Theben TC 649 C User manual

2021-06-30_310547
Manual for
TC 649 C
Version 1

TC 649 E manual
Contents
1Introduction 3
1.1 TC 649 C control box 3
1.2 Information about the web interface 4
1.3 Main functions 5
1.4 Housing 5
2Start-up 7
3Connecting TC 649 C to the network 8
3.1 Start-up via the hostname 9
3.2 Start-up via the service interface in order to read out the
IP address 11
3.3 Start-up via the service interface in order to assign the
IP address statically 13
4Theben cloud (TC 649 C remote control) 15
4.1 Setting up a Theben cloud account 15
4.2 Connecting the TC 649 C to the Theben cloud 15
4.3 Managing the TC 649 C via the Theben cloud 16
4.4 User administration in the Theben cloud 17
5Navigation 19
6Controls and menu 20
6.1 Start 20
6.2 Settings 21
6.3 Control 26
6.4 Info 31
6.5 Log out 31
6.6 Password forgotten 31
6.7 Switching language 32
7Appendix 33
7.1 Default settings 33
7.2 Troubleshooting 33
7.3 Specifications 34
7.4 Glossary 35
7.5 Use of open source software 35
8Contact 36

Introduction
TC 649 C manual 3
1Introduction
1.1 TC 649 C control box
The TC 649 C control box is operated using an administration and configuration
tool (web interface). The control box can be used to send time switch and astro
programs via LAN or WAN. It is installed in the network via an integrated web
server.
The control box is integrated into the company network. The control box must
have an Internet connection so that it can be addressed via the Theben cloud.
You can use simple functions with the control box, such as astronomically
controlled lighting, time-controlled access points and temperature reduction for
heating units during the day and at night.
Central control
via LAN
DHCP / IP
Central control
via LAN

Introduction
TC 649 C manual 4
1.2 Information about the web interface
The web interface for the TC 649 C control box can be called up on a desktop PC
or a mobile end device such as a tablet or smartphone.
The following browsers / operating systems are supported:
•Browsers:
oGoogle Chrome from version 69 onwards
•Operating systems:
oMicrosoft Windows
oApple iOS from version 10 onwards
oGoogle Android from version 7 onwards

Introduction
TC 649 C manual 5
1.3 Main functions
Feature
Meaning
NTP server Using the NTP server with the TC 649
C ensures switching accuracy to the
second across the globe.
Standalone operation The TC 649 C is operated as a single
device without any external software.
Administration via web interface The TC 649 C can be easily configured
via the web.
Updating firmware Firmware can be easily updated via
the web interface.
1.4 Housing
1.4.1 Top
Name
Status
Meaning
Web server
Off The web server for the web interface is
switched off.
On The web server for the web interface is
switched on.
Flashing The web server for the web interface is
starting up.

Introduction
TC 649 C manual 6
Time
Off
The NTP service is deactivated.
On
The NTP service is activated and a
connection has been established to an NTP
server.
Flashing The NTP service is activated and the device is
searching for a connection to the NTP server.
Relay
Off
All relays are switched off.
On
One or more relays are switched on.
PWR/TLS
Off
The TC 649 C is switched off.
Flashing
The TC 649 C is switched on.
1.4.2 Front
The socket for the power supply, both network interfaces (Service, Ethernet) and
the socket for relays C1 and C3 are located on the front of the device.
1.4.3 Back
The socket for relays C2 and C4 is located on the back of the device.
Mains voltage

Start-up
TC 649 C manual 7
2Start-up
Please refer to the enclosed installation and operating instructions for
information on how to connect the device and carry out initial operation.

Connecting TC 649 C to the network
TC 649 C manual 8
3Connecting TC 649 C to the network
Depending on which method you use, you will need one or two network cables
(RJ45) to connect the TC 649 C control box to the network.
Make sure the cabling is correct.
Connect the cables in accordance with the following sections.
There are three ways of carrying out the start-up process for the TC 649 C.
1. Start-up via the hostname (serial number)
2. Start-up via the service interface in order to read out the IP address
3. Start-up via the service interface in order to assign the IP address
statically
Two network cables are required for options 2 and 3.

