Toshiba e-studio1058 Guide

DIGITAL MULTIFUNCTIONAL SYSTEM
Start Guide
DIGITAL MULTIFUNCTIONAL SYSTEM
Start Guide
estudio1208_us_sg.book 1 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

TABLE OF CONTENTS
CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SUPPLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
FOR THE ADMINISTRATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SOFTWARE LICENSE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PART NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TURNING THE POWER ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
OPERATION MANUALS AND HOW TO USE THEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
•
Downloading Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
estudio1208_us_sg.book 2 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

3
CAUTIONS
Each instruction also covers the optional units used with these
products.
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
Notice for users in the USA
BE SURE TO ASK YOUR AUTHORIZED TOSHIBA DEALER
ABOUT THE WARRANTY THAT YOUR SELLING DEALER
EXTENDS TO YOU. In order to assure you, the end-user, of
warranty protection Toshiba extends a limited warranty to each
of its authorized dealers and, in turn, requires each of its
authorized dealers to extend its own warranty to you on terms
that are no less favorable than those given to the dealer by
Toshiba. You should be aware, however, that Toshiba does
not itself extend any warranties, either express or implied,
directly to you, the end-user, and no one is authorized to make
any representations or warranties on behalf of Toshiba.
Specifically, TOSHIBA DOES NOT EXTEND TO YOU, THE
END-USER, ANY EXPRESS WARRANTY OR ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR USE
OR FITNESS FOR ANY PARTICULAR PURPOSE IN
CONNECTION WITH THE HARDWARE, SOFTWARE OR
FIRMWARE EMBODIED IN, OR USED IN CONJUNCTION
WITH THIS PRODUCT. Toshiba is not responsible for any
damages or loss, either direct, incidental or consequential,
which you, the end-user, may experience as a result of your
purchase or use of the hardware, software or firmware
embodied in or used in conjunction with this Product.
Your sole remedy, in the event that you encounter any
difficulties with this Product, is against the authorized dealer
from which you purchased the Product.
e-STUDIO1058/e-STUDIO1208 (DP-1058/1208)
Digital Multifunctional System
In the event that this authorized dealer does not honor its
warranty commitments, contact Toshiba America Business
Solutions, Inc., 25530 Commercentre Drive Lake Forest, CA
92630 Tel: [phone], so that Toshiba can try to help
assure complete satisfaction of all the warranty rights to which
you are entitled from the authorized dealer.
Safety precautions
This Digital Equipment is rated Class 1 and complies with 21
CFR 1040.10 and 1040.11 of the CDRH standards. This
means that the equipment does not produce hazardous laser
radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other
covers.
• The equipment’s exterior covers contain several safety
interlock switches. Do not bypass any safety interlock by
inserting wedges or other items into switch slots.
Laser information
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
FOR YOUR RECORDS ...
To protect against loss or theft, record and retain for reference
the machine’s serial number located at the lower left corner of
the left side of the machine.
Model Number
Serial Number
Date of Purchase
Place of Purchase
Authorized Toshiba Printer
Service Department Number
Warranty
While every effort has been made to make this document as
accurate and helpful as possible, Toshiba makes no warranty
of any kind with regard to its content. All information included
herein is subject to change without notice. Toshiba is not
responsible for any loss or damages, direct or indirect, arising
from or related to the use of this operation manual.
Reproduction, adaptation or translation without prior written
permission is prohibited.
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines.
This equipment should be installed and operated keeping the
radiator at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
Toshiba Digital Multifunctional System,
Wave length e-STUDIO1058/e-STUDIO1208:
788 nm + 12 nm/ -13 nm
Pulse times e-STUDIO1058/e-STUDIO1208:
Normal paper mode/Heavy paper mode
3.470 μs ± 0.014 μs / 7 mm
Output power e-STUDIO1058/e-STUDIO1208:
Max 2.5mW (LD1+LD2+LD3+LD4)
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC
60825-1 Edition 2-2007).
"BATTERY DISPOSAL"
THIS PRODUCT CONTAINS A LITHIUM PRIMARY
MEMORY BACK-UP BATTERY THAT MUST BE DISPOSED
OF PROPERLY. PLEASE CONTACT YOUR LOCAL
TOSHIBA DEALER OR AUTHORIZED SERVICE
REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF
THIS BATTERY.
This product utilizes a CR coin Lithium battery which contains
a Perchlorate material. Special handling for this material may
apply, California residents,
See www.dtsc.ca.gov/hazardouswaste/perchlorate/
Others, consult local environmental officers.
estudio1208_us_sg.book 3 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

4
EMC (this machine and peripheral
devices)
WARNING:
FCC Regulations state that any unauthorized changes or
modifications to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this
equipment.
A Cable of 10 m or less is preferable.
Symbols in this manual
To ensure safe use of the machine, this manual uses various
safety symbols. The safety symbols are classified as explained
below. Be sure you understand the meaning of the symbols
when reading the manual.
Shielded interface cables must be used with this equipment
to maintain compliance with EMC regulations.
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Supplier's Declaration of Conformity
Toshiba Digital Multifunctional System,
DP-1058/DP-1208 (e-STUDIO1058/e-STUDIO1208)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Toshiba America Business Solutions, Inc.
25530 Commercentre Drive
Lake Forest, CA 92630
Tel: [phone]
Meaning of the symbols
WARNING CAUTION
Indicates a risk of death or
serious injury.
Indicates a risk of human
injury or property damage.
CAUTION! HOT DO NOT
DISASSEMBLE
PINCH POINT KEEP
CLEAR
MANDATORY
ACTIONS
PROHIBITED
ACTIONS
Power notes
WARNING
Be sure to connect the power cord only to a power
outlet that meets the specified voltage and current
requirements. Also make certain the outlet is
properly grounded. Do not use an extension cord
or adapter to connect other devices to the power
outlet used by the machine.
Using an improper power supply may cause fire or
electrical shock.
* For the power supply requirements, see the name
plate on the left side of the machine.
Do not damage or modify the power cord.
Placing heavy objects on the power cord, pulling it, or
forcibly bending it will damage the cord, resulting in
fire or electrical shock.
Do not insert or remove the power plug with wet
hands.
This may cause electrical shock.
Be sure to connect the power cord only to a power
outlet that meets the specified voltage and current
requirements. Also make certain the outlet is
properly grounded.
CAUTION
When removing the power plug from the outlet, do
not pull on the cord.
Pulling on the cord may cause damage such as wire
exposure and breakage, and may result in fire or
electrical shock.
estudio1208_us_sg.book 4 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

