TelcoBridges TMG3202 User manual

?
?
Two AC power cords
19” equipment rack
Items not included in this box that you will need:
In the box, you will find:
2
A) Install rack-mounting hardware on TMG3202
and install on equipment rack.
B) Connect Ethernet port to Linux Host.
3
4
Connect to VoIP network.
Power LED
Serial Port
TMG3202 AC Quick Installation Guide, 9010-00183-2A, Issue 3.2
TelcoBridges, On a Blade, System-Blade, TB-1+1 Solution, TB-16-E1/T1/J1, TB640-DS3, TB640-E1/T1/J1, TB640-OC3/STM-1, TB-8-E1/T1/J1, TB-IVR Mezzanine, TB-Multi-Blade, TB-Multi-Blade Mezzanine, TB-N+1-15 Solution,
TB-N+1-3 Solution, TB-StreamServer, TBVideo,TB-VoIP Mezzanine, TM-1000 Network Probe, Tmedia, TMP6400, TMG3200, TMS1600, TMP800, TMG800 are trademarks of ridges Inc. All rights reserved 2009. All other
trademarks are property of their owners. Information subject to change without notice.
TelcoB
1
VoIP Ports 1& 2 (VoIP-1&2)
Reset Button
?
?
?
?
?
?
?
?
One TMG3202
One set of mounting brackets with screws
One DB-9 to RJ-45 adapter
SCSI Cables and Patch Panels, if applicable
Three RJ45 Ethernet Straight Cables (male-male)
One warranty sheet
One packing slip
One TMG3202 Quick Installation Guide
Ethernet Port
Linux Host
USB Port
Linux Host
*ETH VoIP *TMS
1
9
8
16151413121110
7
65
4
3
2
1211 22
*NOTE:
Ethernet ports (ETH-1&2), and
TMS ports (TMS-1&2) are
unused.

7
5
TelcoBridges, On a Blade, System-Blade, TB-1+1 Solution, TB-16-E1/T1/J1, TB640-DS3, TB640-E1/T1/J1, TB640-OC3/STM-1, TB-8-E1/T1/J1, TB-IVR Mezzanine, TB-Multi-Blade, TB-Multi-Blade Mezzanine, TB-N+1-15 Solution,
TB-N+1-3 Solution, TB-StreamServer, TBVideo,TB-VoIP Mezzanine, TM-1000 Network Probe, Tmedia, TMP6400, TMG3200, TMS1600, TMP800, TMG800 are trademarks of ridges Inc. All rights reserved 2009. All other
trademarks are property of their owners. Information subject to change without notice. 9020-000183-2A, Issue 3.1
TelcoB
?
?
RJ-48 Interface (T1/E1/J1)
SCSI Interface (T1/E1/J1), a patch panel is provided
Connect to PSTN Network, using one of the following options:
?
?
Dual BNC (DS3)
Optical Interface (OC3/STM-1)
A.
ETH VoIP TMS
1211 22
49-64
33-48
17-32
1-16
SCSI
ETH VoIP TMS
1
9
8
16151413121110
7
65
4
3
2
1211 22
RJ-48
ETH VoIP TMS
1211 22
BIT1
BIT2
APS MAIN
STM 1
ETH VoIP TMS
1211 22
RxTx
BIT1
BIT2
RxTxRxTx
321
DS3
A) Connect to two independent
power sources (if only one power source is used,
press the green button at the rear
of the unit to disable the audible alarm).
B) Verify Power LED = Solid Green
(Refer to Panel 3)
6
Audible
alarm
button
ETH VoIP TMS
1211 22
Power
switch
Power
socket
1
9
8
16151413121110
765432
Connect to the Linux host through management Ethernet OR serial connector. The IP address
of the management port is assigned through DHCP. If DHCP is not available, use the serial
cable to connect to the TMG Linux Host for the first time.
Default HOSTNAME is the Linux Host serial number, which can be found in the packing slip.
Refer to the "Read Me" sheet for the username and password to log onto the Linux OS.
Navigate to: HTTP://HOSTNAME:12358, to configure the Tmedia unit.
(username/password: root/root)
B.
C.
More information is available on the TelcoBridges TB Wiki at:
http://docs.telcobridges.com/mediawiki/index.php/TMG3200
Next Steps?
TMG3202 AC Quick Installation Guide, 9010-00183-2A, Issue 3.2