Taurus Dual Pro Leg Press/ Calf Ext User manual

SESS7137.01.01
TF- Taurus Dual Pro Leg Press/ Calf Ext.
max. 180 kg
L 194 | B 114 | H 150
~ 60 Min.
CM
300 kg
Assembly and Operating Instructions
Art. No. SESS7137

2
Leg Press/ Calf Ext.

3
Content
1 GENERAL INFORMATION 7
1.1 Technical Data 7
1.2 Personal Safety 8
1.3 Set-Up Place 9
2 ASSEMBLY 10
2.1 General Instructions 10
2.2 Scope of Delivery 11
2.3 Assembly 15
3 STORAGE AND TRANSPORT 26
3.1 General Instructions 26
4 TROUBLESHOOTING, CARE AND MAINTENANCE 27
4.1 General Instructions 27
4.2 Faults and Fault Diagnosis 27
4.3 Maintenance and Inspection Calendar 28
5 DISPOSAL 28
6 RECOMMENDED ACCESSORIES 29
7 ORDERING SPARE PARTS 30
7.1 Serial Number and Model Name 30
7.2 Parts List 31
7.3 Exploded Drawing 35
8 WARRANTY 37
9 CONTACT 39

4
Leg Press/ Calf Ext.

5
Dear customer,
Thank you for choosing a high-quality equipment of the brand Taurus®. Taurus® oers sports and
tness equipment for the sophisticated home sport and the equipment of tness studios and
business customers.WithTaurus® tness equipment, the focus is on what sport is all about: maximum
performance! Therefore, the equipment is developed in close consultation with athletes and sports
scientists. Because athletes know best what makes perfect tness equipment.
Further information can be found at www.sport-tiedje.com.
Legal Notice
Sport-Tiedje GmbH
Europe’s No. 1 for home tness
International Headquarters
Flensburger Straße 55
24837 Schleswig
Germany
Management:
Christian Grau
Sebastian Campmann
Dr. Bernhard Schenkel
No. HRB 1000 SL
Local Court Flensburg
European VAT Number: DE813211547
Disclaimer
©2011 Taurus® is a registered brand of the company SportTiedje GmbH. All rights
reserved. Any use of this trademark without the explicit written permission of Sport-
Tiedje is prohibited.
Product and manual are subject to change. Technical data can be changed without
advance notice.
Intended Use
The equipment may only be used for its intended purpose.
This tness equipment is suitable for home use, semi-professional use and commercial or
professional use. The semi-professional sector includes, for example, institutional facilities such
as hospitals, schools, hotels and associations. Professional use refers to commercial use, e.g. in a
tness studio.

6
Leg Press/ Calf Ext.
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and rst use. The manual will help you to
quickly set up the system and explains how to safely use it. Make sure that all persons exercising with
the equipment (especially children and persons with physical, sensory, mental or motor disabilities)
are informed about this manual and its contents in advance. In case of doubt, responsible persons
must supervise the use of the equipment.
Due to ongoing changes and software optimisations, the manual may have to be updated. If
you notice any discrepancies during assembly or use, please refer to the manual uploaded to the
webshop. The latest manual is always available there.
This equipment has been manufactured according to the latest safety knowledge. As far as possible,
potential safety hazards which could cause injury have been eliminated. Make sure to carefully follow
the instructions and that all parts are securely in place. If required, read through the
instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given here.
The contract partner cannot be held liable for damage to health, accidents or
damage to the equipment when it is not used in accordance with these instructions.
The following safety instructions may appear in this manual:
࣑ATTENTION
This notice indicates potentially hazardous situations which, if not avoided, may result in
property damage.
⚠CAUTION
This notice indicates potentially hazardous situations which, if not avoided, may result in slight
or minor injuries!
⚠WARNING
This notice indicates potentially hazardous situations which, if not avoided, may result in death
or serious injuries!
⚠DANGER
This notice indicates potentially hazardous situations which, if not avoided, will result in death
or serious injuries!
LNOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering
replacement parts.