5
If you will not use the machine for a long time, be
sure to remove the power plug from the outlet for
safety.
When moving the machine, switch off the main
power and remove the power plug from the outlet
before moving.
The cord may be damaged, will create a risk of fire or
electrical shock.
Installation notes
CAUTION
Do not install the machine on an unstable or
slanted surface. Install the machine on a surface
that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.
If peripheral devices are to be installed, do not install
on an uneven floor, slanted surface, or otherwise
unstable surface. Danger of slippage, falling, and
toppling. Install the product on a flat, stable surface
that can withstand the weight of the product.
Do not install the equipment on a stand made of
glass.
Do not install in a location with moisture or dust.
Risk of fire and electrical shock.
If dust enters the machine, dirty output and machine
failure may result.
Locations that are excessively hot, cold, humid, or
dry (near heaters, humidifiers, air conditioners, etc.)
The paper will become damp and condensation may form
inside the machine, causing misfeeds and dirty output.
If the location has an ultrasonic humidifier, use pure
water for humidifiers in the humidifier. If tap water is
used, minerals and other impurities will be emitted,
causing impurities to collect on the inside of the
machine and create dirty output.
When the machine is installed, the adjusters must
be lowered to the floor to secure the machine
(prevent it from moving).
Rotate the adjusters in the locking direction until they
are in firm contact with the floor.
If you find it necessary to reposition the machine
due to rearrangement of your office layout or
other reason, retract the adjusters from the floor,
turn off the power, and then move the machine.
(After moving the machine, lower the adjusters again
to secure the machine.)
Locations exposed to direct sunlight
Plastic parts may become deformed and dirty output
may result.
Locations with ammonia gas
Installing the machine next to a diazo copy machine
may cause dirty output.
Do not install the machine in a location with poor air
circulation.
A small amount of ozone is created inside the
machine during printing. The amount of ozone created
is not sufficient to be harmful; however, an unpleasant
odor may be noticed during large copy runs, and thus
the machine should be installed in a room with a
ventilation fan or windows that provide sufficient air
circulation. (The odor may occasionally cause
headaches.)
* Install the machine so that people are not directly
exposed to exhaust from the machine. If installed near
a window, ensure that the machine not be exposed to
direct sunlight.
Near a wall
Be sure to allow the
required space around
the machine for servicing
and proper ventilation.
(The machine should be
no closer than the
distances indicated below from walls.)
Locations subject to vibration.
Vibration may cause failure.
The machine includes a built-in hard drive. Do not
subject the machine to shock or vibration. In particular,
never move the machine while the power is on.
• The machine should be installed near an accessible
power outlet for easy connection.
• Connect the machine to a power outlet which is not
used for other electric appliances. If a lighting fixture
is connected to the same outlet, the light may flicker.
About consumables
CAUTION
Do not throw a toner cartridge into a fire.
Toner may fly and cause burns.
Store a toner cartridge out of the reach of children.
Machine
30cm
30cm 45cm
estudio1208_us_sg.book 5 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

6
ENVIRONMENT
The products that meet the ENERGY STAR® guidelines carry
the ENERGY STAR® logo.
The products without the logo may not meet the ENERGY
STAR® guidelines.
SUPPLIES
Standard supplies for this product that can replaced by the
user include paper and toner cartridges.
Toshiba recommends that genuine Toshiba toner cartridges
and recommended transparency film are used.
Storage of supplies
1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper
may curl or become damp, resulting in paper misfeeds.
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side
up. Do not store a toner cartridge standing on end. If stored
standing on end, the toner may not distribute well even after
shaking the cartridge vigorously, and will remain inside the
cartridge without flowing out.
• Store the toner in a location that is cooler than 104°F (40°C).
Storage in a hot location may cause the toner in the
cartridge to solidify.
•
Please use Toshiba-recommended toner cartridges. If toner
cartridges other than Toshiba-recommended toner cartridges
are used, the machine may not attain full quality and
performance and there is a risk of damage to the machine.
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is
guaranteed for at least 7 years following the termination of
production. Spare parts are those parts of the machine which
may break down within the scope of the ordinary use of the
product, whereas those parts which normally exceed the life of
the product are not to be considered as spare parts.
Consumables too, are available for 7 years following the
termination of production.
Handling precautions
WARNING
Do not place a container of water or other liquid, or a
metal object that might fall inside, on the machine.
If the liquid spills or the object falls into the machine,
fire or electrical shock may result.
Do not remove the machine casing.
High-voltage parts inside the machine may cause
electrical shock.
Do not make any modifications to this machine.
Doing so may result in personal injury or damage to
the machine.
Do not use a flammable spray to clean the
machine.
If gas from the spray comes in contact with hot
electrical components or the fusing unit inside the
machine, fire or electrical shock may result.
If you notice smoke, a strange odor, or other
abnormality, do not use the machine.
If used in this condition, fire or electrical shock may result.
Immediately switch off the main power and remove
the power plug from the power outlet.
Contact your dealer or nearest Toshiba Service
Department.
If a thunder storm begins, switch off the main power
and remove the power plug from the outlet to prevent
electrical shock and fire due to lightning.
If a piece of metal or water enters the machine,
switch off the main power and remove the power
plug from the power outlet.
Contact your dealer or nearest Toshiba Service
Department. Using the machine in this condition may
result in electrical shock or fire.
CAUTION
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine.
Do not install the machine in a location that will
block the ventilation ports.
Blocking the ventilation ports will cause heat to build
up in the machine, creating a risk of fire.
The fusing unit and paper exit area are hot. When
removing a misfeed, do not touch the fusing unit
and paper exit area. Take care not to burn
yourself.
When loading paper, removing a misfeed,
performing maintenance, closing the front and
side covers, and inserting and removing trays,
take care that your fingers are not pinched.
Products that have earned the ENERGY
STAR® are designed to protect the
environment through superior energy
efficiency.
GENUINE SUPPLIES
For best copying results, be sure to use only Toshiba
Genuine Supplies which are designed, engineered, and
tested to maximize the life and performance of Toshiba
products. Look for the Genuine Supplies label on the toner
package. Toshiba Imaging Equipment does not prevent the
use of Non-Manufacturer toner cartridges.
estudio1208_us_sg.book 6 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

