Toshiba 4300 series User manual

UNINTERRUPTIBLE POWER SYSTEM (UPS)
Part # 64524-003
June 2012
Manufactured in the USA
© Copyright 2012 TOSHIBA International Corporation
All rights reserved.
4300 SERIES
INSTALLATION AND OPERATION MANUAL
THREE PHASE - 30/50 KVA

4300 Series Installation and Operation Manual

4300 Series Installation and Operation Manual
UNINTERRUPTIBLE POWER SYSTEM (UPS)
INSTALLATION AND OPERATION MANUAL
THREE PHASE - 30/50 KVA
Part # 64524-003
June 2012
4300 SERIES

4300 Series Installation and Operation Manual
Product Use and Warranty Restrictions
The Toshiba products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, ofce equipment, measuring equipment, industrial robotics, domestic
appliances, etc.). These Toshiba products are neither intended nor warranted for usage in equipment that
requires extraordinarily high quality and/or reliability or where a malfunction or failure may cause loss
of human life or bodily injury (Unintended Usage). Unintended Usage includes atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, trafc signal instruments,
combustion control instruments, life-support equipment, all types of safety devices, etc. Unintended Usage
of Toshiba products listed in this document shall be made at the customer’s own risk.
NOTICE
PLEASE INFORM TOSHIBA INTERNATIONAL CORPORATION OR AUTHORIZED
REPRESENTATIVE IN CASE OF INCONSISTENCIES, OMISSIONS, OR QUESTIONS.
The instructions contained in this manual are not intended to cover all of the details or variations in
equipment, or to provide for every possible contingency concerning installation, operation, or maintenance.
Should further information be required or if problems arise which are not covered sufciently, contact your
Toshiba sales ofce.
The contents of this instruction manual shall not become a part of or modify any prior or existing agreement,
commitment, or relationship. The sales contract contains the entire obligation of Toshiba International
Corporation UPS Division. The warranty contained in the contract between the parties is the sole warranty
of Toshiba International Corporation UPS Division and any statements contained herein DO NOT create
new warranties or modify the existing warranty.
Any electrical or mechanical modications to this equipment without prior written consent of Toshiba
International Corporation will void all warranties and may void the UL/CUL listing. Unauthorized modications
can also result in personal injury, loss of life, or destruction of the equipment.
QUALIFIED PERSONNEL ONLY
Qualied Personnel are those who have the skills and knowledge relating to the construction,
installation, operation, and maintenance of the electrical equipment and have received safety
training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety
requirements).

4300 Series Installation and Operation Manual
UNINTERRUPTIBLE POWER SYSTEM (UPS)
Please complete the following information and retain for your records.
Unless otherwise specied, the warranty period for the UPS or UPS part is 36 months from the shipment
date (see Toshiba International Corporation bill of lading).
Unless otherwise specied, the warranty period for a UPS battery is 24 months from the shipment date (see
Toshiba International Corporation bill of lading).
JOB NUMBER
MODEL NUMBER
SERIAL NUMBER
APPLICATION
SHIPMENT DATE
INSTALLATION DATE
INSPECTED BY

4300 Series Installation and Operation Manual
Purpose
This manual provides information on how to safely install your Toshiba International Corporation power
electronics product. This manual includes a section of general safety instructions that describes the warning
labels and symbols that are used throughout the manual. Read the manual completely before installing,
operating, or performing maintenance on this equipment.
This manual and the accompanying drawings should be considered a permanent part of the equipment and
should be readily available for reference and review. Dimensions shown in the manual are in metric and/or
the English customary equivalent.
Toshiba International Corporation reserves the right, without prior notice, to update information, make
product changes, or discontinue any product or service identied in this publication.
Toshiba is a registered trademark of the Toshiba Corporation. All other product or trade references appearing
in this manual are registered trademarks of their respective owners.
Toshiba International Corporation shall not be liable for direct, indirect, special, or consequential damages
resulting from the use of the information contained within this manual.
This manual is copyrighted. No part of this manual may be photocopied or reproduced in any form without
the prior written consent of Toshiba International Corporation.
© Copyright 2012 Toshiba International Corporation
All rights reserved.
Printed in the U.S.A.
Toshiba Customer Support Center
Contact the Toshiba Customer Support Center for assistance with application information or for any
problems that you may experience with your Uninterruptible Power System (UPS).
Toshiba Customer Support Center
8 a.m. to 5 p.m. (CST) - Monday through Friday
USA Toll Free [phone]
Tel [phone]
Fax [phone]
You may also contact Toshiba by writing to:
Toshiba International Corporation
13131 West Little York Road
Houston, Texas 77041-9990
Attn: UPS Product Manager
For further information on Toshiba products and services, please visit our website at:
www.toshiba.com/ind

