Tenda i9 User manual

1
Wireless Access Point i9
User Guide

I
Copyright Statement
© 2018 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other
brand and product names mentioned herein are trademarks or registered trademarks of their
respective holders. Copyright of the whole product as integration, including its accessories and
software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
in any form or by any means without the prior written permission of Shenzhen Tenda Technology
Co., Ltd.
Disclaimer
Pictures, images and product specifications herein are for references only. To improve internal
design, operational function, and/or reliability, Tenda reserves the right to make changes to the
products without obligation to notify any person or organization of such revisions or changes.
Tenda does not assume any liability that may occur due to the use or application of the product
described herein. Every effort has been made in the preparation of this document to ensure
accuracy of the contents, but all statements, information and recommendations in this document
do not constitute a warranty of any kind, express or implied.

II
Preface
Thank you for choosing Tenda! Please read this user guide before you start with i9.
Conventions
The typographical elements that may be found in this document are defined as follows.
Item
Presentation
Example
Cascading menus
>
System > Live Users
Parameter and value
Bold
Set User Name to Tom.
Variable
Italic
Format: XX:XX:XX:XX:XX:XX
UI control
Bold
On the Policy page, click the OK button.
Message
“ ”
The “Success” message appears.
The symbols that may be found in this document are defined as follows.
Symbol
Meaning
This format is used to highlight information of importance or special interest.
Ignoring this type of note may result in ineffective configurations, loss of data or
damage to device.
This format is used to highlight a procedure that will save time or resources.
Acronyms and abbreviations
Acronym or Abbreviation
Full Spelling
AP
Access Point
AC
Access Point Controller
SSID
Service Set Identifier
DHCP
Dynamic Host Configuration Protocol
DNS
Domain Name System
ISP
Internet Service Provider
AES
Advanced Encryption Standard
VLAN
Virtual Local Area Network
TKIP
Temporal Key Integrity Protocol

III
Acronym or Abbreviation
Full Spelling
PoE
Power Over Ethernet
WEP
Wired Equivalent Privacy
Additional information
For more information, search this product model on our website at http://www.tendacn.com.
Technical support
If you need more help, contact us by any of the following means. We will be glad to assist you as
soon as possible.
Hotline
Global: (86) 755-27657180
Email
[email protected]
Canada: 1-888-998-8966
Hong Kong: 00852-81931998
Website
http://www.tendacn.com
Skype
tendasz

IV
Contents
1 Getting to know your device.............................................................................................................1
1.1 Overview ................................................................................................................................1
1.2 Appearance ............................................................................................................................1
1.2.1 LED indicator ...............................................................................................................1
1.2.2 Button and port...........................................................................................................2
1.2.3 Label............................................................................................................................2
2 Application scenarios ........................................................................................................................4
2.1 Small scale WiFi network deployment...................................................................................4
2.1.1 Deploying the AP with a Tenda router with the AP controller capacity .....................4
2.1.2 Deploying the AP with a router without the AP controller capacity ..........................5
2.2 Large scale WiFi network deployment...................................................................................6
3 Login..................................................................................................................................................7
3.1 Logging in to the web UI of the AP ........................................................................................7
3.2 Logging out of the web UI of the AP......................................................................................9
3.3 Web UI layout.........................................................................................................................9
3.4 Common buttons on the web UI..........................................................................................10
4 Quick Setup .....................................................................................................................................11
4.1 Overview ..............................................................................................................................11
4.2 Configuring AP mode ...........................................................................................................13
4.3 Configuring Client+AP mode................................................................................................14
5 Status...............................................................................................................................................16
5.1 System Status .......................................................................................................................16
5.2 Wireless Status.....................................................................................................................18
5.3 Traffic Statistics.....................................................................................................................19
5.4 Wireless Clients....................................................................................................................20
6 Network settings .............................................................................................................................21
6.1 LAN setup .............................................................................................................................21

