Terasic OpenVINO User manual

1
Cyclone V FPGA Board
FPGA Board 12V DC Jack
FPGA Board Power Switch
FPGA USB Blaster Port
PC System
PC 5V DC Jack
PC Power Button
PC USB Port
PCIe Slot to M2 Socket Adapter
Quick Start Guide
OSKS
Quick Start Guide
OpenVINO Starter Kit Set
osks.terasic.com

0101
02
02
03
03
04
04
05
05
OpenVINO Starter Kit Set
USB 3.0 Cable (installed)
12V Power Supply (for FPGA Board)
Mini USB Cable (installed)
5V Power Supply (for PC system)
0101 02
02
03
03 04
04 05
05
Connect a Keyboard, a Mouse, and a HDMI monitor to the PC system.
0101
Make sure the Mini USB Cable is still securely connected to the OpenVINO Starter Kit and the
PC system for the USB-Blaster programming.
0202
Make sure the USB 3.0 Cable is also securely connected to the OpenVINO Starter Kit and the
PC system for PCIe Link.
0303
www.terasic.com
P
2ower On Test
W
1hat’s in the box?

Connect the DC 12V power to the OpenVINO Starter Kit (FPGA System).
0404
Power on the OpenVINO Starter Kit.
0505
Connect the DC 5V power to the PC, then the PC wil be powered on directly.
0606
After the Linux Desktop is displayed on the monitor, double click the batch file
"Power On Test.sh" on the desktop.
0707
When the message "Do you want to install..." appears on the Terminal, enter "y",
then press ENTER key on the keyboard.
0808
DC 12V Power Adaptor
DC 5V Power Adaptor
Note: Please do NOT connect DC 12V power to the PC system or it will be
damaged permanently.
Quick Start Guide
OSKS

Users can download the System CD from the link below:
http://osks.terasic.com/cd
For further discussion, support, and resources, please go to:
http://osks.terasic.com
The car license number recognition demo will be executed, as shown in the picture below,
to indicate the Power On Test is successful.
0909
If you encounter any problem, please contact us below:
Email: [email protected] Tel: [phone]
www.terasic.com
CPT-3350-01
C
3ontents of OSKS Board System CD
etting Help
G
4