Tektronix MDO4104-6 User manual

Tektronix MDO4034-3 Manual
Get Pricing & Availability at
ApexWaves.com
Call Today: 1-800-915-6216
Email: [e-mail]
https://www.apexwaves.com/oscilloscopes/tektronix-inc/mdo4000/MDO4034-3

x
MDO4000 Series
Mixed Domain Oscilloscopes
ZZZ
User Manual
*P071291300*
071-2913-00

MDO4000 Series
Mixed Domain Oscilloscopes
ZZZ
User Manual
xx
www.tektronix.com
071-2913-00

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are
protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all
previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
e*Scope, iView, OpenChoice, TekSecure, and TekVPI are registered trademarks of Tektronix, Inc.
MagniVu and Wave Inspector are trademarks of Tektronix, Inc.
PictBridge is a registered trademark of the Standard of Camera & Imaging Products Association CIPA DC-001-2003 Digital Photo
Solutions for Imaging Devices.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.

MDO4000 Series Oscilloscopes
Warranty
Tektronix warrants that the product will be free from defects in materials and workmanship for a period of three (3) years from the date
of original purchase from an authorized Tektronix distributor. If the product proves defective during this warranty period, Tektronix, at its
option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the
defective product. Batteries are excluded from this warranty. Parts, modules and replacement products used by Tektronix for warranty
work may be new or reconditioned to like new performance. All replaced parts, modules and products become the property of Tektronix.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the warranty
period and make suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping
the defective product to the service center designated by Tektronix, shipping charges prepaid, and with a copy of customer proof of
purchase. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which
the Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other
charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and
care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel
other than Tektronix representatives to install, repair or service the product; b) to repair damage resulting from improper use or
connection to incompatible equipment; c) to repair any damage or malfunction caused by the use of non-Tektronix supplies; or
d) to service a product that has been modified or integrated with other products when the effect of such modification or integration
increases the time or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY OTHER WARRANTIES,
EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS
IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX
AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
[W16 – 15AUG04]

P6616, TPP0500, and TPP1000 Probes
Warranty
Tektronix warrants that the product will be free from defects in materials and workmanship for a period of one (1) year from the date of
original purchase from an authorized Tektronix distributor. If the product proves defective during this warranty period, Tektronix, at its
option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the
defective product. Batteries are excluded from this warranty. Parts, modules and replacement products used by Tektronix for warranty
work may be new or reconditioned to like new performance. All replaced parts, modules and products become the property of Tektronix.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the warranty
period and make suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping
the defective product to the service center designated by Tektronix, shipping charges prepaid, and with a copy of customer proof of
purchase. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which
the Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other
charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and
care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel
other than Tektronix representatives to install, repair or service the product; b) to repair damage resulting from improper use or
connection to incompatible equipment; c) to repair any damage or malfunction caused by the use of non-Tektronix supplies; or
d) to service a product that has been modified or integrated with other products when the effect of such modification or integration
increases the time or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY OTHER WARRANTIES,
EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS
IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX
AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
[W15 – 15AUG04]