V
6.1.1 IP address obtaining mode –static IP address..........................................................22
6.1.2 IP address obtaining mode –dynamic IP address.....................................................23
6.2 DHCP server .........................................................................................................................25
6.2.1 Overview ...................................................................................................................25
6.2.2 Configuring the DHCP server ....................................................................................25
6.2.3 DHCP clients..............................................................................................................27
7 Wireless Settings.............................................................................................................................28
7.1 Basic settings........................................................................................................................28
7.1.1 Overview ...................................................................................................................28
7.1.2 Changing the SSID setup ...........................................................................................30
7.1.3 Examples of configuring SSID setup..........................................................................35
7.2 RF Settings............................................................................................................................55
7.2.1 Overview ...................................................................................................................55
7.2.2 Changing the RF settings...........................................................................................55
7.3 Channel Scan........................................................................................................................58
7.3.1 Overview ...................................................................................................................58
7.3.2 Checking the usage of channels................................................................................58
7.4 WMM Setup.........................................................................................................................59
7.4.1 Overview ...................................................................................................................59
7.4.2 Changing the WMM settings ....................................................................................60
7.5 Advanced..............................................................................................................................62
7.5.1 Overview ...................................................................................................................62
7.5.2 Changing the advanced settings ...............................................................................62
7.6 Access Control......................................................................................................................65
7.6.1 Overview ...................................................................................................................65
7.6.2 Configuring access control ........................................................................................65
7.6.3 Example of configuring access control......................................................................66
7.7 QVLAN Settings ....................................................................................................................68
7.7.1 Overview ...................................................................................................................68
7.7.2 Configuring the QVLAN function...............................................................................68

VI
7.7.3 Example of configuring QVLAN settings....................................................................69
8 SNMP...............................................................................................................................................72
8.1 Overview ..............................................................................................................................72
8.1.1 SNMP management framework................................................................................72
8.1.2 Basic SNMP operations .............................................................................................72
8.1.3 SNMP protocol version .............................................................................................73
8.1.4 MIB introduction.......................................................................................................73
8.2 Configuring the SNMP function ...........................................................................................74
8.3 Example of configuring the SNMP function.........................................................................75
Networking requirement ...................................................................................................75
Configuration procedure....................................................................................................75
Verification.........................................................................................................................76
9 Tools ................................................................................................................................................77
9.1 Firmware Upgrade ...............................................................................................................77
9.2 Time & Day...........................................................................................................................78
9.2.1 System Time..............................................................................................................78
9.2.2 Login Timeout ...........................................................................................................80
9.3 Logs ......................................................................................................................................81
9.3.1 View Logs ..................................................................................................................81
9.3.2 Log settings ...............................................................................................................82
9.4 Configuration........................................................................................................................85
9.4.1 Backup & Restore......................................................................................................85
9.4.2 Restoring the Factory Settings ..................................................................................85
9.5 Account ................................................................................................................................87
9.6 Diagnostics Tool....................................................................................................................88
9.7 Device Reboot ......................................................................................................................90
9.7.1 Manual Reboot..........................................................................................................90
9.7.2 Automatic Reboot .....................................................................................................90
9.8 LED Control...........................................................................................................................92

1
1 Getting to know your device
1.1 Overview
Tenda i9 is a wireless access point specially designed for offices, bars, coffee shops and other
indoor environments. Working at 2.4 GHz band, it provides a wireless transmission rate of as high
as 300 Mbps. Featured with 2 built-in high gain omni-directional MIMO antennas, i9 provides
powerful WiFi signal with strong wall penetration capacity and broad WiFi coverage. Compliant
with IEEE 802.3af standard, i9 allows you to apply long-distance power supply via PoE without
changing your original power network. All of this makes i9 an ideal choice for WiFi coverage.
1.2 Appearance
1.2.1 LED indicator
LED Indicator
Status
Description
System indicator
Solid on
The system is starting or faulty.
Blinking
The system is working properly.
Off
The system is powered off or the LED indicator is turned off.
System indicator

2
1.2.2 Button and port
Button & Port
Connection Description
LAN port
10/100 Mbps auto negotiation port
If the AP is powered using a DC adapter, connect this port to a switch.
If the AP is powered through PoE, connect this port to an IEEE 802.3af PoE
switch.
Power jack
The power jack is used to connect to a DC adapter for supplying power to the AP.
Input: 12 V 1 A
Reset button
After the AP is powered on, you can hold down this button for about 8 seconds to
restore the factory settings.
1.2.3 Label
The label is located on the rear panel of the AP. For details of the label, see the following figure.
Reset button
Power jack
LAN port
Position of the label
(1)
(3)
(4)
(5)
(6)
(2)
(4)

3
(1): Name of the AP.
(2): Model of the AP.
(3): Default IP address of the AP. You can use this IP address to log in to the web UI of the AP.
(4): Default user name and password of the web UI of the AP.
(5): MAC address of the AP. The default primary SSID of the AP is Tenda_XXXXXX, where XXXXXX
indicates the last 6 characters of this MAC address.
(6): Serial number of the AP. If the AP is faulty, you need to provide this serial number when
sending the AP for repair.