7
FOR THE
ADMINISTRATOR
Settings mode password
The administrator password is required to change the
machine’s settings mode.
Settings mode can be changed from either the operation panel
or using a computer web browser. After setting up the
machine, refer to [SETTINGS MODE] in the User's Manual to
set a new password.
Password for logging in from this
machine
The factory default password for the machine is "admin".
Password for logging in from a computer
In the factory default state, the only account that can be used
to log in from a web browser is the "Administrator" account.
When user authentication is enabled, the "System
Administrator" account can be also be used for login. In
addition, a fixed user can be specified as a login user. The
default password of each account is shown below.
When you log in as an "Administrator" or "System
Administrator", you can manage all settings that can be
accessed from a web browser.
Forwarding all transmitted and
received data to the administrator
(document administration function)
This function is used to forward all data transmitted and
received by the machine to a specified destination (Scan to
E-mail address, Scan to FTP destination, or Scan to Network
Folder destination).
This function can be used by the administrator of the machine
to archive all transmitted and received data.
To configure the document administration settings, click [Application
Settings] and then [Document Administration Function] in the Web
page menu. (Administrator rights are required.)
Points to notice when connecting to
the network
When connecting the machine to the network;
•Do not directly connect to the internet but to the sub
network (range divided by the router) in which only the
authorized device (such as PC) for the communication
with the machine in the protected LAN in some way
like firewall is connected.
•Manage the connected devices in the sub network so
that the network condition may always be maintained.
•Use the filter setting function to prevent illegal access.
•Be sure to log out when leaving your computer while
changing the web page settings for security purposes.
•For security purposes, do not access any other site
while you are logged in to the web page setting site.
SOFTWARE LICENSE
The SOFTWARE LICENSE will appear when you install the
software from the CD-ROM. By using all or any portion of the
software on the CD-ROM or in the machine, you are agreeing
to be bound by the terms of the SOFTWARE LICENSE.
Account Password
User users users
Administrator admin admin
System
Administrator
sysadmin sysadmin
The format, exposure, and resolution settings of
transmitted and received data remain in effect when
the data is forwarded.
estudio1208_us_sg.book 7 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

8
Document filing
The machine includes the document filing function, which
stores document image data on the machine’s hard drive.
Stored documents can be called up and printed or transmitted
as needed. If a hard drive failure occurs, it will no longer be
possible to call up the stored document data. To prevent the
loss of important documents in the unlikely event of a hard
drive failure, keep the originals of important documents or store
the original data elsewhere.
With the exception of instances provided for by law, Toshiba
bears no responsibility for any damages or loss due to the loss
of stored document data.
About password management
It is requested to change the administrator password right after
installing the machine. The password should be changed by
the administrator and strictly managed. Write down the
changed password in the following table and keep it carefully.
Please write "New Password".
About password management
A unique administrator password is required before using the
device for the first time. When the device is powered on for the
first time, the following dialogue will be displayed to change the
default administrator password to a unique password (5 to 255
one byte characters).
Change Administrator Password
(1) Tap the [Current Password] text box and enter the factory
default password.
The factory default password for the machine is "admin".
(2) Tap the [New Password] text box and enter the new
password.
Enter a password consisting of 5 to 255 characters.
(3) Tap the [New Password (confirmation)] text box and enter
the new password.
Enter the same password entered at step (2) for
confirmation.
(4) Tap the [Do not show again] key checkbox to .
If the checkbox is left as , the [Change Administrator
Password] screen will be displayed again at the next time
the machine is turned on.
(5) Tap the [Change] key.
The new password is assigned to the device. If the [Skip]
key is selected, the [Change Administrator Password]
screen will be closed without changing the current
password.
It is strongly recommended to assign a strong administrator
password and the password should be managed by authorized
personnel. Please securely store the assigned password.
• This machine contains the software having modules
developed by Independent JPEG Group.
• Copyright© 1995-2007 Adobe Macromedia Software LLC.
All rights reserved.
• This product includes the Adobe® PostScript®3™ of Adobe
Systems Incorporated.
• This product uses "InstantBoot" provided by IT Access Co.,
Ltd., Japan.
Factory default New Password
Administrator
password
admin
Please take care not to forget newly set administrator
password. If it is forgotten there is no way to confirm it
and some settings and functions that require
administrator authorization may not be used.
For security reasons, it is not recommended that the
machine is connected to a network before changing
the administrator password.
When the password is lost or forgotten, please contact
your servicing Toshiba dealer.
Change Administrator Password
Current Password Current Password
Do not Show Again
Change Skip
New Password New Password
New Password
(Confirmation) New Password (Confirmation)
(1)
(2)
(3)
(4) (5)
(1)
(2)
(3)
(4) (5)
✂
✂
estudio1208_us_sg.book 8 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

