Texas Instruments SimpleLink CC2650STK User manual

Thank you for purchasing the TI
SimpleLink™ Multi-Standard SensorTag
Development Kit
Getting started
Download the SensorTag app from the
Apple App Store or Google Play.
1
Download on the GET IT ON
Pull the tab on the SensorTag battery to power
on.
2
Model Name: CC2650STK
FCC ID: R5DCC2650
IC: 22682-CC2650

Caution! Dispose of the battery properly and keep out
of reach of children. If swallowed, contact a physician
immediately.
Within the app select your SensorTag from the
device list, then select “Sensor View” to see the
sensor’s readings.
3
For more information about SensorTag, visit:
www.ti.com/sensortag
For technical support, visit the TI E2E™ community:
www.ti.com/lprf-forum
Battery information: Perchlorate material – Special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
SWRU410

Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generate, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Industry Canada (IC)
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Cet appareil est conforme à la norme RSS d'Industrie Canada. Son fonctionnementestsujet aux deux conditions suivantes:
(1) ledispositif ne doit pas produire de brouillagepréjudiciable, et
(2) cedispositifdoit accepter tout brouillagereçu, y compris un brouillage susceptible de provoquer un
fonctionnementindésirable.