TOP VEHICLE TECH KWAUDI4 User manual

www.topvehicletech.com
The informaon provided in this document is subject to change without noce due to changes and/or
improvements to the product/s.
V1.0421
KWAUDI4
AUDI
2008-2015
2008-2015
INSTALLATION MANUAL
This dash image is a visual representaon for display purposes only.

2
www.topvehicletech.com

The KWAUDI4 installaon kit allows for the retenon of the vehicle’s steering wheel controls and maintains the
original aesthec of the interior when installing a new car stereo. The KWAUDI4 gives you everything you need
for a complete install in one box. The components of this kit are compable for the Audi A4 (8K) and Audi A5
(8TF) (2008-2015) with Amplied, Basic Non-MMI factory stereos. The wiring harness and Infodapter interface
will retain the steering wheel controls, factory phone buons and vehicle sengs. It also aids in generang
parking sensor graphics for the new stereo as well as providing an input for a reverse camera (if applicable).
Supplied with a Quadlock connector.


Installaons should be carried out by, or under the guidance of an experienced installer. If you do encounter any
problems during the installaon of this product, then please contact our dedicated customer service team at:
Phone: [phone] E-Mail: 

• 1x Fascia plate (with accessories)
• 1x Instrucon manual
• 1x Steering wheel control harness and Infodapter interface
• 1x Antenna adapter
• 1x DAB antenna adapter
• 1x Stereo patch lead

3
www.topvehicletech.com

1. Use a bojo tool to pry away and unclip the trim that surrounds the top screen display. When loose,
remove completely whilst disconnecng the hazard switch.
1. Open the passenger side door and proceed to pull away the door trim from the pillar.


2. Using a set of panel removal tools, begin to pry away the pillar casing.
4. The DAB antenna not only has a self adhesive backing, but also features a black earth sheet. When plac-
ing the DAB antenna, the earth sheet  be placed onto the metal part of the pillar. The antenna itself
must be located roughly 15cm from the top of the windscreen.


5. Once happy with the placement, take the 3m of wiring extension and feed it down through to the
stereo’s opening. With the wiring adjusted to the appropriate length, feel free to re-install the glovebox.
3. The glovebox will need to be dropped down to route the antennas wiring. To do this you will need to
remove 2x bolts located at underneath, 1x to the side, and 6x screws located within the glovebox itself.
Once free, simply leave in the footwell.

1. Aach the brackets to the new stereo using the screws within the kit. With the brackets aached, oer
the whole unit to the back of the fascia using the plasc inserts at the boom of both the brackets and
fascia as a guide.
2. Using the bojo tool again, pry away and loosen the climate control panel located at the boom of the
dashboard. Once out, disconnect the panel and put to one side.
3. Using a pick tool, disengage the spring clips located on the inside of the the fan blades. When done
correctly, you can remove these completely.
4. Undo the two bolts that hold the original radio in place. When undone, remove whilst disconnecng all
of the wiring.

Some plascs will need to be cut and removed from the dashboard to make space for the new car stereo.
Measure where the stereo will sit and take due care when modifying the vehicle. TopVehicleTech always promote the
help of professional installers. TopVehicleTech will not be held responsible for any damage to the vehicle.
2. When happy with the alignment, and the “Stereo Installaon” process is complete, simply put the unit
into place and rmly press on the edges of the fascia to ensure it clips into place.

4
www.topvehicletech.com
1. Take the Infodapter interface in hand and connect both the 12-way stereo patch lead and the 14-way
steering wheel harness connectors to the corresponding ports.
2. Connect the bullet connector from the stereo patch lead to the ‘steering wheel remote input’ on the
back of the new stereo.
5. Aach the antenna adapter to the vehicles pre-exisng connecon and the back of new stereo.

6. Connect the DAB antenna’s SMB connector to the back of the new stereo.
7. Aach the addional wiring on the harness to the back of the stereo:
- Speed Pulse  - Park Brake  - Reverse  - Mute
8. When all the above wires (and any addional accessories) have been connected, nally make the
connecons between the stereos ISO connecon and vehicles pre-exisng connector.

4. Aach the yellow male RCA connector to the reverse camera input of the stereo.
To add an aermarket reverse camera: aach the yellow female RCA from on the camera extension
harness to the male yellow RCA of the aermarket reverse camera.

On this parcular interface are a set of dipswitches. These dipswitches have the following properes:
1: OFF - Kenwood. ON - Pioneer.
2: OFF - NTSC reversing camera (default). ON - PAL reversing camera.
3: Change from OFF to ON to ‘reset’ screen seng to factory default.
Note: during this procedure, the screen background will change to red and no sengs adjustments can be made.
4: Not Used.
3. Aach the 4-pin camera extension harness to the relevant port on the Infodapter interface.