i
4300 Series Installation and Operation Manual
Contents
1 Introduction.................................................................................................1
2 General Safety Instructions.......................................................................2
2.1 Symbols..........................................................................................2
2.2 Signal Words ..................................................................................3
2.3 Qualied Personnel ........................................................................3
2.4 Factory Authorized Personnel.........................................................4
3 Important Safety Instructions....................................................................4
4 Safety Precautions .....................................................................................5
4.1 Disclaimer.......................................................................................5
4.2 General Maintenance .....................................................................5
4.3 Transporting....................................................................................6
4.4 Transporting By Forklift...................................................................7
4.5 Inspection/Storage..........................................................................8
5 Installation Precautions.............................................................................9
5.1 Wiring/Connection ..........................................................................11
6 Warning Labels...........................................................................................12
7 Storage/Operating Environment ...............................................................14
7.1 Storage Environment .....................................................................14
7.2 Operating Precautions....................................................................14
7.3 Maintenance Precautions ...............................................................16
8 Installation...................................................................................................17
8.1 Unpacking.......................................................................................18
8.2 UPS Clearance...............................................................................18
8.3 Anchor Bolts....................................................................................19
8.4 Power Cable Knockout Plates ........................................................20
8.5 UPS Parts Identication..................................................................21
9 UPS Wiring ..................................................................................................23
9.1 One-Line Diagram ..........................................................................23
9.2 Multiple Battery Cabinets................................................................25
9.3 30/50 kVA Terminal Blocks and Power Cables ...............................25
9.4 External Breakers ...........................................................................26
9.5 Grounding Wire...............................................................................26
10 Communication Interfaces ......................................................................27
10.1 Remote Contacts..........................................................................27
10.2 UPS LAN Shutdown Signal Operation .........................................28
10.3 RS-232C.......................................................................................28
10.4 RemotEye III Network Card..........................................................29
10.5 Optional Kickplate Installation.......................................................29
11 Specications ...........................................................................................30

ii 4300 Series Installation and Operation Manual
11.1 Specication Table ........................................................................30
11.2 Typical Efciency vs. Load............................................................32
11.3 Typical Thermal Loss vs. Load......................................................32
12 Operator Interface ....................................................................................33
12.1 Operator Controls .........................................................................33
12.2 Operator Controls - Light Emitting Diodes (LED)..........................34
12.3 Operator Controls .........................................................................35
12.4 Touch Screen Display...................................................................36
12.5 Header Bar ...................................................................................37
12.6 Footer Bar.....................................................................................37
12.7 Quick Access Toolbar ...................................................................38
12.8 4300 Menu Tree ...........................................................................40
12.9 Toolbar: Security ...........................................................................41
12.10 Toolbar: Buzzer ON/OFF ............................................................41
12.11 Toolbar: Touch ON/OFF ..............................................................41
12.12 Toolbar: QUICK VIEW ON/OFF..................................................42
12.13 Tab: Main ....................................................................................43
12.14 Tab: Monitor ................................................................................44
12.15 Tab: Setup...................................................................................46
12.16 Setup: Calibrating the Touchscreen............................................48
12.17 Tab: Record ................................................................................49
12.18 Tab: Help.....................................................................................50
12.19 4300 Parameter Denitions ........................................................51
12.20 System Fault Messages .............................................................57
12.21 System Warning Messages ........................................................58
12.22 System Mode Messages ............................................................60
12.23 System Status Messages ...........................................................60
13. UPS Operation .........................................................................................62
13.1 Initial UPS Startup ........................................................................62
13.2 Starting/Stopping the UPS............................................................63
13.3 Stopping the UPS .........................................................................63
13.4 Battery Backup Time and Discharge Process ............................64
13.5 Battery Low Voltage Tolerances ...................................................65
13.6 Audible Alarm Functions ...............................................................66
14 Options.....................................................................................................67
14.1 Ancillary Cabinets: Transformer, UPS, Battery. ...........................67
14.2 4300 Options ................................................................................67
15 External Layouts/Dimensions/Shipping Weights.................................68
Appendix A - Installation Planning Guide ......................................................71
Appendix B - Optional Kickplate Installation.................................................73