Table of Contents
Table of Contents
General Safety Summary ............................................................................................................. v
Compliance Information .............................................................................................................. vii
EMC Compliance................................................................................................................ vii
Safety Compliance............................................................................................................. viii
Environmental Considerations................................................................................................... ix
Preface................................................................................................................................. xi
Key Features .....................................................................................................................xi
Conventions Used in This Manual............................................................................................... xi
Installation.............................................................................................................................. 1
Before Installation................................................................................................................ 1
Operating Considerations........................................................................................................ 5
Operating Positions ..............................................................................................................7
Connecting Probes............................................................................................................... 8
Securing the Oscilloscope....................................................................................................... 9
Powering on the Oscilloscope .................................................................................................. 10
Powering off the Oscilloscope.................................................................................................. 11
Functional Check................................................................................................................ 11
Compensating a TPP0500 or TPP1000 Passive Voltage Probe.............................................................. 12
Compensating a non-TPP0500 or non-TPP1000 Passive Voltage Probe............................ .... .................... 14
Application Module Free Trial................................................................................................... 15
Installing an Application Module. ........................................................... ...... .... .. .... ...... .............. 15
Changing the Language of the User Interface or Keyboard....... ................... ................. .... .................... 16
Changing the Date and Time................................................................................................... 17
Signal Path Compensation ..................................................................................................... 19
Upgrading Firmware ............................................................................................................ 21
Connecting Your Oscilloscope to a Computer .... ................................. ....................... .... ................. 24
Connecting a USB Keyboard to Your Oscilloscope.......... .... ................. .... ................. .... ................. ... 32
Get Acquainted with the Instrument ................................................................................................. 33
Front-Panel Menus and Controls ............................. .... ................................... .... ....................... 33
Front-Panel Connectors ........................................................................................................ 47
Side-Panel Connector........................................................................................................... 47
Rear-Panel Connectors......................................................................................................... 48
Acquire the Signal .................................................................................................................... 50
Setting Up Analog Channels.................................................................................................... 50
Using the Default Setup......................................................................................................... 53
Using Autoset ................................................................................................................... 54
Acquisition Concepts............................................................................................................ 55
How the Analog Acquisition Modes Work..... ..................... ..................... .... ................. .... .............. 57
Changing the Acquisition Mode, Record Length, and Delay Time. ............... ............................................ 57
Using Roll Mode................................................................................................................. 59
Setting Up a Serial or Parallel Bus ............................................................................................. 60
Setting Up Digital Channels .................................................................................................... 73
MDO4000 Series Oscilloscopes User Manual i

Table of Contents
When and Why to Turn On MagniVu........................................................................................... 75
Using MagniVu .................................................................................................................. 75
Setting Up the RF Inputs........................................................................................................ 76
Trigger Setup ......................................................................................................................... 80
Triggering Concepts............................................................................................................. 80
Choosing a Trigger Type........................................................................................................ 83
Selecting Triggers...............................................................................................................84
Triggering on Buses............................................................................................................. 86
Checking Trigger Settings ...................................................................................................... 90
Using Sequence Trigger (A (Main) and B (Delayed)).. .... ................................ .... ................. ............... 91
Starting and Stopping an Acquisition...................... .... ............................. .... ....................... .... ..... 93
Triggering on the RF Input...................................................................................................... 93
Display Waveform or Trace Data .................................................................................................... 96
Adding and Removing a Waveform ................................... .... ....................... .... ..................... ..... 96
Setting the Display Style and Persistence ..................................................................................... 96
Setting Waveform Intensity ................................................................................................... 100
Scaling and Positioning a Waveform......................................................................................... 101
Setting Input Parameters ..................................................................................................... 102
Positioning and Labeling Bus Signals... .... ....................... .... ..................... ....................... .... ...... 106
Positioning, Scaling, and Grouping Digital Channels..... .... ....................... .... ............................. .... ... 106
Viewing Digital Channels ..................................................................................................... 108
Annotating the Screen ........................................................................................................ 108
Viewing the Trigger Frequency............................................................................................... 109
Displaying the Frequency Domain Menu..................... ..................... ..................... .... ................. . 110
Analyze Waveform orTrace Data.................................................................................................. 117
Using Markers in the Frequency Domain ............................................................................. ...... . 117
Taking Automatic Measurements in the Frequency Domain................................................................ 120
Taking Automatic Measurements in the Time Domain ...................................................................... 121
Selecting Automatic Measurements in the Time Domain ................................................................... 122
Customizing an Automatic Measurement in the Time Domain.............................................................. 126
Taking Manual Measurements with Cursors ... ........... .... ........... .... ........... ............... ............... ....... 129
Setting Up a Histogram ....................................................................................................... 133
Using Math Waveforms....................................................................................................... 136
Using FFT ..................................................................................................................... 137
Using Advanced Math......................................................................................................... 140
Using Spectrum Math......................................................................................................... 141
Using Reference Waveforms and Traces.................................................................................... 142
Using Wave Inspector to Manage Long Record Length Waveforms............. .... ................. ................... ... 144
Auto-magnify .................................................................................................................. 149
Time-Correlated Multi-Domain Display....................................................................................... 150
Limit and Mask Testing........................................................................................................ 154
Analyzing Power .............................................................................................................. 160
Save and Recall Information....................................................................................................... 161
Saving a Screen Image....................................................................................................... 163
Saving and Recalling Waveform and Trace Data............................................................................ 164
ii MDO4000 Series Oscilloscopes User Manual