5
www.topvehicletech.com
Conguraon Menu
Drive Select Sengs
Vehicle Sengs
Infodapter Sengs
Language
Version
Back
Please note: conguraon layout may dier dependent on vehicle model.

1
2
3
4
NAV
MODE
OK
1. Track + / Track -
Source (Short Press) /  (Long Press)
2. Source (Short Press) /  (Long Press)
3. Volume + / Volume -
4. Pick Up (Short Press)
Hang Up (Long Press)
1. Track + / Track -
Source (Short Press)
2. Mode
3. Volume + / Volume -
4. Speech
 

1. Menu + / Menu -
Select Menu Item (Short Press)
2. Select Menu Item (Short Press)
3. Volume + / Volume -
4. Pick Up (Short Press)
Hang Up (Long Press)


As well as steering wheel control funconality, this interface allows the retenon of key vehicle features
and funcons via a bespoke ‘Infodapter’. Accessing the Infodapter, you are able to navigate through the
following opons and sengs:

Within the ‘Drive Select Sengs’ menu, you are able to
select the desired drive mode from the list below:
• Individual
• Comfort
• Auto
• Dynamic
• O Road
• Eciency

6
www.topvehicletech.com

Within ‘Vehicle Sengs’ you are able to alter a whole range of features that would have originally been
lost if not for the Infodapter. A list of features and funcons you will nd are*:
Unit Sengs Windows & Wipers Instrument Cluster
• Distance • Convenience Open Front • Engine Oil Level
• Speed • Convenience Open Rear • Oil Service
• Temperature • Wiper Service Posion • Service
• Tyre Pressure Units • Rain Sensors • Board Computer 1
- Fuel Range
Time/Date Lights - Average Consumpon
• Hours • Come Home Light Time - Current Consumpon
• Minutes • Leaving Home Lights - Average Speed
• Years • Auto Headlights - Driving Time
• Month • Dayme Running Lights - Distance Travelled
• Day • Headlamp Converter • Board Computer 2
• Set Time Format - Fuel Range
• Set Date Format - Average Consumpon
- Current Consumpon
Speed Central Locking - Average Speed
• Speed Warning • Unlock Single Door - Driving Time
• Speed Warning At • Auto Locking - Distance Travelled
• Suggested Gear Change • Boot Lid & Tailgate
Parking System
• Display
• Front Volume
• Front Frequency
• Rear Volume
• Rear Frequency

*Note: Although care has been taken to ensure the accuracy of this menu structure at the me
of prinng this document, sudden changes in soware by the manufacturer or incompabilies
with the interface cannot be accounted for. Do not consider this list to be exhausve.

Within ‘Infodapter Sengs’ you are able to alter a the look and feel of the Infodapters menu/display:
Screen Size/Posion Picture Sengs
• Horizontal Size • Brightness
• Horizontal Posion • Contrast
• Vercal Size • Saturaon
• Vercal Posion
Preferences
• Camera Connected - Choose the style of camera connected to the vehicle (if applicable).
• Park Brake Source - Set ‘Park Brake’ output to acvate when park brake is on (Brake), when speed is less
than 3km/h (Speed) or to remain on at all mes (Always On).
• Restore Factory Sengs - select ‘Yes’ to return all Infodapter sengs to factory defaults.

Within the ‘Language’ menu, you are able to select between a wide array of dialects. This is default to
English upon installaon.
Within ‘Version’, you are able to view the current rmware that is being ulised by the Infodapter.

7
www.topvehicletech.com

ISO Connector
Connect to aftermarket stereo
Quadlock Connector
Connect to quadlock connector from vehicle
Main Wiring Loom Connector [14 Pin]
Connect to Interface Box
Flying Wires
Pink - Speed Pulse
Green - Park Brake
Purple/White - Reverse Gear
Grey - Mute
Male Yellow RCA Connector
Connect to stereos camera input
Female Yellow RCA Connector
Connect to aftermarket camera
Stereo Patch Lead Connector [12 Pin]
Connect to Interface Box
Note: Must be connected first before power
connection is made to the interface
Stereo Patch Lead Bullet Connector
Connect to ‘Steering Wheel Remote Input’
on back of the stereo.

8
www.topvehicletech.com
If at any point you experience any problems and need any assistance before, during or aer the
installaon process, please contact us via :
Phone: [phone]
E-Mail: 
Mon - Fri 9am - 5.30pm GMT

If you would like to download a digital copy of this manual, or any other product, then please
visit the www.topvehicletech.com website.
This manual is considered correct at the me of prinng but is subject to change. For the latest
manuals & updates, refer to our website.
Copyright 2021 by TopVehicleTech.
All rights reserved. No part of this publicaon may be reproduced, distributed or transmied
in any form or by any means, including photocopying, recording, copying or other electronic or
mechanical methods, without the prior wrien permission of the author.