9
SPECIFICATIONS
Basic Specifications / Copier
Specifications
Name e-STUDIO1058/e-STUDIO1208
Type Console
Color Monochrome
Copier system Laser electrostatic copier
Resolution Read: 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi
Write: 1200 × 1200dpi, 600 × 600 dpi
Gradation Scan: equivalent to 256 levels
Print: equivalent to 256 levels
Original paper sizes Max. 11" x 17" (A3) for sheets and bound documents
Copy sizes 12" × 18" (A3 wide) to 5-1/2" × 8-1/2"R (A5R), Transparency
film, Heavy paper, Tab paper, Glossy paper, Custom
Tray 1: 8-1/2" x 11", A4, B5
Tray 2: 8-1/2" × 11", A4
Tray 3: 12" × 18" (A3 wide), 11" × 17", 8-1/2" × 14",
8-1/2" × 13-1/2", 8-1/2" × 13-2/5", 8-1/2" × 13",
8-1/2" × 11", 8-1/2" × 11"R, 7-1/4 × 10-1/2"R, A3,
B4, A4W, A4, A4R, B5, B5R
Tray 4: 12" × 18" (A3 wide), 11" × 17", 8-1/2" × 14",
8-1/2" × 13-1/2", 8-1/2" × 13-2/5", 8-1/2" × 13",
8-1/2" × 11", 8-1/2" × 11"R, 7-1/4 × 10-1/2"R,
5-1/2" × 8-1/2"R, A3, B4, A4W, A4, A4R, B5, B5R,
A5R
Lost margin
Leading edge: 3/32" ± 13/64" (2 mm to 5 mm)
Trailing edge: 3/32" ± 13/64" (2 mm to 5 mm)
Leading edge / Trailing edge: total 21/64" (8 mm) or less
Left edge / Right edge: total 11/64" ± 3/32" (4 mm ± 2 mm)
Paper type Tray 1/2: Plain
Tray 3: Plain, Heavy paper (26 lbs. bond to 80 lbs.
Cover (106 g/m2 to 220 g/m2))
Tray 4: Plain, Heavy paper (26 lbs. bond to 80 lbs.
Cover (106 g/m2 to 220 g/m2)), Transparency
film, Label, Tab paper, Custom
Paper weight:
Tray 1/2: 16 lbs. bond to 28 .lbs bond (60 g/m
2
to 105 g/m
2
)
Tray 3/4:
16 lbs. bond to 80 lbs. Cover (60 g/m
2
to 220 g/m
2
)
•Some usage conditions or paper types may prevent
correct printing.
Warm-up time 210 seconds
•This may vary depending on the ambient conditions.
First-copy time Document glass 3.2 seconds
DSPF 5.5 seconds
This may vary depending on the state of the machine.
* Portrait feeding of 8-1/2" x 11" (A4) sheets.
Continuous
copying
speeds*
(when shifter is
not in operation)
e-STUDIO1058 e-STUDIO1208
8-1/2" × 11", 105
copies/min. 120 copies/min.
A4, B5, A5
8-1/2" × 11"R, 67
copies/min. 76 copies/min
7-1/4" × 10-1/2"R,
A4R, B5R
8-1/2" × 14", 58
copies/min. 66 copies/min.
8-1/2" × 13",
8-1/2" × 13-2/5",
8-1/2" × 13-1/2",
B4
11" × 17" (A3) 52
copies/min. 54 copies/min.
12" × 18", 49 copies/min. 51 copies/min.
A3 wide
* Continuous speed for same original source. Output may
be temporarily interrupted to stabilize image quality.
Copy ratios Same size: 1: 1 ± 0.8 %
Enlarge (Inch size): 121 %, 129 %, 200 %, 400 %
(AB size: 115 %, 122 %, 141 %, 200 %, 400 %)
Reduce (Inch size): 25 %, 50 %, 64 %, 77 %
(
AB size: 25 %, 50 %, 70 %, 81 %, 86 %)
Zoom range: 25 to 400 % in 1 % increments, total 376
increments. Can calculate zoom rate when mm is specified.
(25 - 200 % using automatic document feeder)
Paper feed /
capacity
•1200 plus 800 plus 500 plus 500 ( = 3000) sheets in 4
trays
•Using 21 lbs. bond (80 g/m2) weight paper
Max. paper feed
/ max. capacity 1200 plus 800 plus 500 plus 500 ( = 3000) sheets in 4 trays
plus 500-sheet multi-bypass tray plus 5000 sheets in large
capacity trays plus 5000 sheets in large capacity trays (total
13500 sheets)
•Using 21 lbs. bond (80 g/m2) weight paper
Continuous copy Max. 9999 copies
Memory Standard: 5 GB HDD: 1 TB SD card: 4GB
•1 GB = One billion bytes when referring to hard drive
capacity. Actual format capacity is less.
Ambient
environment
Operating environment 54 °F to 91 °F (10 °C to 35 °C)
(20 % to 85 % RH) 800 - 1,013 hPa
Standard environment 68 °F to 77 °F (20 °C to 25 °C)
(65 ± 5 % RH)
Required power
supply
AC 208-240V/15A, 60Hz
Power consumption Max. 3.55 kW
Dimensions 45-3/64" (W) × 30-33/64" (D) × 60-13/64" (H)
(1144 mm (W) × 775 mm (D) × 1529 mm (H))
(When the operation panel and keyboard are set to the
default position)
Weight Approx. 661.4 lbs. (300 kg)
Overall
dimensions
48-29/32" (W) × 30-33/64" (D) (1242 mm (W) × 775 mm (D))
(With multi-bypass tray extended, and the operation panel
and keyboard are set to the default position)
Automatic Document Feeder
Document
feeder types
Duplex Single Pass Feeder (DSPF)
Original paper
sizes
11" × 17" to 5-1/2" × 8-1/2" (A3 to A5)
Original paper
types
Paper weight
Thin paper 9 lbs bond (38 g/m2) to 13 lbs bond (49 g/m2)
Plain paper 13 lbs bond (50 g/m
2
) to 110 lbs index (205 g/m
2
)
Two-sided
13 lbs index (52 g/m2) to 110 lbs index (205 g/m2)
Paper storage
capacity
250 sheets (21 lbs. bond (80 g/m2))
(or maximum stack height of 1-9/32" (32.5 mm))
Scan speed
(copy)
120 one-sided sheets/minute (600 × 300 dpi)
•When scanning one-sided, 8-1/2" × 11" (A4) vertical
documents
Multi Bypass Tray
Name Multi Bypass Tray
(MX-MFX1)
Multi Bypass Tray
(MX-MF11)
(For large capacity trays)
Paper sizes 12" x 18" (A3W) to 5-1/2" x
8-1/2"R (A5R)
12" x 18" (A3W) to 5-1/2" x
8-1/2"R (A5R) ,SRA3, SRA4
Useable paper 16 lbs bond to 110 lbs cover
(52 to 300 g/m2)
16 lbs bond to 80 lbs cover
(52 to 220 g/m2)
Paper capacity 100 sheets (21 lbs (80 g/m2))
500 sheets (21 lbs (80 g/m
2
))
Required power
supply
Supplied from the machine Supplied from large capacity
trays
Dimensions When paper tray is closed
4-39/64" (W) x 19-61/64"
(D) x 16-7/64" (H)
(117 mm (W) x 507 mm (D)
x 409 mm (H))
When paper tray is pulled out
14-11/16" (W) x 19-61/64"
(D) x 16-7/64" (H)
(373 mm (W) x 507 mm (D)
x 409 mm (H))
When paper tray is closed
27-3/4" (W) x 21-57/64" (D)
x 8" (H)
(705 mm (W) x 556 mm (D)
x 203 mm (H))
When paper tray is pulled out
34-9/16" (W) x 21-57/64"
(D) x 8" (H)
(878 mm (W) x 556 mm (D)
x 203 mm (H))
Weight Approx. 16.5 lbs (7.5 kg) Approx. 39.7 lbs (18 kg)
estudio1208_us_sg.book 9 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