Table of Contents
Saving and Recalling Setups................................................................................................. 167
Saving with One Button Push ................................................................................................ 169
Managing Drives, Directories, and Files ..................... .... ............................. .... ....................... .... 170
Mounting a Network Drive .................................................................................................... 170
Printing a Hard Copy.......................................................................................................... 171
Erasing Oscilloscope Memory................................................................................................ 177
Using Application Modules......................................................................................................... 179
Appendix A: MDO4000 Specifications............................................................................................. 180
Appendix B: TPP0500 and TPP1000 500 MHz and 1 GHz 10X Passive Probes Information ............. ........... .......... 184
Operating Information......................................................................................................... 184
Connecting the Probe to the Oscilloscope................................................................................... 184
Compensating the Probe with MDO4000 Series Oscilloscopes .......................... .... ................. ............. 184
Standard Accessories......................................................................................................... 184
Optional Accessories ......................................................................................................... 186
Replacing the Probe Tip ...................................................................................................... 186
Specifications.................................................................................................................. 187
Performance Graphs.......................................................................................................... 187
Safety Summary .............................................................................................................. 189
Appendix C: P6616 General-Purpose Logic Probe Information ................................. ................. ................ 191
Product Description ........................................................................................................... 191
Connecting the Probe to the Oscilloscope ...................... .... ....................... .... ............................. . 191
Connecting the Probe to Your Circuit ............ .... ............................................ .... ....................... . 192
Functional Check.............................................................................................................. 192
Typical Application ............................................................................................................ 193
Accessories ................................................................................................................... 193
Specifications.................................................................................................................. 194
Safety Summary .............................................................................................................. 195
Safety Terms and Symbols in This Manual................................................................................... 195
Index
MDO4000 Series Oscilloscopes User Manual iii

Table of Contents
iv MDO4000 Series Oscilloscopes User Manual

General Safety Summary
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
To Avoid Fire or Personal Injury
Use proper power cord. Use only the power cord specified for this product and certified for the country of use.
Connect and disconnect properly. Do not connect or disconnect probes or test leads while they are connected
to a voltage source.
Connect and disconnect properly. De-energize the circuit under test before connecting or disconnecting the current
probe.
Ground the product. This product is grounded through the grounding conductor of the power cord. To avoid electric
shock, the grounding conductor must be connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings and markings on the product. Consult the
product manual for further ratings information before making connections to the product.
Connect the probe reference lead to earth ground only.
Do not apply a potential to any terminal, including the common terminal, that exceeds the maximum rating of that terminal.
Power disconnect. The power cord disconnects the product from the power source. Do not block the power cord; it
must remain accessible to the user at all times.
Do not operate without covers. Do not operate this product with covers or panels removed.
Do not operate with suspected failures. If you suspect that there is damage to this product, have it inspected by
qualified service personnel.
Avoid exposed circuitry. Do not touch exposed connections and components when power is present.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Provide proper ventilation. Refer to the manual’s installation instructions for details on installing the product so it has
proper ventilation.
MDO4000 Series Oscilloscopes User Manual v

General Safety Summary
Terms in This Manual
These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in damage to this product or other property.
Symbols and Terms on the Product
These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read the marking.
WARNING indicates an injury hazard not immediately accessible as you read the marking.
CAUTION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
vi MDO4000 Series Oscilloscopes User Manual

