Teledyne Lecroy WaveSurfer 510 User manual

Assembly Instructions
WaveRunner 8000/WaveSurfer 510 Rack Mount Accessory
Thank you for purchasing a Teledyne LeCroy rack mount accessory for the WaveRunner 8000 or WaveSurfer 510 oscilloscope.
Please review these instructions before installing the rack mount.
Parts
The rack mount kit is shipped with the following parts. Contact us if parts are missing.
Parts QTY
Mounting brackets with attached handles 2
M4x20 flat-head Phillips screws (for brackets) 4
Note: The kit does not include the fasteners needed to attach the rack mount to your equipment rack.
Consult your rack manufacturer regarding the appropriate type, size, and number of fasteners to install the
rack mount securely.
Tools
You will need a Phillips-head screwdriver to attach the rack mount to the oscilloscope.
Dimensions
Weight of instrument, uninstalled:22.8 lbs [10.3 kg]
Weight of rack mount, uninstalled:2 lbs [0.9 kg]
Width, installed: 479 mm Depth, installed: 307 mm
928852-00 Rev A 1

Assembly Instructions
Installation
1. Position the left bracket so that the screw holes align with the two holes on the side of the oscilloscope.
The handle should be facing toward the front of the unit.
Note: The left and right brackets are not interchangeable. The holes should only line up correctly with the
handles facing forward.
2. Use two of the M4x20 screws included with the rack mount kit to attach the left bracket to the
oscilloscope body.
3. Install the right bracket in the same manner as the left.
4. With the brackets securely fastened to the unit, install the oscilloscope into a rack following the
manufacturer's specifications.
CAUTION. This rack mount kit has been designed to fit standard 19-inch rack cabinets per
EIA/ECA 310-E. It has been designed for heated air exhaust through vents on the left and right
sides of the instrument. Some rack cabinets might present unusual obstacles that can block
exhaust vents. If you observe such obstacles, please contact TeledyneLeCroy technical staff
for further guidance.
© 2017 Teledyne LeCroy, Inc. All rights reserved.
WaveRunner, WaveSurfer and Teledyne LeCroy are trademarks of Teledyne LeCroy, Inc. Other product or brand names are trademarks or
requested trademarks of their respective holders. Information in this publication supersedes all earlier versions. Specifications are subject to
change without notice.
September, 2017
928852-00 Rev A 2