10
* Output capacity may vary depending on environmental conditions at the
installation location, the type of paper used, and the storage condition of the
paper.
Large Capacity Tray
Name Large Capacity Tray (MX-LC12)
Paper sizes 8-1/2" x 11", A4, B5
Useable paper 16 lbs bond to 80 lbs cover (60 to 220 g/m2)
Paper capacity 3500 sheets (21 lbs (80 g/m2))
Required power
supply
Supplied from the machine
Dimensions 14-13/16" (W) x 22-43/64" (D) x 20-5/8" (H)
(376 mm (W) x 576 mm (D) x 524 mm (H))
Weight Approx. 63 lbs (28.5 kg)
Large Capacity Trays
Name Large Capacity Trays (MX-LC13 N)
Paper sizes 12" x 18" (A3W) to 8-1/2" x 11" (B5R) ,SRA3, SRA4
Useable paper 13 lbs bond to 110 lbs cover (52 to 300 g/m2)
Paper capacity 5000 sheets (2500 x 2 21 lbs (80 g/m2))
Required power
supply
AC 120V 60Hz
Dimensions 35-1/4" (W) x 30-1/32" (D) x 38-13/16" (H)
(895 mm (W) x 763 mm (D) x 986 mm (H))
Weight Approx. 288 lbs (131 kg)
Finisher (100-sheet stapling)
Name Finisher (MX-FN21)
Paper sizes Depends on feeder specifications
Useable paper
13 lbs bond to 110 lbs cover (52 to 300 g/m
2
)
No. of trays 3
Tray capacity
(21 lbs (80 g/m
2
)) *
Upper tray
Non-stapled 12" x 18" (A3W) / 9" x 12" (A4W) / 11" x
17" (A3) /8-1/2" x 14" (B4) / SRA3 / SRA4:
750 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R, B5)
/7-1/4" x 10-1/2"R (B5R) / 5-1/2" x 8-1/2"R
(A5R): 1,500 sheets
Staple function 11" x 17" (A3) / 8-1/2" x 14" (B4): 50 units
or 750 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R,
B5): 100 units or 1,500 sheets
Center tray
Non-stapled 12" x 18" (A3W) / 9" x12" (A4W) / 11" x
17" (A3) / 8-1/2" x 14" (B4) / SRA3 /
SRA4: 125 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R, B5)
/ 7-1/4" x 10-1/2"R (B5R) / 5-1/2" x
8-1/2"R (A5R): 250 sheets
Lower tray
Non-stapled 12" x 18" (A3W) / 9" x 12" (A4W) / 11" x
17" (A3) / 8-1/2" x 14" (B4) / SRA3 /
SRA4: 750 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R, B5)
/ 7-1/4" x 10-1/2"R (B5R) / 5-1/2" x
8-1/2"R (A5R): 1,500 sheets
8-1/2" x 11"/A4/B5 Non offset: 2,500
sheets
Staple function 11" x 17" (A3) / 8-1/2" x 14" (B4): 50 units
or 750 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R,
B5): 100 units or 1,500 sheets
Max. no. of
stapled sheets
(21 lbs (80 g/m
2
))
Max. no. of 100 sheets (8-1/2" x 11" (A4), B5)
Max. no. of 50 sheets (11" x 17" (A3), 8-1/2" x 14" (B4),
8-1/2" x 11"R (A4R))
Staple position 1 bottom, 1 top, 2 middle
Required power
supply
AC 120V 60Hz
Weight Approx. 134.5 lbs (61 kg)
Dimensions When output paper tray is stored
25-3/4" (W) x 30-1/8" (D) x 40-15/16" (H)
(654 mm (W) x 765 mm (D) x 1040 mm (H))
When output paper tray is extended
30-51/64" (W) x 30-1/8" (D) x 40-15/16" (H)
(782 mm (W) x 765 mm (D) x 1040 mm (H))
Saddle Stitch Finisher
(100-sheet stapling)
Name Saddle Stitch Finisher (MX-FN22)
Paper sizes Depends on feeder specifications
Useable paper 13 lbs bond to 110 lbs cover (52 to 300 g/m2)
No. of trays 4
Tray capacity
(21 lbs (80 g/m
2
)) *
Upper tray
Non-stapled 12" x 18" (A3W) / 9" x 12" (A4W) / 11" x
17" (A3) /8-1/2" x 14" (B4) / SRA3 / SRA4:
750 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R, B5)
/7-1/4" x 10-1/2"R (B5R) / 5-1/2" x 8-1/2"R
(A5R): 1,500 sheets
Staple function 11" x 17" (A3) / 8-1/2" x 14" (B4): 50 units
or 750 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R,
B5): 100 units or 1,500 sheets
Center tray
Non-stapled 12" x 18" (A3W) / 9" x 12" (A4W) / 11" x
17" (A3) /8-1/2" x 14" (B4) / SRA3 / SRA4:
125 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R, B5)
/7-1/4" x 10-1/2"R (B5R) / 5-1/2" x 8-1/2"R
(A5R): 250 sheets
(Offset output is not available)
Lower tray
Non-stapled 12" x 18" (A3W) / 9" x 12" (A4W) / 11" x
17" (A3) /8-1/2" x 14" (B4) / SRA3 / SRA4:
750 sheets
8-1/2" x 11"R (A4R) / 7-1/4" x 10-1/2"R
(B5R) / 5-1/2" x 8-1/2"R (A5R): 1,500
sheets
8-1/2" x 11"/ (A4/B5): 2,500 sheets
(Offset output is not available)
Staple function 11" x 17" (A3) / 8-1/2" x 14" (B4): 50 units
or 750 sheets
8-1/2" x 11" (A4) / 8-1/2" x 11"R (A4R,
B5): 100 units or 1,500 sheets
Saddle stitch tray
Non-stapled 16 lbs bond to 28 lbs bond (60 to 105
g/m2): 5 sheets
Staple function 16 lbs bond to 21 lbs bond (60 to 81.4
g/m2): 5 units (16 to 20 sheets), 10 units
(11 to 15 sheets), 15 units (6 to 10
sheets), 25 units (1 to 5 sheets)
21 lbs bond over to 28 lbs bond (81.4
g/m2 over to 105 g/m2): 15 units (6 to 10
sheets), 25 units (1 to 5 sheets)
Staple function 16 lbs bond to 21 lbs bond (60 to 81.4
in cover mode g/m2): 5 units (16 to 20 sheets), 10 units
(1 to 15 sheets)
21 lbs bond over to 28 lbs bond (81.4
g/m2 over to 105 g/m2): 10 units (1 to 10
sheets)
•Offset output is not available for 12" x 18" (A3W) / 7-1/4" x
10-1/2"R (B5R) / 5-1/2" x 8-1/2"R (A5R).
Max. no. of
stapled sheets
(21 lbs (80 g/m
2
))
Max. no. of 100 sheets (8-1/2" × 11" (A4), B5)
Max. no. of 50 sheets (11" × 17" (A3), 8-1/2" × 14" (B4),
8-1/2" × 11"R (A4R))
Staple position 1 bottom, 1 top, 2 middle
Staple method
(for saddle stitch)
Centered fold with stapling in 2 center places
Saddle stitch
fold position
Centered fold
Saddle usable
sizes
11" x 17" (A3) / 8-1/2 x 14" (B4) / 8-1/2" x 11"R (A4R) / 12" x
18" (A3W) / SRA3
estudio1208_us_sg.book 10 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

