
Perfect Prep works with any brand of powdered formula milk, and has an adjustable base
for different bottle shapes and sizes –simply measure out the formula and the Perfect
Prep does everything else.
Water volume advice
As is normal with all manufactured products, the Tommee Tippee Perfect Prep
machine dispensed water volume has an allowed tolerance of +/- 5%
Additionally, there are potential tolerances in the measurement graduations of
Closer to Nature bottles
This means that any volume below 100 ml may vary by +/- 5 ml, and any volume
above 100 ml may vary by +/- 5%
It is therefore possible for the combination of both tolerances, machine and
bottle, to make the volume dispensed by the machine appear inaccurate
The Closer to Nature bottles meet or surpass the requirements for volume
tolerances as specified by European Standard EN 14350
Why choose Tommee Tippee?
Tommee Tippee is a brand of baby feeding accessories in the UK and a brand of infant
products and accessories in the global market. Loved by parents and children alike,
Tommee Tippee has received numerous brand accolades in the UK, including top ranks
in the Mother and Baby Awards, a head-to-head assessment of competitive products
voted by mothers themselves. Their most recent awards in 2012/2013 include the Closer
to Nature Digital Video and Sensor Pad Monitor and the Digital Ear Thermometer winning
Gold Practical Parenting and Pregnancy Awards.
Setting up and cleaning the Perfect Prep
Place a container (at least 1 litre capacity) under the dispenser outlet to capture
the water used to clean the system
Plug in the unit, at which point the tank empty warning light will illuminate
With water hopper in place (but not filter), fill with 1 litre of freshly boiled water
to the halfway mark
Wait for the tank empty warning light to go out; the water tank hot light will
illuminate
Press the cleaning mode button and hold for two seconds; the cleaning mode
light will illuminate
Wait while the boiled water is emptied from the tank, through the dispenser, and
into the container
The tank empty warning light will illuminate once the water has flushed through
the system
Discard the water captured in your container and replace it under the dispenser
Remove the water hopper and fit the filter; replace it in the water tank
Fill the hopper with cold water
Wait for the tank empty warning light to go out
Press the start/stop button; a red light will flash
The appliance will dispense an amount of hot water
Press the start/stop button again; a green light will flash and an amount of water
will be dispensed to finish the cycle
Discard the dispensed water, and your Perfect Prep system is now ready to use
Instructions on using the Perfect Prep filter
Remove the filter cartridge from the packaging
Remove the sticker from the top of the filter
Fill a bowl with potable (drinking) water
Fully submerge the cartridge in the water
Gently agitate until the bubbles cease