1
4300 Series Installation and Operation Manual
1 Introduction
This manual provides information on how to safely operate your 4300 Series Uninterruptible Power System
(UPS). This manual includes a section of general safety instructions that describes the warning labels and
symbols that are used throughout the manual. Read the manual completely before installing, operating, or
performing maintenance on this equipment.
Qualied personnel should read this manual carefully before transporting, installing, and wiring the UPS. In
addition they have a thorough understanding of the information provided in the chapters titled:
• General Safety Instructions
• Important Safety Instructions
• Safety Precautions
• Installation Precautions
Please read the 4300 Series Operation Manual for important instructions on operating the UPS. This
manual and the accompanying drawings should be considered a permanent part of the equipment and
should be readily available for reference and review. Dimensions shown in the manual are in metric and/or
the English customary equivalent.
Keep the Installation Manual and the Operation Manual near the UPS for necessary reference.
SAVE THESE INSTRUCTIONS

24300 Series Installation and Operation Manual
2 General Safety Instructions
DO NOT attempt to transport, install, operate, maintain or dispose of this equipment until you have read and
understood all of the product safety information provided in this manual.
2.1 Symbols
The symbols listed below are used throughout this manual. When symbols are used in this manual they will
include important safety information that must be carefully followed.
Safety Alert Symbol indicates that a potential
personal injury hazard exists.
Prohibited Symbol indicates DO NOT take action.
Mandatory Symbol indicates that the following
instruction is required.
Ground Symbol indicates the location of the
equipment grounding conductor.
Electrical - Voltage & Shock Hazard Symbol
indicates parts inside may cause electric shock.
Explosion Hazard Symbol indicates parts may
explode.

3
4300 Series Installation and Operation Manual
2.2 Signal Words
The signal words listed below are used throughout this manual. When the words DANGER, WARNING,
CAUTION and ATTENTION are used in this manual they will include important safety information that
must be carefully followed.
2.3 Qualied Personnel
Installation, operation, and maintenance shall be performed by Qualied Personnel Only. A Qualied
Person is one that has the skills and knowledge relating to the construction, installation, operation, and
maintenance of the electrical equipment and has received safety training on the hazards involved (Refer
to the latest edition of NFPA 70E for additional safety requirements).
Qualied Personnel shall:
• Have read the entire operation manual.
• Be familiar with the construction and function of the UPS, the equipment being driven, and the
hazards involved.
• Be trained and authorized to safely energize, de-energize, ground, lockout/tagout circuits and
equipment, and clear faults in accordance with established safety practices.
• Be trained in the proper care and use of protective equipment such as safety shoes, rubber gloves,
hard hats, safety glasses, face shields, ash clothing, etc., in accordance with established safety
practices.
• Be trained in rendering rst aid.
For further information on workplace safety visit www.osha.gov.
The word DANGER in capital letters preceded by
the safety alert symbol indicates that an imminently
hazardous situation exists, and if not avoided
will result in loss of life or serious injury to
personnel.
The word WARNING in capital letters preceded by
the safety alert symbol indicates that a potentially
hazardous situation exists, and if not avoided
may result in loss of life or serious injury to
personnel.
The word CAUTION in capital letters preceded by
the safety alert symbol indicates that a potentially
hazardous situation exists, and if not avoided may
result in minor or moderate injury.
The word NOTICE in capital letters without
the safety alert symbol indicates a potentially
hazardous situation exists, and if not avoided may
result in equipment and property damage.
NOTICE
CAUTION
WARNING
DANGER

44300 Series Installation and Operation Manual
2.4 Factory Authorized Personnel
Factory authorized personnel have been factory trained and certied to install, service, and repair the
UPS. Contact the Toshiba Customer Support Center for assistance in locating the factory authorized
personnel nearest you.
3 Important Safety Instructions
The following contains important instructions that should be followed during the installation, operation, and
maintenance of the 4300 Series UPS.
The UPS system input and output is NOT equipped with an over-current protection device, or an
output disconnect at the AC output. The user should provide circuit breakers between the UPS AC
input (or Bypass input) and the power sources and between the UPS output and the critical load input. The
minimum device ratings are listed in Table 3.1.
TABLE 3.1 UPS MINIMUM DEVICE RATINGS
CapaCity Rated Output input BReakeR Rating Output BReakeR Rating
30 kVA 208 V/120 V 208/120 V – 125 A 208/120 V – 125 A
50 kVA 208 V/120 V 208/120 V – 200 A 208/120 V – 200 A
The maximum operating ambient temperature for the UPS is 104 °F (40 °C) at 0.9 PF.
If the UPS is exposed to the same ambient temperature as the DC backup supply, the maximum operating
ambient temperature is:
• Battery backup: 90 °F (32 °C) at 0.9 PF. Table 3.2 lists the nominal battery voltage.
TABLE 3.2 UPS NOMINAL BATTERY VOLTAGE
CapaCity nOminal VOltage FlOat VOltage
30 kVA 288 Vdc 324 V
50 kVA 288 Vdc 324 V
CAUTION
Misuse of this equipment could result in personal injury and/or equipment damage.
In no event will Toshiba Corporation be responsible or liable for either indirect or
consequential damage or injury that may come from the use of this equipment.

