HD-R1 V1.01 Read Me
TASCAM HD-R1
HD-P2 Compact Flash media can now be used for
•playback. “H” appears on the LCD screen when such
media is in use.
If a track that does not exist is selected using direct
•play (from an RC-SS20), the unit stops.
New functions
When track names are updated on a Compact Flash
•card, the list of the track names on the card is sorted
again.
An error that occurred in moving the minutes when
•setting the time with the shuttle wheel has been fixed.
A message now appears when the number of tracks in
•a folder reaches 1023.
An error that occurred in which the remaining time
•of the track was mistakenly shown based on the
sampling rate of the previous track after using the
SKIP key or otherwise switching to a track with a
different sampling rate has been fixed.
A problem in which S/PDIF signals could not be
•received after “Media full” messages has been
fixed.
A problem in which Network settings were not
•changed even when the ENTER key had been pushed
has been fixed.
A problem in which tracks uploaded by FTP would
•play early or late has been fixed.
The problem in which the Playlist menu Delay
•Interval option did not function has been fixed.
Maintenance items
The timeout time using serial control has been elimi-
•nated. Telnet Control has a 900-second timeout.
A problem in which the unit would stop when trans-
•ferring 50 megabytes of data or more by FTP has
been fixed.
A problem in which the beginning of the track's
•sound would be played back after single mode play-
back has been fixed.
A problem in which the R output did not change even
•when the reference level (“Ref Level”) was changed
has been fixed.
When in a PLAY READY state, the sampling rate of
•the unit now changes to that of the current track.
It is now possible to press the
•CURRENT + SKIP keys
as a shortcut to move to the top directory.
The FTP Transmission speed has been accelerated.
•
By accelerating recording processing, the writing
•time that had been required when turning prerecord-
ing ON during Sync recording has been reduced.
Windows Media Player WAV Files can now be played
•back.
If any track names exceed eight characters, no more
•than 1000 tracks can be created in a folder. To record
up to 1023 tracks in a folder, give all tracks names
that are no more than eight characters.
The remaining time displayed during MP3 track play-
•back is slightly inaccurate. This does not affect play-
back.
When sending multiple tracks by FTP using a static
•LAN, an error occurs in which the set IP address is
automatically changed. Please use DHCP when send-
ing multiple tracks by FTP.
When Auto Cue is set to –24 dBFS and Ducking
•Threshold is set to –18 dBFS or –12 dBFS, noise
when ducking starts can be heard in some cases.
Please turn Auto Cue OFF when using Ducking.
In the product Owner’s Manual, in the “New Settings
•File” menu item of the “Manage Play/Rec Settings
Submenu” section, all choices are described as saving
Known issues
the unit’s current settings, but the “Using Factory
Defaults” item initializes the system settings instead.
Even when using a USB card reader that has multiple
•slots, only one slot can be used with the HD-R1.
USB card readers that require drivers other than the
•standard Windows driver cannot be used with this
unit.
To play tracks continuously set the Playback mode
•to Playlist before recording. This will automatically
create a Playlist, allowing continuous playback of
recorded tracks.
D01084100A
