Safety Precautions
This is a sophisticated radio controlled model that must be operated with caution and common
sense. Failure to operate your Micro-T in a safe and responsible manner could result in damage
to the model and property. The Micro-T is not intended for use by children without direct adult
this product or any product required to operate it.
This model is controlled by a radio signal that is subject to interference from many sources
you use.
•
•
•
•
•
•
Soft bristle brush for cleaning
•
•
•
•
damage to the small screws and parts used on this type of model.
Steering Wheel:
Throttle Trigger:
Antenna: Transmits signal to the model.
On/Off Switch:
Indicator Lights:
Adjusts the “hands off” direction of the model.
Adjusts the motor speed to stop at neutral.
Steering Rate:
when the steering wheel is turned left and right.
when the wheel is turned left or right.
when pulled back or pushed forward.
Bottom Cover:
power the transmitter.
Transmitter Crystal:
Transmitter
Throttle
Trigger
the signal from the transmitter to control the
model’s power and direction of the motor.
Receiver Crystal: Determines which channel it
On/Off Switch:
Antenna Wire:
transmitter.
Steering Servo:
power supply.
control.
of the station. The Micro-T radio is equipped with changeable crystals that allow you to change
pushing the new crystals into place. DO NOT force them as damage can occur. If they do not
Making Adjustments
The following are simple adjustments and easily maintained settings that will assure proper op-
both traction control and protection for the transmission. The
slipper is primarily used to help absorb sudden impacts on
-
wheels and limit wheel spin when running on extremely slick
Antenna
Indicator
Lights
Switch
Steering
ST. Trim
Steering
Wheel
Throttle
Trigger
Steering
Socket
Increase
Slip
Decrease
Slip