5
4300 Series Installation and Operation Manual
4 Safety Precautions
The Toshiba products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, ofce equipment, measuring equipment, industrial robotics, domestic
appliances, etc.). These Toshiba products are neither intended nor warranted for use in equipment that, if
a malfunction or failure occurs, may result in loss of human life or bodily injury (collectively referred to as
“Unintended Usage”). Unintended Usage includes atomic energy control instruments, airplane or spaceship
instruments, transportation instruments, trafc signal instruments, combustion control instruments, medical
operating room or life support equipment, all types of safety devices, etc. Unintended Usage of Toshiba
products listed in this document shall be made at the customer’s own risk.
The application of the UPS without special consideration for equipment that supports human safety and/or
maintain public services may cause serious accidents.
4.1 Disclaimer
IN NO EVENT WILL TOSHIBA CORPORATION BE RESPONSIBLE OR LIABLE FOR EITHER INDIRECT
OR CONSEQUENTIAL DAMAGE OR INJURY THAT MAY COME FROM THE MISUSE OF THIS
EQUIPMENT. ANY MODIFICATIONS WITHOUT AUTHORIZATION BY TOSHIBA COULD RESULT IN
PERSONAL INJURIES, DEATH OR DESTRUCTION OF THE UPS.
TOSHIBA RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. TOSHIBA DOES NOT
ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR UPS
DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR
THE RIGHTS OF OTHERS.
4.2 General Maintenance
WARNING
DO NOT remove the rear/side panels, or any sheet metal not designed to be
removed.
Removing rear/side panels may result in electric shock, burns, personal injuries or
UPS failure.
Keep the area around the UPS clean.
Use a vacuum cleaner to clean the UPS.
Only factory authorized personnel should perform internal general maintenance
on the UPS.
Contact the authorized Toshiba Customer Support Center or an authorized
Toshiba representative for information on proper disposal of UPS components.
It is illegal to dispose of certain components without conforming to environmental
regulations for industrial/commercial waste.

64300 Series Installation and Operation Manual
4.3 Transporting
The UPS may be packed in a crate for extra protection during transportation. Avoid impact or vibration
against the UPS during transportation. DO NOT expose the UPS directly to water.
WARNING
DO NOT tilt the UPS more than 10° from upright position.
Tilting the UPS more than 10° may cause crushing, trapping or other
personal injuries.
CAUTION
DO NOT transport, move, store, or place the UPS on its side.
Excessive force applied from heavy components inside may damage
the UPS.
Avoid vibration or shock exceeding 0.5 g.
Failing to observe this precaution may cause damage to the UPS.
DO NOT allow the UPS to suffer shock or impact when unpacking.
Tools used to remove packaging materials may cause damage to the
UPS.
DO NOT install the UPS where water may fall on it.
Water may cause electrical shock, personal injury or UPS failure.
DO NOT push or pull on the sides of the packaging or the
UPS to move it. Always use a crane, forklift, or pallet jack for
transporting and positioning the UPS.
Pushing/pulling on the sides of the unit to move it may result in damage
to the UPS. (See Figure 4.1 Exterior Handling label.)

