信扫描二维码关注得胜官
方公众号与我们联系。
适用范围
◆ 现场演出、主持配音、直播录音等
产品特性
标准配置
◆ 麦克风 一支 ◆ 麦克风夹子 一个 ◆ 麦克风线 一条
◆ 防风棉 一个 ◆ 说明书 一份 ◆ 皮袋 一个
专业动圈麦克风
◆ 一款专业手持动圈麦克风，适用于现场演出、主持配音、直播录音等；
◆ 采用专业级动圈音头，较高的解析度及瞬态响应，再现清晰饱满的声音细节；
◆ 心型指向拾音设计，有效抑制噪音和反馈，降低背景噪音；
◆ 悬架减震系统，可较大程度地降低手持噪音和振动声的传递；
◆ 全金属结构，坚固耐用，质感加倍，提升触感和握感；
◆ 配置高档手提航空箱，方便用户携带和存放。

-80
-100
03
02
音头：动圈式
指向性：心型指向
频率响应：50Hz-16KHz
灵敏度：-55dB±3dB（0dB=1V/ubar at 1kHz）
输出阻抗：450Ω±30%（at 1KHz）
单体重量：约430g
注：以上数据由得胜实验室测试得到，并拥有最终解释权！
功能示意
XLR接口：通过XLR音频线与声卡、调音台等音频设备连接。
针脚1（接地） 针脚2（正）
针脚3（负）
使用说明
1.麦克风与线材连接时，将线材的卡侬头对准麦克风尾部的三针插入，直至
扣键定位。
2.将麦克风线材的另一端与调音台、功放、声卡等音频设备连接即可使用。
专业动圈麦克风专业动圈麦克风
(at 1kHz)
Uni-directional
0°
30°
60°
90°
120°
150°
330°
300°
270°
240°
210°
180°
-50
-60
-70

3.麦克风可手持，也可以安装到支架上使用。安装支架使用时，先将配套的麦
克风夹子安装到带有3/8”或5/8”标准螺纹接口的麦克风支架上，再将麦克风
安装到夹子上，如图所示：
4.建议使用时，应先将音频设备（声卡、调音台等）音量调小，再将音量从小
到大慢慢调节至合适，以免声压过大对扬声器造成冲击；尽可能地拉开麦克风
与扬声器的距离，避免麦克风和扬声器相对，以免影响麦克风音质及有效控制
回馈啸叫。
5.使用时，请对准麦克风网头顶部方向，人与麦克风建议保持5-10厘米的拾音
距离。
5-10cm
6.麦克风与连接线分离时，可握住插头并按压卡侬扣键，将线材拔出即可。
安全警示
为避免电击、高温、着火、辐射、爆炸、机械危险以及使用不当等可能造
成的人身伤害或财产损失，使用本产品前，请仔细阅读并遵守以下事项：
1.使用产品时请确认所连设备与本产品是否匹配以及合理调整音量大小，不要
在超过产品功率及大音量下长时间使用，以免造成产品异常；
2.使用中若发现有异常（如冒烟、异味等），请立即关闭电源开关并拔掉电源
插头，然后将产品送售后服务网点检修；
3.本产品及附件都应放置在室内干燥通风处，请勿长期存放在潮湿、灰尘多的
环境，使用中避免靠近火源、雨淋、进水、过度碰撞、抛掷、振动本机及覆盖
通风孔，以免损坏其功能；
4.若产品需要固定于墙壁或天花板上时，请确保固定到位，防止因固定强度不
足导致产品发生跌落危险；
5.使用该产品时需遵守相关安全规定，法律法规明确禁止使用场合请勿使用本
产品，以免导致意外事故；
6.请不要自行拆机改装或维修，以防止出现人身伤害，如有问题或服务需求请
联系当地售后服务网点跟进处理。
专业动圈麦克风专业动圈麦克风
05
04

关于图标含义解释
根据RL2004/108/EG和European Low Voltage Directive（欧洲
低电压指令）RL2006/95/EG的测试结果表明，本产品符合欧共体关
于电磁兼容性的成员国法律整合的指令中所规定的限值。
未经合规方明确批准的变更或修改可能会使用户失去操作设备
的权限。此设备符合FCC规则第15条部分的要求。操作须符合以下
两个条件：（1） 此设备可能不会造成有害干扰；（2）此设备必须
接受接收到的任何干扰，包括可能导致意外操作的干扰。
本说明书中内容符合截止印刷之日的技术规格。由于得胜公司会不断改进
产品， 本说明书可能不符合您的特定产品的技术规格。要获取最新版说明书，
请访问得胜官网，然后下载说明书文件。技术规格、设备或另售的附件在各个
地区可能有所不同，如有问题请与当地得胜销售网点确认。如需更多支持和深
层产品信息，请浏览得胜官方网站：https://www.takstar.com
环保说明
专业动圈麦克风专业动圈麦克风
07
06
此符号表示，根据WEEE指令(2012/19/EU)和国家法律，由于这
种类型的废弃物会有潜在的有害物质，可能对环境和人类健康产生负
面影响，所以本产品不应与您的家庭垃圾一起处置，应将本产品应交
由授权的电气和电子设备（WEEE）回收站回收。同时，您在正确处
理本产品的同时将有助于自然资源的有效利用。如需了解更多有关您
可以在何处放置废物回收设备的信息，请联系您当地的城市办事处、
废物管理局或家庭废物处理服务部门。
关于本说明书

