TECshow NEBULA DUAL User manual

NEBULA DUAL
RGBUV 4 IN 1 LED PAR LIGHT
USER MANUAL
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

P. 2
English Version | Tecshow NEBULA DUAL
NEBULA DUAL
Specifications
Source & Optics
• Light Source: 4pcs*50W WA + 16PCS*8W RGBUV 4
in 1 LED.
• Power supply: AC90-240V, 50-60HZ
• Power consumption: 120W
• Function: 4pcs white + Warm white with single
pixel.
Control
• DMX channels: 12
• Operation modes: DMX512/Sound/Auto/Master/
slave.
Physical
• Display: LCD
• Weight: 1.9 Kgs
• Dimensions: 250x85x250 mm
1· OVERVIEW

P. 3
English Version | Tecshow NEBULA DUAL
• Please keep this User Manual for future reference.
If you sell the unit to another user, be sure that he
also receives this instruction booklet.
• Unpack and check the unit carefully that it has
not been damaged during transport before using
the unit.
• Before operating, ensure that the voltage and
frequency of power supply match the power
requirements of the unit.
• The unit should be connected to a main socket
outlet with a protective earth connection.
• The unit is for indoor use only in a dry location.
• The unit must be installed in a location with
adequate ventilation, at least 0,5m from adjacent
surfaces. Be sure that no ventilation slots are
blocked.
Before mounting the xture to any surface ,make sure
that the installation area can hold a minimum point
load of 10 times the device’s weight.
Fixture installation must always be secured with a
secondary safety attachment ,such as an appropriate
safety cable.
CAUTION!
For added protection mount the xtures in areas outside walking paths ,seating areas,or in areas were
the xture might be reached by unauthorized personnel.
Never stand directly below the device when
mounting ,removing ,or servicing the xture, from a
ceiling,or set on a at level surface (see illustration
below). Be sure this xture is kept at least 0.5m (1.5)
away from any ammable (decoration etc.)
Always use and install the supplied safety cable as
a safe cable as safety measure to prevent accident
damage and /or injury in the event the clamp fails.
For your own personal safety, please
read and understand this manual
completely before you attempt to
install or operate this unit!
2. INTRODUCTION
• Disconnect mains power before fuse replacement
or servicing.
• Replace fuse only with the same type.
• Make sure there are no inammable material
close to the unit during operation.
• Use safety cable when xing this unit. In the
event of serious operating problem, stop using
the unit immediately.
• Never try to repair the unit by yourself. Repair
carried out by unskilled people can lead to
damage or malfunction.
• Please contact the nearest authorized technical
assistance center and always use the same type
of spare parts.
• Do not touch any wires during operation as high
voltage might be causing electric shock.

7. DISPLAY MENU
1 A001 A001-512 DMX mode 12CH
2 Au01 Au01-15 Fixed color selection
3 UF01 UF01-99 RGBUV Color jumps
4FF01 FF01-99 WW/CWColor jumps
5UC01 UC01-99 RGBUV Color gradient
6FC01 FC01-99 WW/CW Color gradient
7UE01 UE01-99 RGBUV Color pulsations
8FE01 FE01-99 WW/CW Color pulsations
9r001 R000-255 Red ,manual dimming
10 G001 G000-255 Green, manual dimming
11 b001 B000-255 Blue, manual dimming
12 P001 P000-255 UV manual dimming
13 U001 U000-255 Warm white, manual dimming
14 C001 C000-255 Cool white manual dimming
15 F000 F000-255 Strobe mode 1-20Hz
16 Auto Automatic mode, repeated cloud line jump/gradient/pulse change
17 Soud
bLOF/bLON "OFF" Indicates that the silent control does not close the light “ON"
Silent control of the black eld
Enter from bLOF by MENU: VOL1 ~VOL9 1-9 sensitivity adjustment

8. DMX CHANNELS
CHS CH VALUE FEATURE DESCRIPTION
CH1 0-255 0-100% Linear total dimming
CH2 0Strobe o
0-255 Strobes range from slow to fast 1-20Hz
CH3 0Red o
1-255 0-100% Linear dimming
CH4 0Green o
1-255 0-100% Linear dimming
CH5 0Blue o
1-255 0-100% Linear dimming
CH6 0UV o
1-255 0-100% Linear dimming
CH7 0WW 1o
1-255 0-100% Linear dimming
CH8 0CW 1 o
1-255 0-100% Linear dimming
CH9 0WW 2 o
1-255 0-100% Linear dimming
CH10 0CW 2 o
1-255 0-100% Linear dimming
CH1
0-10 No function, the rst 10 channels are valid
11-40 RGBUV Color jumps
41-70 WW/CW Color jumps
71-100 RGBUv Color gradient
101-130 WW/CW Color gradient
131-160 RGBUv Color pulsations
161-190 WW/CW Color pulsations
191-220 Auto Mode
221-255 Sound Mode
CH12 0-255 Speed from slow to fast / sensitivity from small to large
12 CHANNEL DEFINITION TABLE

amproweb.com
/amprogroup /amprogroup