11
* Output capacity may vary depending on environmental conditions at the installation
location, the type of paper used, and the storage condition of the paper.
*1:There are cases when a connection cannot be established. Please contact
your local dealer for more information.
*2:XPS stands for XML Paper Specification. When equipped with the XPS
expansion kit. (MX-PUX1) A memory (1 GB) is required.
Saddle usable
paper weight
16 lbs bond (60 g/m2) to 110 lbs cover (300 g/m2)
Paper weighting 28 lbs bond (106 g/m2) to 110 lbs cover
(300 g/m2) is only able to be used in cover mode and for
single sheet fold.
Max. no. of
saddle-stitched
sheets
Max. no. of 20 sheets (21 lbs (80 g/m2)):
19 sheets (21 lbs bond (80 g/m2)) + 1 sheet (140 lbs index
(256 g/m2))
Required power
supply
AC 120V 60Hz
Weight Approx. 238.1 lbs (108 kg)
Dimensions When output paper tray is stored
30-13/64" (W) x 30-1/8" (D) x 40-15/16" (H)
(767 mm (W) x 765 mm (D) x 1040 mm (H))
When output paper tray is extended
35-9/32" (W) x 30-1/8" (D) x 40-15/16" (H)
(896 mm (W) x 765 mm (D) x 1040 mm (H))
Punch Module
Name Punch module (MX-PN13B)
Paper size for
punch module
11" x 17" (A3) to 7-1/4" x 10-1/2"R (B5R)
Holes 2 holes / 3 holes (Auto select)
Required power
supply
Supplied from finisher/saddle stitch finisher
Dimensions 3-47/64" (W) x 28-5/32" (D) x 9-13/32" (H)
(95 mm (W) x 715 mm (D) x 392 mm (H))
Weight Approx. 8.6 lbs (3.7 kg)
Relay Unit
Name Relay Unit (MX-RB13)
Dimensions 8-7/16" (W) x 29-59/64" (D) x 38-13/16" (H)
(214 mm (W) x 760 mm (D) x 986 mm (H))
Weight Approx. 29.5 lbs (13.4 kg)
Curl Correction Unit
Name Curl Correction Unit (MX-RB18)
Paper sizes Depends on feeder specifications
Useable paper Depends on feeder specifications
Required power
supply
Supplied from the machine
Dimensions 8-7/16" (W) x 29-59/64" (D) x 38-13/16" (H)
(214 mm (W) x 760 mm (D) x 986 mm (H))
Weight Approx. 39.3 lbs (18.5 kg)
Trimming Module
Name Trimming module (MX-TM10)
Useable size for
trimming
module
12" x 18" (A3W), 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, SRA3, A3, B4,
A4R
Max. no. of
sheets to be
trimmed
2 to 20 sheets (16 lbs bond to 21 lbs bond (60 g/m2 to 81.4
g/m2))
2 to 10 sheets (21 lbs bond over to 28 lbs bond (81.4 g/m2
over to 105 g/m2))
2 to 3 sheets (28 lbs bond over to 80 lbs cover (105 g/m2
over to 220 g/m2))
When plain paper trimmed. Including one front cover of 110
lbs cover (300 g/m2) or less.
Required power
supply
Supplied from saddle stitch finisher
Dimensions 9-7/8" (W) x 24-15/32" (D) x 15-7/8" (H)
(251 mm (W) x 625 mm (D) x 403 mm (H))
Weight Approx. 70.6 lbs (32 kg)
Folding Unit
Name Folding unit (MX-FD10)
Folding types Z-Fold, C-Fold, Accordion Fold, Double Fold, Half Fold.
Useable size for
folding unit
Z-Fold: 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R, A3, B4, A4R
C-Fold, Accordion Fold, Double Fold, Half Fold: 8-1/2" x
11"R, A4R
Useable paper 13 lbs bond to 28 lbs bond (52 g/m2 to 105 g/m2))
Tray capacity
(21 lbs (80 g/m
2
)) *
C-Fold/Accordion Fold/Double Fold
2-23/64" (60 mm) (Equivalent to 40 sheets. (Equivalent to 25
sheets for Double Fold))
Copies made in Z-Fold or Half Fold are output to the tray of
the finisher (100-sheet stapling) or saddle stitch finisher
(100-sheet stapling).
Required power
supply
Supplied from finisher/saddle stitch finisher
Dimensions 13-15/64" (W) x 31-15/64" (D) x 41-11/32" (H)
(336 mm (W) x 793 mm (D) x 1050 mm (H))
Weight Approx. 145.5 lbs (66 kg)
Inserter
Name Inserter (MX-CF11)
Useable size for
inserter
12" x 18" (A3W), 9" x 12" (A4W), 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4 x 10-1/2"R, 5-1/2" x 8-1/2"R, A3, B4, A4,
A4R, B5, B5R, A5R, SRA3, SRA4
Useable paper 16 lbs bond to 80 lbs cover (60 g/m2 to 220 g/m2))
No. of trays 2
Tray capacity
(21 lbs (80 g/m
2
)) *
Upper tray: 200 sheets
Lower tray: 200 sheets
Required power
supply
Supplied from the machine
Dimensions 21-1/4" (W) x 29-7/8" (D) x 50-1/4" (H)
(540 mm (W) x 760 mm (D) x 1276 mm (H))
Weight Approx. 99.2 lbs (45 kg)
Network Printer Specifications
Type Built-in type
Continuous print
speed
Same as continuous copy speed
Resolution Data processing: 600 x 600 dpi, 1,200 x 1,200 dpi
Print: 600 x 600 dpi, 1,200 x 1,200 dpi
Page
description
language*
PCL6 emulation, Adobe® PostScript®3™*1, XPS*2
Compatible
protocols
TCP/IP (IPv4/IPv6), IPX/SPX, IPP, EtherTalk
Compatible OS Windows 8.1, Windows Server 2012, Windows 10,
Windows Server 2016, Windows Server 2019
macOS (10.9, 10.10, 10.11, 10.12, 10.13, 10.14, 10.15)
Internal fonts 80 fonts for PCL, 139 fonts for Adobe® PostScript®3™*1
Memory Machine system memory and hard disk
Interface 10BASE-T/100BASE-TX/1000BASE-T
USB 2.0 (High-Speed mode)
estudio1208_us_sg.book 11 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