7
1 GENERAL INFORMATION
1.1 Technical Data
Weight and dimensions:
Packaging dimensions (L x W x H) and weight approx:
No.1: 163 cm x 91 cm x 19.5 cm 25 kg/ 55 lbs
No.2: 152 cm x 89 cm x 28.5 cm 35 kg/ 55 lbs
No.3: 189 cm x 83 cm x 51 cm 137 kg/ 302 lbs
No.4: 9 cm x 40 cm x 4 cm 10 kg/ 22 lbs
Box 5 (weight plates): 30.5 cm x 11.5 cm x 12.5 cm 136 kg/ 300 lbs total
Article weight (net, without packaging): 300.8 kg/ 663 lbs
Set-up dimensions (L x W x H) approx.: 194 cm x 113.5 cm x 149.8 cm
Maximum user weight: 180 kg/ 397 lbs
Cables and pulleys:
Cable length: 397.5 cm
Material: Carbon Steel
Coating: Nylon
Diameter pulleys: 89/114 mm
Transmission ratio: 3:5
Weight block:
Quantity: 1
Total weight: 126 kg/ 278 lbs
Quantity of weight plates: 14 +1
Weight of a single weight plate: 9 kg/ 20 lbs

8
Leg Press/ Calf Ext.
1.2 Personal Safety
⚠DANGER
+ Before you start using the equipment, you should consult your physician that this type of
exercise is suitable for you from a health perspective. Particularly aected are persons who:
have a hereditary disposition to high blood pressure or heart disease, are over the age of 45,
smoke, have high cholesterol values, are overweight and/or have not exercised regularly in
the past year. If you are under medical treatment that aects your heart rate, medical advice
is absolutely essential.
+ Note that excessive training can seriously endanger your health. Please also note that
heart rate monitoring systems can be inaccurate. If you notice any signs of weakness,
nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising
immediately and seek advice from your doctor if necessary.
⚠WARNING
+ This equipment may not be used by children under the age of 14.
+ Children should not be allowed unsupervised access to the equipment.
+ Persons with disabilities must have a medical license and must be under strict observation
when using the equipment.
+ The equipment is strictly for use by one person at a time.
+ If your equipment provides a safety key, the clip of the safety key must be attached to your
clothing before starting your training. In the event of a fall, the EMERGENCY STOP of the
equipment can be initiated.
+ Keep your hands, feet and other body parts, hair, clothing, jewellery and other objects well
clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing.When wearing
sports shoes, make sure they have suitable soles, preferably made of rubber or other non-
slip materials. Shoes with heels, leather soles, studs or spikes are unsuitable. Never exercise
barefoot.
⚠CAUTION
+ If your equipment needs to be connected to the power supply with a mains cable, make
sure that the cable is not a potential tripping hazard.
+ Make sure that nobody is within the range of motion of the equipment during training so as
not to endanger you or other persons.
࣑ATTENTION
+ Do not insert any objects of any kind into the openings of the device.

9
1.3 Set-Up Place
⚠WARNING
+ Do not place the equipment in main corridors or escape routes.
⚠CAUTION
+ Choose a location in which to place the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The training room should be well ventilated during training and not be exposed to any
draughts.
+ Choose the place in which to set up the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be at, loadable and solid.
࣑ATTENTION
+ The device may only be used in one building, in suciently tempered and dry rooms
(ambient temperatures between 10°C and 35°C). The equipment should not be used
outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A oor protective mat/equipment underlay can help to protect high-quality oor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight
unevenness.

10
Leg Press/ Calf Ext.
2 ASSEMBLY
2.1 General Instructions
⚠DANGER
+ Do not leave any tools, packaging materials such as foils or small parts lying around,
as otherwise there is a danger of suocation for children. Keep children away from the
equipment during assembly.
⚠WARNING
+ Pay attention to the instructions attached to the equipment in order to reduce the risk of
injuries.
⚠CAUTION
+ Ensure to have sucient room for movement in each direction during assembly.
+ The assembly of the equipment must be carried out by at least two adults. If in doubt, seek
the help of a third technically skilled person.
࣑ATTENTION
+ To prevent damage to the equipment and the oor, assemble the equipment on a mat or
packaging board.
LNOTICE
+ In order to make the assembly as simple as possible, some screws and nuts to be used can
already be pre-assembled.
+ Ideally, assemble the equipment at its later set-up place.

NAME. DESCRIPTION. QTY.
OPERATER.
Left shield 2
Right shield 2
Side shield 2
Tray 2
Connecting strip 4
NAME. DESCRIPTION. QTY.
OPERATER.
Frame 1
Pulley set(φ114) 1
Pulley set(φ89) 1
Pulley baffle 1
Carton 5-1
ITEM NO.
005
006
007
010
011
Carton 5-2
ITEM NO.
001
013
012
004
005 + 008 +
006
Left shield + rear
middle trim +
right shield
005 + 009 +
006
Left shield + front
middle trim +
right shield
Carton 5-1
Carton 5-2
11
2.2 Scope of Delivery
The scope of delivery consist of the following parts. At the beginning, check whether all parts
and tools belonging to the device are included in the scope of delivery and whether damage has
occurred. In the event of complaints, the contractual partner must be contacted directly.
⚠CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must not be carried out.

