Targus Stow-N-Go Notebook Mouse User manual

USER GUIDE
MANUEL DE
L'UTILISATEUR
Wireless
Stow-N-GoTM
Calculator Keypad
Pavé Numérique
sans fil avec
Calculatrice
Stow-N-GoMC

Table of Contents
English ................................................. 2
Français ............................................... 20

TARGUS WIRELESS
STOW-N-GOTM
CALCULATOR KEYPAD
Introduction
Congratulations on your purchase of the Targus Wireless
Stow-N-Go Calculator Keypad. This wireless calculator/
keypad combines special Tax, Euro and Currency rate
calculating functions. The keypad is designed with a
built-in cavity to store the USB receiver, eliminating the
potential misplacement of the receiver and to provide
ease of traveling with the keypad.
Contents
In addition to this user guide, this package contains:
• Targus Wireless Stow-N-Go Calculator Keypad
•USB Receiver
•1 AA battery
System Requirements
Hardware
• PC with an Intel®Pentium®processor or equivalent
• USB 1.1 or 2.0 interface

Targus Wireless Stow-N-Go Calculator Keypad
Operating System
• Windows® 2000
• Windows®XP
• Windows Vista®
Installing the Batteries
Receiver
Battery
Cover
Calculator/Keypad - back view
1 Remove the battery cover from the back of the keypad.
2 Insert the supplied batteries, making sure that the
positive (+) and negative (-) ends of each battery match
the polarity indicators inside the battery housing.
WARNINGS: WHEN REPLACING THE BATTERIES, YOU MAY USE ALKALINE OR
OTHER HEAVY-DUTY NIMH BATTERIES. NEVER COMBINE AN ALKALINE WITH A
NIMH BATTERY IN A DEVICE.
AVOID MIXING NEW AND USED BATTERIES IN A DEVICE.
3 Slide the battery cover back into position until it “clicks”
firmly into place.

Targus Wireless Stow-N-Go Calculator Keypad
Connecting the Receiver and
Installing the Default Drivers
To connect the receiver:
1 Remove the receiver from the back of the keypad.
2 Plug the USB receiver into an available USB port on
your computer.
For Windows® 2000/XP/Vista, the“Found New Hardware”
or “Auto-detect of a HID device” message will appear to
indicate the installation of the default driver.
NOTE: YOU MAY NEED TO ESTABLISH A COMMUNICATION LINK BETWEEN THE
KEYPAD AND THE RECEIVER. SEE “ESTABLISHING A COMMUNICATIONS LINK”
.
Turning the Calculator/ Keypad On
and Off
To power on the batteries, use the on/off switch located
on the back of the keypad.
To turn on the keypad, press the CE/AC key, located
directly above the number seven key.
To turn off the keypad in calculator mode, press the CE/
AC key for 2 seconds.
To power off the batteries, use the on/off switch located
on the back of the keypad.

Targus Wireless Stow-N-Go Calculator Keypad
Connection
Button
On/Off Switch
The LED on the receiver will flash for 60 seconds to
indicate ID search mode.
Establishing a Communications
Link
After your computer detects the USB receiver and the
default driver software is installed, you may need to
establish a communications link between the receiver and
the keypad before you can use it.
1 Plug the receiver into your computer’s USB port and turn
on the keypad.
NOTE: MAKE SURE THAT YOUR COMPUTER AND KEYPAD ARE TURNED ON AND
YOUR COMPUTER HAS DETECTED THE USB RECEIVER BEFORE YOU ESTABLISH
A COMMUNICATIONS LINK.

Targus Wireless Stow-N-Go Calculator Keypad
2 During this time, press and release the connection
button on the back of the calculator/keypad.
When a communications link is established, the LED on
the receiver will stop flashing.
You are now ready to use the calculator/keypad.

Targus Wireless Stow-N-Go Calculator Keypad
Using the Calculator/ Keypad
Switching Between Calculator and
Keypad Mode
To switch between the two modes, press the Mode key.
The mode you are in will be displayed on the LCD.
Enter
Enter
Mode key
Battery low
indicator
NumLock key
Calculator/Keypad - front view
To turn off the keypad while in calculator mode, press the
NumLock key for 2 seconds.
NOTES: REPLACE THE BATTERIES WHEN THE BATTERY LOW INDICATOR LED
STARTS FLASHING.
TO POWER OFF, USE THE ON/OFF SWITCH LOCATED ON THE BACK OF THE
KEYPAD.