7
4300 Series Installation and Operation Manual
4.4 Transporting By Forklift
Refer to Chapter 15 - Weight and Dimensions.
Verify forklift maximum load capacity and ensure that the forks are long enough to properly support the
UPS. Insert the forks into the space shown in Figure 4.1. Spaces for the forks are provided underneath
the UPS.
DO NOT tilt UPS when lifting and/or transporting. Minimize the impact when lowering the UPS to the oor.
FIGURE 4.1 -TRANSPORTING UPS BY FORKLIFT
7 in. 7 in.13.7 in.
4300 Side View - Fork Access
Dimensions in Channel Base
Insert the forks here

84300 Series Installation and Operation Manual
4.5 Inspection/Storage
Inspection
Upon receipt of the UPS, an inspection for shipping damage should be performed. Use caution when
removing the unit from the pallet. Refer to labels or documentation attached to packing material.
Unpacking
Check the unit for loose, broken, bent or otherwise damaged parts. If damage has occurred during shipping,
keep all original crating and packing materials for return to the shipping agent.
NOTE: The factory warranty does not apply to damage incurred during shipping!
Ensure that the rated capacity and the model number specied on the nameplate conform to the order
specications.
Storage
During periods of non-use, the following guidelines are recommended for storage.
Storage Preparation
1) If the UPS has a battery backup, power up the UPS and allow it to operate with no
load for 24 hours to fully charge the batteries.
2) Stop the UPS.
3) Place the UPS Main Circuit Breaker switch in the “OFF” position.
Storage Conditions
• For best results, store the UPS in the original shipping container and place on a wood
or metal pallet
• Storage temperature range: -4 to 104 °F (-20 to 40 °C)
• The optimum storage temperature is 70 °F (21 °C). A higher ambient temperature will
require recharging more frequently during storage
Avoid the following storage locations:
• Locations that are subject to extreme temperature changes or high humidity
• Locations that are subject to high levels of dust or metal particles
• Locations that are subject to excessive vibration
• Inclined oor surfaces

9
4300 Series Installation and Operation Manual
CAUTION
Install the UPS in a controlled environment.
Improper storage and installation environment may deteriorate
insulation, shorten component life and cause malfunctions.
See Table 5.1 - UPS Installation Environment Standards
DO NOT tilt the UPS more than 10° from upright position.
Tilting the UPS more than 10° may cause crushing, trapping or other
personal injuries and cause physical damage to internal components.
WARNING
Keep the SPECIFIED CLEARANCE around the UPS.
Inadequate space around the UPS makes it difcult to perform
maintenance/inspections, will lead to insufcient ventilation, and/or
cause malfunctions.
Install anchor bolts to secure the UPS to the installation oor.
The UPS may fall during an earthquake if the anchor bolts are not
installed and secured.
Only factory authorized personnel should relocate, modify, or
replace parts in the UPS after initial installation.
Electrical shock, injury or UPS failure may occur if non-authorized
technicians attempt to modify or relocate the UPS.
Please contact Toshiba Customer Support Center if you plan to move
or make modications to the UPS
5 Installation Precautions

10 4300 Series Installation and Operation Manual
1) The UPS generates and can radiate radio-frequency energy during operation. Although
RFI noise lters are installed inside of the unit, there is no guarantee that the UPS will
not inuence some sensitive devices that are operating near by. If such interference
is experienced, the UPS should be installed further away from the affected equipment
and/or powered from a different source than that of the installed equipment.
2) The user should provide over-current protection for hardwired UPS systems between
the UPS output and the load input.
3) After ensuring that all power sources are turned “OFF” and isolated in accordance with
established lockout/tagout procedures, connect the power source wiring of the correct
voltage to the input terminals of the UPS.
NOTE: Ensure the input phasing is connected in clockwise rotation (CW). UPS internal
circuitry is designed to disable further UPS operation if the input phasing is
installed in counter-clockwise rotation (CCW).
4) Connect the output terminals of the UPS to the load (refer to NEC Article 300 - Wiring
Methods and Article 310 - Conductors For General Wiring). Size the branch circuit
conductors in accordance with NEC Table 310.16 as published 9/2008.
WARNING
METAL CONDUIT IS NOT AN ACCEPTABLE GROUND.
Conductor Routing and Grounding
1) Use separate metal conduits for routing the input power, output power, and control
circuits.
2) Follow the wire size and tightening torque specications.
3) Always ground the unit to reduce the potential for electrical shock and to help reduce
electrical noise.
4) A separate ground cable should be run inside the conduit with the input power, output
power, and control circuits.