Connecting TC 649 C to the network
TC 649 C manual 9
3.1 Start-up via the hostname
1. Plug the network cable (RJ45 connector) into the router.
2. Plug the other end of the network cable (RJ45 connector) into the (right-
hand) Ethernet socket on the TC 649 C.
3. Open the web browser (Google Chrome).
4. In the address field in the browser, enter the
serial number in the following format: http://serial-number.
You will find the serial number on the device. The serial number will
always start with DTHE.
5. If accessing the device via the serial number does not work, you can also
access it directly using the IP address. In the address field in the
browser, enter the
IP address (if known) in the following format: http://IPaddress.
6. The login screen will appear.
7. Enter admin as the user name.
Enter admin as the password.
Click on "Log in".
Your TC 649 C is connected to your network. The start-up process is now
complete.

Connecting TC 649 C to the network
TC 649 C manual 10
If you cannot reach the device via the serial number, it is probably because
your router is unable to resolve the serial number. You can use the user
interface of your router to display all connected devices and their IP
addresses. Please refer to your router manual to see exactly how to do
this.
If accessing the device via the serial number does not work, you do not
know the IP address or you cannot find out the address via your router,
please continue with Section 3.2 in order to find out the IP address of your
TC 649 C.

Connecting TC 649 C to the network
TC 649 C manual 11
3.2 Start-up via the service interface in order to read out the IP
address
You will need two network cables (RJ45 connector) for this type of start-up.
1. Disconnect the TC 649 C from the power supply.
2. Plug network cable 1 into the router.
3. Plug the other end of network cable 1 into the (right-hand) Ethernet socket
on the TC 649 C.
4. Plug network cable 2 into the network socket on your PC.
5. Plug the other end of network cable 2 into the (left-hand) Service socket on
the TC 649 C.
6. Connect the TC 649 C to the power supply.
7. Open the web browser (Google Chrome).
8. Open the web browser and open the following page in the address field:
9. http://192.168.138.3
10. The login screen will appear.
11. Enter admin as the user name.
Enter admin as the password.
Click on "Log in"
12. Read out the IP address of your TC 649 C via Settings Network settings
IP address.
13. Remove the network cable from the service interface of the TC 649 C.
14. Now connect your PC to your home network again via WiFi or LAN.

Connecting TC 649 C to the network
TC 649 C manual 12
15. Open the web browser (Google Chrome).
16. In the address field in the browser, enter the IP address that you read out in
point 12 in the following format: http://IPaddress.
17. The login screen will appear.
Your TC 649 C is connected to your network. The start-up process is now
complete.
If you still cannot access the TC 649 C device, check the proxy settings and
contact the system administrator if necessary.

Connecting TC 649 C to the network
TC 649 C manual 13
3.3 Start-up via the service interface in order to assign the IP address
statically
You will need two network cables (RJ45 connector) for this type of start-up.
1. Disconnect the TC 649 C from the power supply.
2. Plug network cable 1 into the router.
3. Plug the other end of network cable 1 into the (right-hand) Ethernet socket
on the TC 649 C.
4. Plug network cable 2 into the network socket on your PC.
5. Plug the other end of network cable 2 into the (left-hand) Service socket on
the TC 649 C.
6. Connect the TC 649 C to the power supply.
7. Open the web browser (Google Chrome).
8. Open the web browser and open the following page in the address field:
9. http://192.168.138.3
10. The login screen will appear.
11. Enter admin as the user name.
Enter admin as the password.
Click on "Log in".
12. Display the IP address of your TC 649 C via Settings Network settings 
IP address.
13. Untick "Use DHCP", use the pre-filled IP address or enter an IP address of
your choice.

