Thermo King VCP2 User manual

$ODUPV
Incaseof KLJKRUORZSUHVVXUH intherefrigerationsystem,HPCO
or LPCO will be shown on the display as alarm code. The
compressor and condenser fans are stopped automatically.
To restart turn the system off by pressing key (11) for 5 sec. Than
press key (11) again to restart.
$WWHQWLRQ If the alarm comes up again don’t restart. See the
nearest dealer for service.
$ODUPFRGHVIfanycomponentofthesystemisnotworking,press
the keys (1) and (2) together to read the alarm code. The display
will show an alarm code if there is an active alarm or it will show
NO ERROR.
1RWH In case of a component failure. The system will operate all
other function as adjusted. Except the failed component.
:DUUDQW\,QVWUXFWLRQV
Should you require warranty service during the warranty period,
simply present your copy of the Warranty Certificate at any of the
dealer locations shown in the Thermo King Service Directory.
Terms of the complete Thermo King Corporation Warranty are
available on request.
&RQWUROOHU
2SHUDWRU·V
0DQXDO
&RQWURO3DQHO'HVFULSWLRQV
2SHUDWLQJ,QVWUXFWLRQV
.H\V,QGH[
$ODUPV
&$87,217KLVLVDGULYHU·VUHIHUHQFHJXLGH
,IIXUWKHULQIRUPDWLRQLVUHTXLUHG FRQVXOW\RXU
7KHUPR.LQJVHUYLFHGLUHFWRU\IRUWKHORFDWLRQ
DQG SKRQHRIWKHORFDOGHDOHU
BCA022
TK 51706-3-PC © Thermo King Corporation

BCA023
*(1(5$/
&RQWUDVWDGMXVWPHQWGLVSOD\
Press (8) and use the arrows (1, 2) to adjust the contrast.
6HWWLPHDQGGDWH
Press (16) once, the display will show “SET TIME”.
Set minutes: Press (16) again and use the arrows.
Set hours: Press (16) for the third time and use the arrows.
Set date: Press (16) for the fourth time and use the arrows.
35(+($7(5
6HWWLQJWKHWLPHDQGGDWHIRUVWDUWLQJWKHSUHKHDWHU
Press (15) once, the display will show “PRE HEATER ON”
Set minutes: Press (16) again and use the arrows.
Set hours: Press (16) for the third time and use the arrows.
Set date: Press (16) for the fourth time and use the arrows.
Press (15) again, the display will show “PRE HEATER OFF”
)5217+($7(523(5$7,21
$LUWHPSHUDWXUHPress (4) and use the arrows (1, 2) to set
the percentage of your choice.
%ORZHUVSHHG Press (3) and use the arrows to set the
blower speed.
5HFLUFXODWLRQDLU Press (12), the display will show “FR
RECIRC ON”. Press (12) again, the display will show “FR
RECIRC OFF”.
'HIURVWIURQWZLQGRZ Press (5), the display will show
“xx DEFROST ON”. Press (5) again, the display will show
“xx DEFROST OFF.
$LUGLVWULEXWLRQGULYHUFRXULHUIHHW Press (6) and use the
arrows to distribute the hot or cold air according to your
choice.
$&$LUFR Press (10), the display will show “FR AIRCO
ON”. Press (10) again, the display will show “FR AIRCO
OFF”.
,17(5,2523(5$7,21
Press (7) to FKDQJHFOLPDWHLQWKHLQWHULRU. The display will
show“PASSANGER”.TheLEDgoesonandyounowhave5
sec. to activate one of the function keys listed below.
After 5sec.ofinactiontheselectorkeywillswitchbackto the
driver position.
9HQWLODWLRQ Press (7) and then (3) within 5 sec. and then
use the arrows (1, 2) to regulate air quantity. The display will
show “P. BLOWER 100%”.
5HFLUFXODWLRQDLUPress (7) and then (12) within 5 sec. The
display will show “P. RECIRC ON”.
7HPSHUDWXUH Press (7) and then (4) within 5 sec. and use
the arrows to set interior temperature (17–26 °C). The
display will show “SET TEMP WW °C”(tt = temperature).
+HDWLQJPress (7) and then (9) within 5 sec. If the LED
is on, the heating is on. After 5 sec. “HEATING MODE”
appears in the display.
$&$LUFR Press (7) and then (10) within 5 sec. If theLED
is on, the A/C is on. After 5 sec. “AIRCO MODE”appears
in the display.
$XWRPDWLFRSHUDWLRQ Press (11), the interior temperature
will automatically be kept at the set value of your choice.
The display will show “AUTO ON”.
Press (11) for 5 sec., the control system will be WXUQHGRII.
If you press (11) again, the control system will be
UHDFWLYDWHG.
',63/$<
,QWHULRUWHPSHUDWXUHPress (13) to display the current
interior temperature.
([WHULRUWHPSHUDWXUH Press (14) to display the current
exterior temperature.
If the exterior temperature is lower than +3 °C, the red LED
starts burning as a warning about possibility of icy road.
.H\V,QGH[
(1) Higher value (9) Heating
(2) Lower value (10) A/C (Airco)
(3) Blower speed (11) Automatic operation
(4) Temperature (12) Recirculation
(5) Defrost front window (13) Interior temperature
(6) Air distribution (14) Exterior temperature
(7) Selector (interior) (15) Pre-heater
(8) Contrast adjustment (16) Time
&RQWURO 3DQHO 'HVFULSWLRQV
DQG 2SHUDWLQJ ,QVWUXFWLRQV