Technoline WS9470 User manual

EN1
WS9470 Thermo-Hygrometer - Manual
Overview
A1 - Highest measured humidity value A2 - Lowest measured humidity value
A3 - Comfort level indicator A4 - Highest measured temperature value
A5 - Lowest measured temperature value A6 - Indoor humidity
A7 - Indoor humidity trend A8 - Indoor temperature
A9 - Indoor temperature trend
B1 –“Set” Button B2 –“▲” Button
B3 –“▼” Button B4 –“°C/°F” Button
C1 –Table stand

EN2
Getting started
Open the battery compartment.
Insert 2 x 1.5V AAAbatteries, accordingly to correct +/- polarity as indicated in the battery
compartment. The measured temperature and humidity will appear on the display.
Close the battery compartment again.
Temperature display
Press the °C/°Fbutton to change between °C（Celsius）or °F（Fahrenheit）as temperature unit.
Trend indicator
The trend arrows indicate whether the values for temperature and humidity are currently
increasing (arrow upwards), steady (arrow sideways) or decreasing (arrow downwards).
Comfort level
A marking appears on the display to indicate the comfort level:
Marking near LOW means that the environment is too dry.

EN3
Marking near OK means that the environment is comfortable.
Marking near HIGH means that the environment is too humid.
Maximum and minimum values
There are two memory modes for the displayed highest and lowest values of high and
low for temperature and humidity.
Press the ▲ or ▼ button in normal mode view the 24hrs or all-time display mode of the
maximum-minimum values.
All-time mode:As soon as the station is active the maximum and minimum values will be
stored.
24hrs mode:The maximum and minimum values will be reset every 24 hours(form the
moment of activation).

EN4
Manual reset
Press and hold the ▲ button in the respective displaymode to clear the recorded high
reading.
Press and hold the ▼ button in the respective display mode to clear the recorded low
reading.
Calibration function
The thermo-hygromenter allows the user to calibrate the display of temperature and humidity
measurements with an external,better reference source. The user can make adjustments to the
temperature and humidity displays within the measuring range.
When replacing batteries the calibrated values are deleted automatically.

EN5
Calibration of the humidity and temperature display
Press and hold the SET button for 3 seconds and the humidity flashes. Press the ▲ or
▼button to correct the display of the humidity. CALIBRATED appears under humidity on
the display.
Press SET button shortly to confirm the changes and the temperature flashes. Press the
▲ or ▼button to correct the display of the temperature. CALIBRATED appears under
temperature on the display.
Press SET button shortly to confirm the changes and exit the setting mode.
Note: CALIBRATED is shown on the display as long as the values stay calibrated.
Low battery icon
Change the batteries once the battery symbol appears on the display.
Precautions
This unit is intended to be used only indoors.

EN6
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
Do not immerse in water.
Avoid contact with any corrosive materials.
Do not dispose this unit in a fire as it may explode.
Do not open the inner back case or tamper with any components of this unit.
Batteries safety warnings
Use only alkaline batteries, not rechargeable batteries.
Install batteries correctly by matching the polarities (+/-).
Always replace a complete set of batteries.
Never mix used and new batteries.
Remove exhausted batteries immediately.
Remove batteries when not in use.
Do not recharge and do not dispose of batteries in fire as the batteries may explode.
Ensure batteries are stored away from metal objects as contact may cause a short circuit.
Avoid exposing batteries to extreme temperature or humidity or direct sunlight.

EN7
Keep all batteries out of reach from children. They are a choking hazard.
Use the product only for its intended purpose!
Consideration of duty according to the battery law
Old batteries do not belong to domestic waste because they could cause
damages of health and environment. You can return used batteries free of
charge to your dealer and collection points. As end-user you are committed
by law to bring back needed batteries to distributors and other collecting points!
Consideration of duty according to the law of electrical devices
This symbol means that you must dispose of electrical devices separated
from the General household waste when it reaches the end of its useful life.
Take your unit to your local waste collection point or recycling centre. This
applies to all countries of the European Union, and to other European countries with a
separate waste collection system.