Terasic OpenVINO User manual

OSK-GT
GT Edition
OpenVINO Starter Kit
SK-GT install to PCIe slot of PC
O
Insert the OSK-GT into the PCIe slot of the PC
and lock the board.
(Make sure PC is Power off)
For further discussion, support, and resources, please go to:
http://osk.terasic.com
osk.terasic.com
CPT-3359-00

Directory Name
UserManual
Demonstrations
Datasheet
Schematic
Tools
Contents
Contains the OSK-GT documentations
Contains design examples for OSK-GT application
Contains the datasheets of the components on OSK-GT
OpenVINO 2019R1 Package Contains the OpenVINO examples and related documentations for OSK-GT
Contains the schematic of OSK-GT
Contains the design and testing tools for OSK-GT
OSK-GT
1. Connect the power adapter to the power jack of the OSK-GT Board.
2. Switch SW4 to ON position.
3. All User LEDs will be flashing and the 7-segment displays will be counting from "00".
Contents of OSK-GT Board System CD
0101
02
02
03
03
04
04
05
05
06
06
07
07
08
08
OSK-GT Development Board
OSK-GT Quick Start Guide
Fan (Installed)
USB to miniUSB Cable
AC Power Cord
Power Adapter
PCIe Bracket (Installed)
Screws and Silicon Footstands Package
OSK-GT System CD Contents

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Terasic:
P0616