Compliance Information
Compliance Information
This section lists the EMC (electromagnetic compliance), safety, and environmental standards with which the instrument
complies.
EMC Compliance
EC Declaration of Conformity – EMC
Meets intent of Directive 2004/108/EC for Electromagnetic Compatibility. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European Communities:
EN 61326-1:2006, EN 61326-2-1:2006. EMC requirements for electrical equipment for measurement, control, and
laboratoryuse.1234
CISPR 11:2003. Radiated and conducted emissions, Group 1, Class A
IEC 61000-4-2:2001. Electrostatic discharge immunity
IEC 61000-4-3:2002. RF electromagnetic field immunity 5
IEC 61000-4-4:2004. Electrical fast transient/burst immunity
IEC 61000-4-5:2001. Power line surge immunity
IEC 61000-4-6:2003. Conducted RF immunity 6
IEC 61000-4-11:2004. Voltage dips and interruptions immunity 7
EN 61000-3-2:2006. AC power line harmonic emissions
EN 61000-3-3:1995. Voltage changes, fluctuations, and flicker
European contact.
Tektronix UK, Ltd.
Western Peninsula
Western Road
Bracknell, RG12 1RF
United Kingdom
1This product is intended for use in nonresidential areas only. Use in residential areas may cause electromagnetic interference.
2Emissions which exceed the levels required by this standard may occur when this equipment is connected to a test object.
3To ensure compliance with the EMC standards listed here, high quality shielded interface cables should be used.
4Instrument rebooting may be experienced where the EUT takes longer than 10 seconds to recover from a transient immunity test.
5The instrument will exhibit ≤4.0 division waveform displacement and ≤8.0 division increase in peak-to-peak noise when subjected
to radiated interference per IEC 61000-4-3.
6The instrument will exhibit ≤1.0 division waveform displacement and ≤2.0 division increase in peak-to-peak noise when subjected
to conducted interference per IEC 61000-4-6.
7Performance Criterion C applied at the 70%/25 cycle Voltage-Dip and the 0%/250 cycle Voltage-Interruption test levels
(IEC 61000-4-11).
MDO4000 Series Oscilloscopes User Manual vii

Compliance Information
Australia / New Zealand Declaration of Conformity – EMC
Complies with the EMC provision of the Radiocommunications Act per the following standard, in accordance with ACMA:
CISPR 11:2003. Radiated and Conducted Emissions, Group 1, Class A, in accordance with EN 61326-1:2006 and
EN 61326-2-1:2006.
Australia / New Zealand contact.
Baker & McKenzie
Level 27, AMP Centre
50 Bridge Street
Sydney NSW 2000, Australia
Safety Compliance
EC Declaration of Conformity – Low Voltage
Compliance was demonstrated to the following specification as listed in the Official Journal of the European Communities:
Low Voltage Directive 2006/95/EC.
EN 61010-1: 2001. Safety requirements for electrical equipment for measurement control and laboratory use.
U.S. Nationally Recognized Testing Laboratory Listing
UL 61010-1:2004, 2nd Edition. Standard for electrical measuring and test equipment.
Canadian Certification
CAN/CSA-C22.2 No. 61010-1:2004. Safety requirements for electrical equipment for measurement, control, and
laboratory use. Part 1.
Additional Compliances
IEC 61010-1: 2001. Safety requirements for electrical equipment for measurement, control, and laboratory use.
Equipment Type
Test and measuring equipment.
Safety Class
Class 1 – grounded product.
viii MDO4000 Series Oscilloscopes User Manual

Compliance Information
Pollution Degree Description
A measure of the contaminants that could occur in the environment around and within a product. Typically the internal
environment inside a product is considered to be the same as the external. Products should be used only in the environment
for which they are rated.
Pollution Degree 1. No pollution or only dry, nonconductive pollution occurs. Products in this category are generally
encapsulated, hermetically sealed, or located in clean rooms.
Pollution Degree 2. Normally only dry, nonconductive pollution occurs. Occasionally a temporary conductivity that is
caused by condensation must be expected. This location is a typical office/home environment. Temporary condensation
occurs only when the product is out of service.
Pollution Degree 3. Conductive pollution, or dry, nonconductive pollution that becomes conductive due to condensation.
These are sheltered locations where neither temperature nor humidity is controlled. The area is protected from direct
sunshine, rain, or direct wind.
Pollution Degree 4. Pollution that generates persistent conductivity through conductive dust, rain, or snow. Typical
outdoor locations.
Pollution Degree
Pollution Degree 2 (as defined in IEC 61010-1). Note: Rated for indoor use only.
Installation (Overvoltage) Category Descriptions
Terminals on this product may have different installation (overvoltage) category designations. The installation categories are:
Measurement Category IV. For measurements performed at the source of low-voltage installation.
Measurement Category III. For measurements performed in the building installation.
Measurement Category II. For measurements performed on circuits directly connected to the low-voltage installation.
Measurement Category I. For measurements performed on circuits not directly connected to MAINS.
Overvoltage Category
Overvoltage Category II (as defined in IEC 61010-1).
Environmental Considerations
This section provides information about the environmental impact of the product.
Product End-of-Life Handling
Observe the following guidelines when recycling an instrument or component:
Equipment recycling. Production of this equipment required the extraction and use of natural resources. The equipment may
contain substances that could be harmful to the environment or human health if improperly handled at the product’s end of life. In
MDO4000 Series Oscilloscopes User Manual ix