Connecting TC 649 C to the network
TC 649 C manual 14
Note: Only use an IP address that is not being used by another device in
the network and that corresponds to your network.
14. Click on "Save" and wait until the settings have been saved.
15. Remove the network cable from the service interface of the TC 649 C.
16. Now connect your PC to your home network again via WiFi or LAN.
17. Open the web browser (Google Chrome).
18. In the address field in the browser, enter the IP address that you assigned in
point 15 in the following format: http://IPaddress.
19. The login screen will appear.
Your TC 649 C is connected to your network. The start-up process is now
complete.
If you still cannot access the TC 649 C device, check the proxy settings and
contact the system administrator if necessary.

Theben cloud (TC 649 C remote control)
TC 649 C manual 15
4Theben cloud (TC 649 C remote control)
4.1 Setting up a Theben cloud account
If you would like to connect your TC 649 C to the Theben cloud, you will need a
Theben cloud account.
To create a Theben cloud account, please go to:
https://cloud.theben.de
4.2 Connecting the TC 649 C to the Theben cloud
If the TC 649 C has not been connected to the Theben cloud, it will not appear online
under https://cloud.theben.de.
To connect your TC 649 C to the Theben cloud, first make sure that your TC 649 C is
connected to the Internet.
Open the user interface of your TC 649 C. Go to Settings -> Theben cloud.
Enter the login details for your Theben cloud account and click on "Connect to
Theben cloud". The process can take up to 90 seconds.

Theben cloud (TC 649 C remote control)
TC 649 C manual 16
Your TC 649 C is now connected to the Theben cloud.
You can now manage your device via https://cloud.theben.de.
4.3 Managing the TC 649 C via the Theben cloud
Open https://cloud.theben.de and log in.
Via the "Gateways" menu item, open the list of devices that are linked to your
account (TC 649 C).
4.3.1 Management and remote control
-Select the TC 649 C that you want to manage and go to "Manage".
-The connection to the TC 649 C will be established. The Navigation and
Control and Menusections explain how to control the TC 649 C.

Theben cloud (TC 649 C remote control)
TC 649 C manual 17
4.3.2 Renaming
-Select the TC 649 C that you want to rename and go to "Edit".
-Change the name of your TC 649 C.
-Click on "Save".
4.3.3 Transferring
-Select the TC 649 C that you want to transfer to a different owner and
go to "Transfer".
-Select the user to whom you wish to transfer the ownership rights.
-Click on "OK".
If there are no users in the list, you will need to invite a user first. Further
information can be found below.
4.4 User administration in the Theben cloud
Open https://cloud.theben.de and log in.
Via the "Users" menu item, open the list of devices that are linked to your
account and the available installations and their users and owners.
4.4.1 Adding users
-Under "Installations", select the TC 649 C to which you wish to add a
new user.
-Under "Invitation", enter the e-mail address of the new user.
-Click on "Send".
-The user will receive an invitation via e-mail.
-As soon as they accept the invitation, they will also be able to manage
the selected TC 649 C.

Theben cloud (TC 649 C remote control)
TC 649 C manual 18
4.4.2 Deleting users
You can only delete users if you are registered as the owner.
-Under "Installations", select the TC 649 C whose user you wish to delete.
-Under "Users", you will see all users of your TC 649 C.
-Select the user and click on "Revoke".
-The user will no longer have access to your TC 649 C.

Navigation
TC 649 C manual 19
5Navigation
The main way to navigate around the user interface is via the menu bar at the
top of the screen. You can access all the TC 649 C settings via this navigation
bar.
Menu items marked with a contain sub-menu items which can be called up
with a single click.

Controls and menu
TC 649 C manual 20
6Controls and menu
To navigate around the main menu, click on the required main menu item.
If the main menu item contains sub-menu items, a drop-down menu will open.
You can then click on the sub-menu item you want.
6.1 Start
Detailed device information is displayed on the start page.
This information cannot be changed here. To change the settings, use the
corresponding menu items under Settings or Control.