Preface
Dear Customer,
Thank you for purchasing Takstar TA-68 Professional Dynamic Microphone.
In order to better understand and use the product, please read this manual
carefully. If you have any questions or suggestions, please contact our local
dealer.
Applications
◆ Presentation, dubbing, livestream recording and live performance
Features
Package Contents
◆ Microphone 1 pc ◆ Microphone Clamp ◆ XLR Cable 1 pc 1 pc
◆ Windscreen 1 pc 1 pc ◆ User Manual 1 pc ◆ Pleather Pouch
◆ Handheld dynamic mic for presentation, dubbing, livestream recording
and live performance
◆ Pro dynamic capsule with excellent clarity and transient response
◆ Cardioid pickup pattern greatly reduces surrounding noise and feedback
◆ Suspension damping system to minimize handling noise and vibration
◆ Sturdy full-metal structure, upgraded texture and feel
◆ Comes with a classy flight case for easy storing and carrying
Capsule: dynamic
Polar Pattern: cardioid
Frequency Response: 50Hz-16KHz
Sensitivity: -55dB±3dB (0dB=1V/ubar at 1kHz)
Output Impedance: 450Ω±30% (at 1KHz）
Net Weight: approx. 430g
Note: The above data are measured by Takstar laboratory, and Takstar has the final
interpretation right!
Specifications
frequency response curve
Professional Dynamic MicrophoneProfessional Dynamic Microphone
09
08
-80
-100
(at 1kHz)
Uni-directional
0°
30°
60°
90°
120°
150°
330°
300°
270°
240°
210°
180°
-50
-60
-70

Function Descriptions
XLR Port: used to connect to audio device such as audio interface and
mixer via XLR cable.
Operation Instructions
1. To connect the mic with XLR cable, align the XLR connector with the 3-pin
connector on mic, then insert fully until the XLR lock button locks in place.
2. Connect the other end of the XLR cable with audio device, e.g., mixer,
power amplifier, audio interface.
1 2
3
pin1 (ground) pin2 (+)
pin3 (-)
Audio Interface - Rear
Audio Interface - Front
Male/Female XLR
Audio Cable
PC
USB Data Cable
3. Hold the mic by hand, or install it on a stand. For stand installation, first
fix the mic clamp onto the 3/8'' or 5/8'' standard-threaded connector on
the stand, then secure the mic onto the clamp as shown below:
4. Please turn the volume to the minimum on the audio device (e.g., audio
interface, mixer) before switching on the phantom power. Then gradually
increase the volume to an appropriate level. This helps to prevent the
speakers from being damaged by high sound pressure. Keep a proper
distance between the mic and the speakers to avoid feedback howling and
ensure audio quality.
5. Please speak towards the top of the mic grille while recording,
recommended at 5-10cm speak distance.
5-10cm
6. To disconnect the mic from XLR cable, press down the XLR lock button
and unplug the cable.
Professional Dynamic MicrophoneProfessional Dynamic Microphone
11
10

Safety Instructions
To avoid electric shock, overheat, fire, radiation, explosion, mechanical
risk and injury or property loss due to improper use, please read and
observe the following items before use:
1. Please check if the power of the connected equipment matches with that
of this product before operation. Adjust the volume to proper level during
operation. Do not operate at over-power or high-volume level for extended
time to avoid product malfunction.
2. If there is any abnormality during use (e.g., smoke, strange odor), please
kill the power switch and unplug from power source, then send the
product to the local after-sales service outlet for repair.
3. Keep this product and its accessories in a dry and ventilated area. Do not
store in a humid or dusty area for extended time. Keep away from fire, rain,
liquid intrusion, bumping, throwing, vibrating, or from blocking any
ventilation openings, to prevent malfunction.
4. The product must, when installed on walls or ceilings, be fixed firmly in
place at adequate strength to prevent from falling.
5. Please abide by safety rules during operation. Do not use the product in
places prohibited by laws or regulations to avoid accident.
6. Do not disassemble or repair the product by yourself to avoid injury. If you
have any questions or require any services, please contact our local
after-sales service outlet.
Label Meanings
This device is compliant with the limits of the European Council
Directive on the approximation of the laws of the member states
relating to electromagnetic compatibility according to RL2004/108/EG and
European Low Voltage Directive RL2006/95/EG.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the complying party
may cause the user to lose permission to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
Professional Dynamic MicrophoneProfessional Dynamic Microphone
13
12

1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operation.
About This Manual
This manual contains up-to-date technical specifications as of printing.
However, specifications contained herein may not conform to your
particular product since Takstar is constantly improving its products. Also,
specifications, devices or accessories available may vary from region to
region. If you have any questions, please contact our local sales outlet. For
the latest version/more information, please visit our website:
https://www.takstar.com/
Professional Dynamic Microphone
14
This symbol indicates that this product should not be disposed of
with your household waste, according to the WEEE directive
(2012/19/EU) and your national law. This product should be
handed over to an authorized collection site for recycling waste electrical
and electronic equipment (WEEE). Improper handling of this type of waste
could have a possible negative impact on the environment and human
health due to potentially hazardous substances that are generally
associated with WEEE. At the same time, your cooperation in the correct
disposal of this product will contribute to the effective usage of natural
resources. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, waste
authority, or your household waste disposal service.