Toro 137-0592 User manual

FormNo.3414-686RevA
SparkArresterKit
LogSplitter
ModelNo.137-0592
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia
tocausecancer,birthdefects,orreproductiveharm.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
1Nopartsrequired–Removethemuferguards.
Screw(5mm)2
2Sparkarrester1Installthesparkarrester.
1
RemovingtheMufer
Guards
NoPartsRequired
Procedure
Note:Retainallhardwareunlessindicatedotherwise.
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowthemachinetocoolcompletely.
3.Removethe4bolts(M6)andmuferguardfrom
theengine(Figure1).
g208610
Figure1
1.Bolt—M6(4)2.Muferguard
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3414-686*A

4.Removethe2nuts(8mm),gasket,andmufer
fromthecylinder(Figure2).
g208611
Figure2
1.Muferprotector5.Gasket
2.Screw(6mm)6.Cylinderbolt(2)
3.Mufer7.Screw—5mm(4)
4.Nut—8mm(2)
5.Remove1screw(6mm)and4screws(5mm)
fromthemuferprotector,andremovethe
muferprotector(Figure2).
2
InstallingtheSparkArrester
Partsneededforthisprocedure:
2Screw(5mm)
1Sparkarrester
Procedure
1.Removeanddiscardthe2screws(5mm)and
bafefromthemufer(Figure3).
g208909
Figure3
1.Screw—5mm(2)2.Bafe
2.Installthesparkarrestertothemuferusing2
screws(5mm)fromthekit(Figure2).
g208908
Figure4
1.Screw—5mm(2)2.Sparkarrester
3.Installthemuferprotectortothemuferusing
1screw(6mm)and4screws(5mm)asshown
inFigure2.
4.Installthemuferandgasketontothecylinder
boltsusing2nuts(8mm)asshowninFigure2.
5.Installthemuferguardusingthe4boltsin
Figure1thatyouremovedpreviously.
2

Maintenance
RecommendedMaintenanceSchedule(s)
MaintenanceService
IntervalMaintenanceProcedure
Every100hours•Cleanthesparkarrester.
EngineMaintenance
CleaningtheSparkArrester
ServiceInterval:Every100hours/Every6months
(whichevercomesrst)
1.Removethemuferfromthemachine;referto1
RemovingtheMuferGuards(page1).
2.Removethesparkarrester(Figure4).
3.Useabrushtocarefullyremovecarbondeposits
fromthespark-arresterscreen(Figure5).
Note:Replacethesparkarresterifithas
breaksorholes.
g208746
Figure5
1.Sparkarrester2.Brush
4.Installthesparkarrester(Figure4)
3