11
4300 Series Installation and Operation Manual
5.1 Wiring/Connection
WARNING
Perform wiring and connections with correct polarity.
Be careful when connecting the UPS to the DC backup system. A
wrong connection may cause damage to the UPS, DC backup system,
or charger.
Connect ONLY one (1) ground wire to the earth ground terminal.
A missing ground wire may cause an electrical shock hazard.
Connecting to more than one ground may cause a ground loop.
See Chapter 9 - UPS Wiring
DO NOT force, bend, or pull wires.
DO NOT damage wire insulation.
DO NOT place heavy objects on top of UPS.
Observe the above precautions when making wire connections or
handling the wires. Failing to observe these precautions may damage
the insulation of the wires or may cause a re or an electric shock
hazard.
Follow the torque criteria for tightening screws.
Loose connections may cause re due to heating.
See Chapter 9 - UPS Wiring
NOTICE

12 4300 Series Installation and Operation Manual
6 Warning Labels
Below are representative warning labels and their location on the UPS.
FIGURE 6.1 – 50 KVA UPS WARNING LABELS
NOTICE
Make sure all the warning labels are installed in the appropriate locations.
If a label is missing or illegible, contact Toshiba Customer Support Center or an
authorized representative.
B
MATERIAL -VINYL ORPOLYESTER
TEMPERATURE-MINUS20 TO100deg.C
ADHESIVE-V23OREQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALSUSEDMUST
BEUL RECOGNIZED
WARNING AREA BACKGROUNDCOLOR: ANSIDANGERRED
WARNING AREA TEXT COLOR: ANSIWHITE
TEXT AREA BACKGROUNDCOLOR: ANSIWHITE
TEXT AREA TEXT COLOR: ANSIBLACK
CORNERRADUIS:VENDORSTANDARD
DANGER
Turnoffandlockoutallpowersources.
Waitatleastfive(5)minutesforpower
todissipatethencheckvoltagebefore
servicing.
Capacitorsstaychargedafterpower
hasbeenshutoff.
Accidentalcontactwithlivepartscan
causepersonalinjuryanddeath.
RISKOFELECTRICSHOCK
39561
1.50"
3.00"
WARNING AREA
TEXT AREA
THISMATERIAL IS THEEXCLUSIVEPROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
DANGERLABEL
CAPACITORS
39561
FULL
JK10-4-93
REV:
0
13131WEST LITTLE YORKROAD,HOUSTON, TX77041U.S.A.
TF10-15-04 TF10-15-04
C
PN 40830
Incorrect fuse replacement size
may result in fire or inadequate
equipment protection.
Replace only with same type
and rating of fuse.
WARNING
TEXT AREA
1.00"
1.75"
CRITICAL FUSE SIZING
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - V23 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI WARNING ORANGE
WARNING AREA TEXT COLOR: ANSI BLACK
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
WARNING
AREA
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
WARNING LABEL
PLP
40830
2=1
VB 3-28-94
REV:
0
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
TF 10-24-02 TF 10-24-02
D
40° AMBIENT
TEMPERATURE
0.50"
1.00"
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
TITLE: SCALE:
DRAWING NO.:
ECN DATE BY
DRAWN: CHECKED: APPROVED:
LABEL AMBIENT
40 C UPS ECC3°
39020
2=1
VB 8-10-93
REV:
0
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
PRINT: BLACK
UL RECOGNIZED MATERIAL: 2-3 MIL MATTE METALLIC POLYESTER
UL RECOGNIZED ADHESIVE: 3M 300 SERIES OR EQUIV..
TF 8-5-03 TF 8-5-03
A
Contact may result in burn injury.
PN 40832
Hot surface.
CAUTION
Allow equipment to cool before
servicing.
DANGER
Hazardous voltages are used in the operation
of this equipment and could cause severe personal
injury or loss of life.
The following precautions should be observed to
reduce the risk of injury or death.
HAZARDOUS VOLTAGES
Only qualified technicians familiar with this equipment and the
information supplied with it should be permitted to install and
operate this equipment.
Installation of electrical equipment must be done in
accordance with National Electrical Code and any other state
or local codes. Proper grounding and conductor sizing must
be installed for safe operation.
During operation, keep all covers in place and cabinet
doors shut.
When performing visual inspections and maintenance, if
possible, be sure the UPS is turned off and the incoming
AC feed is turned off and locked out.
If it is necessary to make measurements with the power
on, do not touch any electrical connection points. Remove
all jewelry from wrists and fingers. Make sure test equipment
is in good, safe operating condition.
While servicing, stand on some type of insulation, and be
sure not to be grounded.
Follow the safety instructions given in the equipment manual
carefully and observe all danger, warning and caution notices.
40308
The UPS and Battery Cabinet will have hazardous
voltages present even after the AC feed is turned off.