12
*1: You must decrease the scan size when increasing the resolution.
*2: There are cases when a connection cannot be established. Please contact
your local dealer for more information.
*3: XPS stands for XML Paper Specification.
*4: A scanner function expansion kit (MX-EB11) is required.
*5: When PDF, PDF/A, or Encrypt PDF iis selected.
Network Scanner Specifications
Type Color scanner
Scan resolution
(main × vertical)
100 × 100 dpi, 150 × 150 dpi, 200 × 200 dpi, 300 × 300 dpi,
400 × 400 dpi, 600 × 600 dpi (push scan)
50 to 9600 dpi *1 (pull scan)
Scan speed
(8-1/2" × 11"
(A4))
B/W:120 sheets/minute (one-sided)
Color:120 sheets/minute (one-sided)
•When in standard mode using Toshiba standard paper
(8-1/2" × 11" (A4) size with 6% coverage) and the auto
color detector is turned off. The speed varies depending
on the data volume of the original.
Interface 10BASE-T/100BASE-TX/1000BASE-T,
USB 2.0 (when an external memory device is used)
Compatible
protocols
TCP/IP (IPv4)
Compatible OS
*2
Pull scan (TWAIN), Windows 8.1, Windows Server 2012,
Windows 10, Windows Server 2016, Windows Server 2019
Output format (B/W)
TIFF, PDF, PDF/A, encrypted PDF, XPS *3
Compression method: decompression, G3 (MH), G4 (MMR)
(Gray scale/color)
TIFF, JPEG, PDF, PDF/A, encrypted PDF, high
compression PDF *4, XPS *3
Compression method: JPEG (high, mid, and low
compression), Emphasis black letter *5, high compression
PDF *4
Driver TWAIN compliant
estudio1208_us_sg.book 12 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