Compliance Information
order to avoid release of such substances into the environment and to reduce the use of natural resources, we encourage you to
recycle this product in an appropriate system that will ensure that most of the materials are reused or recycled appropriately.
This symbol indicates that this product complies with the applicable European Union requirements according
to Directives 2002/96/EC and 2006/66/EC on waste electrical and electronic equipment (WEEE) and
batteries. For information about recycling options, check the Support/Service section of the Tektronix Web
site (www.tektronix.com).
Restriction of Hazardous Substances
This product has been classified as Monitoring and Control equipment, and is outside the scope of the 2002/95/EC RoHS
Directive.
xMDO4000 Series Oscilloscopes User Manual

Preface
Preface
This manual describes the installation and operation of the following oscilloscopes:
MDO4104-6 MDO4104-3 MDO4054-6 MDO4054-3
Key Features
MDO4000 Mixed Domain Oscilloscopes provide time-correlated acquisition of analog, digital, and RF signals in a single
instrument. They can help you verify, debug, and characterize electronic designs by providing views and measurements
in both the time and frequency domains simultaneously. Key features include:
A dedicated RF input channel for frequency domain measurements
16 digital channels and four analog channels for time domain measurements
Time-correlated acquisition of analog, digital, and RF signals in a single instrument
The ability to independently set acquisition parameters on the time and frequency domain channels
1 GHz and 500 MHz bandwidths
Sample rates up to 2.5 GS/s on all analog channels
20 M points record length on all channels
>50,000 waveforms/second display rate
Advanced triggering and analysis: I2C, SPI, USB 2.0, CAN, LIN, FlexRay, RS-232, RS-422, RS-485, UART, I2S, Left
Justified (LJ), Right Justified (RJ), TDM, Ethernet, MIL-STD-1553 (with the appropriate application module), and Parallel
Power analysis application module (optional)
ConventionsUsedinThisManual
The following icons are used throughout this manual.
Sequence Step Front panel power Connect power Network USB
MDO4000 Series Oscilloscopes User Manual xi

Preface
xii MDO4000 Series Oscilloscopes User Manual

Installation
Installation
Before Installation
Unpack the oscilloscope and check that you received all items listed as standard accessories. The following pages list
recommended accessories and probes, instrument options, and upgrades. Check the Tektronix Web site (www.tektronix.com)
for the most current information.
Standard accessories
Accessory Description
Tektronix part
number
English (Option L0) 071-2913-XX
French (Option L1) 071-2914-XX
Italian (Option L2) 071-2915-XX
German (Option L3) 071-2916-XX
Spanish (Option L4) 071-2917-XX
Japanese (Option L5) 071-2918-XX
Portuguese (Option L6) 071-2919-XX
Simplified Chinese (Option L7) 071-2920-XX
Traditional Chinese (Option L8) 071-2921-XX
Korean (Option L9) 071-2922-XX
MDO4000 Series Oscilloscopes User Manual
Russian (Option L10) 071-2923-XX
MDO4000 Series Oscilloscopes
Documentation Browser CD
Electronic versions of documents, including
the Programmer Manual and the Technical
Reference.
063-4367-XX
NI LabVIEW SignalExpress™, Tektronix
Edition and Tektronix OpenChoice Desktop
CD
Productivity, analysis, and documentation
software
063-3967-XX
Calibration certificate documenting
traceability to national metrology institute(s),
and ISO9001 quality system registration.
——
French (Option L1) 335-2376-XX
Italian (Option L2) 335-2377-XX
German (Option L3) 335-2378-XX
Spanish (Option L4) 335-2379-XX
Japanese (Option L5) 335-2380-XX
Portuguese (Option L6) 335-2381-XX
Simplified Chinese (Option L7) 335-2382-XX
Traditional Chinese (Option L8) 335-2383-XX
Korean (Option L9) 335-2384-XX
Front Panel Overlay
Russian (Option L10) 335-2385-XX
MDO4000 Series Oscilloscopes User Manual 1