Targus Wireless Stow-N-Go Calculator Keypad
Calculator Mode Only:
Key Function
M+ Adds the current display to the content of
memory
M- Subtracts the current display from the
content of memory
MRC
Pressing once transfers the memory
contents onto the display. Pressing a second
time clears the memory.
+/- Switches the displayed value between
positive (+) and negative (-)
% Performs percentages
€Setting Euro rate
CUR Currency and exchange rate setting
MODE Switches between calculator and keypad
modes
SEND Send calculation results to your computer
Fn Combination key with Tax- and Tax+ function
Tax- Price-less-tax calculation (Displayed amount
less the tax rate input)
Tax+ Price-plus-tax calculation.

Targus Wireless Stow-N-Go Calculator Keypad
NOTE: THE NUMLOCK KEY ON YOUR COMPUTER WILL NOT AFFECT THE
NUMLOCK STATUS OF THE KEYPAD.
Function Keys in Keypad Mode Only:
Key Function
MODE Switches between calculator and keypad
modes
€Input Euro symbol
Definition of the Keypad Keys:
.
Del
NumLock on - inserts a decimal point
NumLock off - deletes a number
0
Ins
NumLock on - enters “0” on the display
NumLock off - emulates the Insert key
00
,
NumLock on - enters “00”
NumLock off - inserts a comma ( , )
1
End
NumLock on - enters “1” on the display
NumLock off - emulates the End key
2

NumLock on - enters “2” on the display
NumLock off - moves the cursor down one
line of text
3
PgDn
NumLock on - enters “3” on the display
NumLock off - emulates the Page Down key

Targus Wireless Stow-N-Go Calculator Keypad
4

NumLock on - enters “4” on the display
NumLock off - moves one character to the
left of the cursor position
5NumLock on - enters “5” on the display
NumLock off - No function
6

NumLock on - enters “6” on the display
NumLock off - moves one character to the
right of the cursor position
7
Home
NumLock on - enters “7” on the display
NumLock off - emulates the Home key
8

NumLock on - enters “8” on the display
NumLock off - moves the cursor up one line
of text
9
PgUp
NumLock on - enters “9” on the display
NumLock off - emulates the Page Up key

Targus Wireless Stow-N-Go Calculator Keypad
About the Display
The display shows the number you input, calculation
results, and various indicators showing the status of the
calculator.
-MINUS Negative value indicator
MEM Independent memory indicator
ERR Error Indicator
‘ 3-digit separator
CALC Indicates calculator mode
KEYPAD Indicates keypad mode
GT Grand total
CUR Currency calculation
EURO Euro calculation

Targus Wireless Stow-N-Go Calculator Keypad
Setting CUR and EURO Functions
(in Calculator mode)
CUR Function
1 Press CUR key for 1.5~2 seconds
The “CUR” indicator on the LCD will start flashing.
2 Input your desired parameter then press the CUR key
again.
The “CUR” indicator will disappear to indicate the setting
is accomplished.
When the LCD displays “0”, you can press the “CUR” to
enable or disable the indicator on the LCD.
With your parameter numerals displayed on the LCD,
press the “CUR” button and it will exchange to the
currency.
Examples: The parameter is 34 and the currency
amount you want to convert is 180.
A With the “CUR” indicator displayed on the LCD:
› Enter 180 and press the CUR key to calculate 180*34.
The calculation result will be 6120.
B With the “CUR” indicator not displayed on the LCD:
› Enter 180 and press the CUR key to calculate 180/34.
The result will be 5.29.

Targus Wireless Stow-N-Go Calculator Keypad
Euro Function:
1 Press the key for 1.5~2 seconds
The “Euro” indicator on the LCD will start flashing.
2 Input your desired parameter then press the key again.
The “Euro” indicator will disappear to indicate the setting is
accomplished.
When the LCD displays “0”, you can press the “CUR“ to
enable or disable the indicator on the LCD.
With your parameter numerals displayed on the LCD, press
the “Euro” button and it will exchange to the tax rate.
Examples: The Euro parameter is 105 and the currency
amount you want to convert is 180.
A With the “Euro” indicator displayed on the LCD:
› Press Euro key to calculate 180*105. The result will be
18900.
B The “Euro” indicator not displayed on the LCD:
› Press the Euro key to calculate 180/105. The result will
be 1.71.
Setting the Tax Function
1 Press “%” key for 1~1.5 seconds
The “TAX” indicator on the LCD will start flashing.
2 Input your desired parameter and press “%” again.
The “TAX” indicator will disappear to indicate the setting
is accomplished.