NAME. DESCRIPTION. QTY.
10 pounds balance
weight sets 1
Cable set 1
Upper rotation frame 1
Main frame 1
Swing frame 1
Cam frame 1
Upright Frame 1
Balance frame 1
Inner support frame 1
37-2
36-2
34-2&40
33-2
41
35-2
39
Carton 5-3
ITEM NO.
74
75
12
Leg Press/ Calf Ext.

NAME. DESCRIPTION. QTY.
Arm Pad 1
Seat Pad 1
Back Cushion 1
NAME. DESCRIPTION. QTY.
10lb weight stack
plate 11
72&73
ITEM NO.
Carton 5-5
ITEM NO.
106
108
110
Carton 5-4
13

14
Leg Press/ Calf Ext.

001 Frame 1
027 Hexagon socket countersunk head screws M12*30 4
032 Flat washer Φ24*Φ13*2.5 4
033-1 Spring washer M12 4
33-2 Main Frame 1
34-2 Joint Frame 1
74 Plain washer Φ24*Φ13*2.5 4
75 Spring washer M12 4
76 Hex socket head cap screw M12*30 4
No. Name Specication Qty.
15
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
LNOTICE
+ First loosely screw all parts together and check that they t properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have diculty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the le.
Step 1: Assembly of Main Frame and Joint Frame
1. Assemble the joint frame (34-2) to the frame (001) by using four screws
(027), four spring washers (033-1) and four at washers (032).
2. Assemble the joint frame (34-2) to the main frame (33-2) by using four
screws (76), four spring washers (75) and four plain washers (74).

35-2 Front swing span 1
36-2 Main swing span 1
37-2 Pedal frame 1
46 Axle 2 2
81 Circlips for shaft Φ25 4
No. Name Specication Qty.
16
Leg Press/ Calf Ext.
Step 2: Assembly of Pedal Frame
Assemble the pedal frame (37-2) to the main swing span (36-2) and the front swing span (35-2) by
using two axles (46) and four circlips (81).

33-2 Main Frame 1
43 Left handle bracket 1
44 Right handle bracket 1
77 Plain washer Φ20*Φ10.5*2 4
79 Nylon insert lock nut M10 2
90 Hex socket head cap screw M10*35 2
No. Name Specication Qty.
17
Step 3: Assembly of Left and Right Handle Bracket
Assemble the left handle bracket (43) and the right handle bracket (44) to the main frame (33-2) by
using two screws (90), four plain washers (77) and two lock nuts (79).

40 Backrest support 1
42 Backrest adjusting board 1
49 Axle 3 Φ25*176 1
67 Limiting rubber 2
81 Circlips for shaft Φ25 2
86 Plain washer Φ16*Φ8.4*1.6 4
87 Spring washer M8 2
88 Hex socket head cap screw M8*25 2
89 Hex socket head cap screw M8*20 2
No. Name Specication Qty.
18
Leg Press/ Calf Ext.
Step 4: Assembly of Backrest Adjusting Board and Backrest Support
1. Assemble the backrest adjusting board (42) to the backrest support (40) by using two screws
(88), two spring washers (87) and two plain washers (86).
2. Assemble two screws (89), two plain washers (86) and two limiting rubbers (67) to the backrest
adjusting board (42).
3. Assemble the backrest support (40) to the main frame (33-2) by using one axle (49) and two
circlips (81).

33-2
19

013
63
20
Leg Press/ Calf Ext.
Step 5: Assembly of the Pulleys and Cable Routing
LNOTICE
+ The majority of the pulleys are pre-assembled when delivered. These pulleys need to be
disassembled in order to perform the cable routing.
+ The two pulleys (012 and 013) for the frame are not pre-assembled
1. Route the cable (45) over the pulley set (013) and assemble the pulley set (013) to the upper side
of the frame (001) and pulley bae (004) with the pre-assembled screw (026), two at washers
(031) and one nut (034-1).
2. Route the cable (45) down and under the pulley set (012) and assemble the pulley set (012) to
the lower side of the frame (001) with the pre-assembled screw (025), two at washers (031)
and one nut (034-1).
3. Disassemble pulley (63) in location A, route the cable (45) around and reassemble the pulley
(63).
4. Disassemble pulley (63) in location B, route the cable (45) around and reassemble the pulley
(63).
5. Disassemble pulley (63) in location C, route the cable (45) around and reassemble the pulley
(63).
6. Attach the lower cable end (45) to the
knuckle bearing (53).