Topdon Topscan Instruction manual

Thank you for purchasing the TOPDON TopScan. This quick user guide will
walk you through the basic setup and operation of the TopScan wireless
diagnostic interface. For the best user experience, carefully read and follow all
the instructions and warnings.
Download & Install the APP
Please go to the App Store or Google Play and search for the
TopScan APP to download and install the APP.
TopScan
1
Register & Log In
Open the APP and log in to your TOPDON account. (If you do not
have an account, please register with your email.)
2
Log In
Log In
Email
Password
Remember Password
Forgot password?
Bind the VCI
To get the serial number and activation code, please scan the QR code
on the product. (Alternatively, once the Bluetooth connection between
the TopScan and your phone is established, the serial number and
activation code will be automatically recognized.) Then, tap Activate.
You will need to download the vehicle-specific software the first time
you use the diagnostic function. Tap Vehicle Diagnosis on the home
screen and download the software you need.
Tap Me > VCI Management > Add VCI.
3
Add VCI
Activate
Download the Diagnostic Software
4
All Recently American European Asian
AUDI
AUDI
V1.00 I 200MB Download
Expiry Date: 2022.12.18
BMW
BMW
V1.00 I 300MB
Expiry Date: 2022.12.18
Download
FORD
FORD
V1.00 I 260MB
Expiry Date: 2022.12.18
Download
*This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: ( 1 ) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
could void the user's authority to operate the equipment.
TopScan
Quick User Guide
Wireless
Bluetooth
OBDII/EOBD

Plug the TopScan into
the vehicle's OBD-II port.
Car OBD-II Interface
The vehicle's OBD-ll port is usually located under the dashboard.
5
Upgrade
The installed vehicle-specific software can be seen on the software download
page. When a new version is available, an Update button will display. Tap the
button to update the software.
For firmware upgrades, tap Me > Firmware Upgrade to update the firmware
if a new version is available.
FAQ
Q: What should I do if a communication error occurs?
A: Follow the steps below to identify the problem:
1) Check if the ignition is ON.
2) Check if the TopScan is securely plugged into the vehicle’s OBD-ll port.
3) Turn the ignition off. Then, turn it on after 10 seconds and continue the
operation.
4) Check if the vehicle’s control module is defective.
Q: Why do I need to download the diagnostic software after installing the
TopScan APP?
A: Since there are various vehicle manufacturers, different diagnostic
software is required for different brands.
Q: What special functions does the TopScan support?
A: The TopScan supports 8 special functions, including Oil Resets, Throttle
Adaptation, EPB Resets, ABS Bleeding, Steering Angle Resets, DPF
Regeneration, Airbag Resets, and BMS Resets.
Q: Do I need to update the firmware before using it for the first time?
A: Yes. Firmware will automatically update to the latest version once the
TopScan is connected with your phone via Bluetooth. You can also tap
Me > Firmware Upgrade to update the firmware manually.
Q: Can multiple devices be bound to one TopScan APP account?
A: Yes.
Your TopScan is now ready for use.
8
Turn the ignition to the "ON" position.
The red LED light on the TopScan indicates it is powered on.
ENGINE
START
STOP
6
Tap Vehicle Diagnosis on the home screen, then tap VCI at the top right
of the screen to establish a Bluetooth connection with the unit. When
connection is established, the LED light on the unit will turn solid blue.
Bluetooth
Bluetooth Connection
7
Car OBD-II Interface