Targus Wireless Stow-N-Go Calculator Keypad
Examples: The Tax parameter is 10 and the sales price
is 180.
a Enter 180 and press < Fn+Tax+ >. The calculation
result will be 198 (180 * (1+0.1)).
b Enter 180 and press < Fn+Tax- >. The calculation result
will be 163.63 (180/(1+0.1))
Sending Calculation Results from
the Calculator to Your Computer
When the device is in calculator mode, you can send
calculation results to the cursor location in the active
program on your computer. To do this, after calculating
your equation, press the SEND key.
Operating Hints
For optimal performance and RF reception:
• Place the receiver at least 20cm away from all electrical
devices, such as your monitor, speakers or external
storage devices.

Targus Wireless Stow-N-Go Calculator Keypad
Power Management
• To extend the life of your batteries, power off the battery
with the on/off switch located on the back of the keypad
while traveling or when you’re not using it.
• Battery Low Indicator: LED flashes
NOTE: PLEASE REPLACE THE BATTERIES WHEN THE BATTERY LOW LED
STARTS FLASHING.
• The keypad’s power saving mode feature activates after
4 minutes of non-operation.To activate the keypad, press
the NumLock key.
Troubleshooting
What do I do if the keypad does not work?
• Make sure that the polarity of the batteries is correct. The
positive (+) and negative (-) ends of each battery must
match the positive (+) and negative (-) connections in the
battery housing.
• Check that the receiver’s USB connector is firmly attached
to the USB port on your computer.
• Verify that the device drivers are installed.
• Make sure you have established a communication link.
See “Establishing a Communications Link”.

Targus Wireless Stow-N-Go Calculator Keypad
When I use the calculator/keypad, other
wireless devices work more slowly or fail
temporarily – what should I do?
• The calculator/keypad may cause interference with
any cordless, radio-based device such as a telephone,
baby monitor, or toy. To reduce interference, move the
calculator/keypad’s receiver and the base unit of the
affected device as far away from each other as possible.
• You can also reset the calculator/keypad’s identification
code. To do this, See “Establishing a Communications
Link”.
What do I do if the response time of the
calculator/keypad is slow or it intermittently
stops working?
Try one or more of the following:
• Increase the distance between the receiver and the rest
of your computer equipment.
• Increase the distance between the receiver and the base
units of other wireless devices.
• Turn off any wireless devices and their base units that are
near the keypad’s receiver.
• If you are using the keypad on a metal surface, move it
and the receiver to a non-metal surface. Metals, such
as iron, aluminum or copper, shield the radio frequency
transmission and may slow down the keypad’s response
time or cause the keypad to fail temporarily.
• Replace the batteries.

Targus Wireless Stow-N-Go Calculator Keypad
Specifications
Operation Frequency 2.4 GHz
Operating Distance Up to 10m
Operating Voltage Calculator / Keypad 2.4V
Receiver: 5V
Operating Current Calculator / Keypad 10mA maximum
Receiver: 16mA maximum
Suspend Mode Calculator / Keypad Below 300 uA
Dimensions Calculator / Keypad 155 x 92 x 26 mm
Receiver: 58 x 16 x 10 mm
Weight Calculator / Keypad 180g
Receiver: 10g

Targus Wireless Stow-N-Go Calculator Keypad
Technical Support
For technical questions, please visit:
Internet: www.targus.com/support.asp
Email: info[email protected]
Product Registration
Targus recommends that you register your Targus accessory
shortly after purchasing it. To register your Targus accessory, go
to:
www.targus.com/registration.asp
You will need to provide your full name, email address, country of
residence and product information.
Warranty
Targus warrants this product to be free from defects in materials
and workmanship for one year. If your Targus accessory is found
to be defective within that time, we will promptly repair or replace
it. This warranty does not cover accidental damage, wear and tear,
or consequential or incidental loss. Under no conditions is Targus
liable for loss of, or damage to a computer; nor loss of, or damage
to, programs, records, or data; nor any consequential or incidental
damages, even if Targus has been informed of their possibility.This
warranty does not affect your statutory rights.

Targus Wireless Stow-N-Go Calculator Keypad
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
FCC Statement
Tested to Comply
limits of a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected;
• Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not authorized by the party responsible
for compliance could void the user’s authority to operate this
product.
Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries. All trademarks and
egistered trademarks are the properties of their respective owners. All rights reserved.