13
PART NAMES
(1) Finisher (100-sheet stapling)*
This staples and outputs paper.
(2) Status indicator*
The status of the machine is indicated.
(3) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned at
one time.
(4) Operation panel
This panel hosts the [POWER] button, [Power Save]
button/indicator, [Home Screen] button/indicator, main
power button, USB port (A type) and touch panel. Use the
touch panel to operate each of these functions.
(5) Front cover
Open this to remove a paper misfeed from or to switch the
main power switch on and off.
(6) Keyboard
Use this as a substitute for the soft keyboard displayed on
the touch panel.
(7) Toner tray
This tray contains toner cartridge. When the toner in a
cartridge runs out, the cartridge that ran out must be
replaced.
(8) Bypass tray*
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" × 11"R or A4R, pull
out the extension guide.
(9) Trimming module*
This trims the excess of saddle-stitched output.
(10)Punch module*
This punches and outputs paper.
(11)Curl correction unit*
This corrects curls in printed paper.
(12)Tray 1
Store paper in this tray. Up to 1200 sheets can be stored.
(13)Tray 3
Store paper in this tray. Up to 500 sheets can be stored.
(14)Tray 4
Store paper in this tray. Up to 500 sheets can be stored.
(15)Tray 2
Store paper in this tray. Up to 800 sheets can be stored.
(16)Tray 5 (MX-LC12)*
Store paper in this tray. Up to 3500 sheets can be stored.
* Options
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9) (
10 )( 11 )( 12 )( 13 )( 14 )( 15 )( 16 )
estudio1208_us_sg.book 13 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

14
TURNING THE POWER ON AND OFF
This machine has a main power switch, found at the bottom left after the front cover is opened, and a power button,
located on the operation panel.
Turning on the power
Turn the main power switch to the " " position.
After the main power indicator lights up green, press the [POWER] button.
Turning off the power
Turn off the power by pressing the [POWER] button, then turn the main power switch to the " " position.
Restarting the machine
In order for some settings to take effect, the machine must be restarted. Follow the message displayed on the touch
panel to restart the system (turn off the power by pressing the [POWER] button and then press it again to turn the power
back on).
• When turning off the main power switch, make sure that all indicators other than the main power are turned off.
• In the case of a sudden main power outage, turn the power for the machine back on and then turn it off in the correct order.
If you turn off the main power switch or unplug the power cord while the indicator is lit up or blinking, the hard disk drive
may be damaged or data may be lost.
• Turn off both the [POWER] button and the main power switch and unplug the power cord if you suspect a machine failure,
if there is a bad thunderstorm nearby, or before you move the machine.
• When you change a toner cartridge while the keyboard is installed, be sure to store it in the operation panel unit. If a toner
cartridge is changed while the keyboard is pulled out, the cartridge may come in contact with the keyboard and cause
damage.
In some machine operating states, restarting using the [POWER] button may not make the settings take effect. In this case,
turn off the main power switch and then turn it on again.
Main power indicator
[POWER] button
Main power switch
estudio1208_us_sg.book 14 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

15
OPERATION MANUALS AND HOW TO USE
THEM
Start Guide (this document)
Features important safety notes, names of parts and components, information about the power-on procedure, operation
overviews, information for people who manage the machine, and information about other aspects of this machine.
Read this section before using the machine for the first time.
Software Setup Guide (PC)
Explains how to install the various drivers needed when using this machine as a printer or network scanner.
Refer to this document when using this machine from a computer.
User's Manual (PC)
Can be downloaded from the machine to a computer and viewed.
Refer to this document to learn more about printer mode and settings mode, and to learn about the details of each type
of mode.
Operation Guide (Built-in)
Can be viewed by touching the operation guide icon on the machine’s touch panel.
When you are using this machine, use this document to see an overview of a particular mode or when you are having
trouble operating the machine.
Administrator Machine Adjustment Guide (PC)
Explains fine adjustment of the machine, such as adjustment of the fusing unit current, and adjustment of peripheral
devices.
Refer to this guide when you need to configure detailed machine settings.
Downloading Manual
You can download manuals by following the procedures below while the machine is connected to the network.
(1) Confirm the machine’s IP address
First, tap the [Settings] key on the home screen, and then tap [System Settings] → [List Print (User)] in the left menu.
Next, tap the [Print] key in the [All Custom Setting List], and confirm the IP address in the printed list.
(2) Insert the machine’s IP address into the address bar of your web browser to access the machine.
http://machine’s IP address/
User verification may be required depending on the machine’s settings.
Please check with the machine’s administrator to obtain the account information necessary for verification.
(3) Download the manual
Click [Operation Manual Download] on the displayed page.
Next, select the desired language from the "Download Language" list, select the manual you want to download, and then click
the [Download] button.
(4) Double-click on the downloaded file to display the manual.
estudio1208_us_sg.book 15 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

estudio1208_us_sg.book 16 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

estudio1208_us_sg.book 17 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

estudio1208_us_sg.book 18 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

Please note
• For information on your operating system, please refer to your operating system manual or the online Help function.
• The explanations of screens and procedures in a Windows environment are primarily for Windows® 10. The screens may vary
depending on the version of the operating system or the software application.
• The explanations of screens and procedures in a macOS environment are based on macOS 10.10 in the case of macOS. The
screens may vary depending on the version of the operating system or the software application.
• Wherever "e-STUDIOxxxx" appears in this manual, please substitute your model name for "xxxx".
• Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please
contact your dealer or nearest Toshiba Service Department.
• This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other problem
is discovered, please contact your dealer or nearest Toshiba Service Department.
• Aside from instances provided for by law, Toshiba is not responsible for failures occurring during the use of the product or its
options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due
to use of the product.
Warning
• Reproduction, adaptation or translation of the contents of the manual without prior written permission is prohibited.
• All information in this manual is subject to change without notice.
Illustrations and the operation panel and touch panel shown in this manual
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment.
The explanations in this manual assume that a paper drawer is installed on the e-STUDIO1208.
For some functions and procedures, the explanations assume that devices other than the above are installed.
The display screens, messages, and key names shown in the manual may differ from those on the actual machine
due to product improvements and modifications.
PRINTED IN CHINA
2020B KS1
TINSE5462FCZZ
estudio1208_us_sg.book 19 ページ ２０１９年１２月２５日 水曜日 午後１時５１分

DP-1058/1208
OME19002900
R191020W2400-TTEC
1-11-1, OSAKI, SHINAGAWA-KU, TOKYO, 141-8562, JAPAN
estudio1208_us_sg.book 20 ページ ２０１９年１２月２５日 水曜日 午後１時５１分