Triplett 8150-BR-KIT User manual

Thank you for purchasing the IP camera tester. Please read the manual before
using the IP camera tester.
Please first read the Safety Information carefully in the manual.
The manual should be kept with unit in case reference is needed.
Keep the S/N label for after-sale service within warranty period. Product without
S/N label will be charged for repair service.
If there is any question or problem while using the IP camera tester, or damage to
the product, please contact our technical department.
User Manual
V01.00
8150 CAMVIEW5 CCTV TESTER
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
1. Safety information .....................................................................................................1
2. IP Camera Tester Introduction ...................................................................................1
2.1 General ..............................................................................................................1
2.2 Packing list ........................................................................................................1
2.3 Function interface ..............................................................................................2
3. Operation ...................................................................................................................3
3.1 Installing the Battery .........................................................................................3
4. IP camera test .............................................................................................................3
4.1 Power output .....................................................................................................3
4.2 IPC Test pro ......................................................................................................4
4.3 IP discovery.......................................................................................................4
4.4 Rapid ONVIF test .............................................................................................5
4.5 Non-Onvif IP camera test ..................................................................................8
5. Analog camera test ....................................................................................................9
5.1 CVBS ................................................................................................................9
5.2 Auto HD ............................................................................................................9
5.3 CVI camera test ............................................................................................... 10
5.4 TVI camera test ............................................................................................. 111
5.5 AHD camera test ............................................................................................. 12
6. Other functions ........................................................................................................ 12
6.1 Network tool ................................................................................................... 13
6.2 RJ45 cable TDR test ........................................................................................ 14
6.3 Cable Tester .................................................................................................... 14
6.4 PoE power / DC12V 3A power output ............................................................ 15
6.5 Update ............................................................................................................. 16
6.6 File explorer .................................................................................................... 16
6.7 System Setting ................................................................................................. 17
6.8 HDMI out (*Optional) .................................................................................... 19
7. Specifications ........................................................................................................... 19
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
1
1. Safety information
The tester is intended for use in compliance with the local rules for electrical testers.
To prevent the functional failure, the product should not come in contact with water.
The exposed part of the tester should not be exposed to any liquids.
During transportation and use, avoid vibration of the tester.
Do not leave the tester unattended while charging. If the battery becomes overheated, the tester should be immediately removed from the
electrical source. The tester should not be charged over 6 hours.
Do not use the tester in high humidity conditions. Once the tester becomes damp, power off immediately.
The tester should not be used in an environment with the flammable gas.
Do not disassemble the instrument. There are no user replaceable parts inside.
The instrument should not be used in an environment with strong electromagnetic interference.
Do not touch the tester with wet hands.
Do not use detergent to clean the unit. A dry cloth is recommended. If the dirt is not easy to remove, a damp cloth with water can be used.
2. IP Camera Tester Introduction
2.1 General
The 5.4-inch IPS touch screen IP camera tester is designed for maintenance and installation of IP cameras, analog cameras, TVI, CVI,
AHD, SDI/EX-SDI cameras, as well as testing 4K H.264 /4K H.265 camera by mainstream. The 1920x1152 resolution enables it to display
a high resolution image from the camera. The meter supports many ONVIF and analog PTZ controls. The combination of touch screen and
touch control keys make the IP camera tester very user- friendly.
2.2 Packing list
1) Tester
2) Adaptor DC12V 1A
3) Network cable tester
4) Lithium ion battery
5) BNC cable
6) RS485 cable
7) RJ45-BNC converter (Only for optional function cable tracer)
8) DC12V Power cable
9) Audio cable
10) Safety cord
11) Wrist belt
12) Tool bag
13) Manual
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
2
2.3 Function interface
1 Menu key
2 Confirm key
3 Return: Return or cancel while setting parameters of the menu
4 4x zoom the image display
5 LED light
6
The RS485 data transmission and received indicator lights red while the data is
being transmitted or received.
7 The power indicator lights red while the tester is powered on by the adapter
Top interface
Bottom interface
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
3
8 Press more than 2 seconds to turn on or off, short press to turn on or off the menu display
9 Micro SD card removeable, supports up to 32G
10 DC12V 3A power output, temporarily supply power to the camera
11 PoE power supply output/LAN test interface
12 HDMI output
13 Video image /AHD/TVI/CVI signal input BNC interface
14 LED lamp
15 DC 12V 1A charging interface
16 RS485 Interface: RS485communication for PTZ control
17 Audio input
18 UTP cable port: UTP cable tester port/ Cable tracer port (Optional)
3. Operation
3.1 Installing the Battery
The tester has a built-in lithium ion rechargeable battery. The battery should be disconnected for safety during transportation!
Prior to the use of the instrument, please remove the battery insulation paper. Pressing the key to power on /off the tester.
Notice: Please use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off, battery charging is completed.
Notice: When the Charge Indicator turns off, the battery is approximately 90% charged. Charging time can be extended for about
1 hour and the charging time under 12 hours will not damage the battery.
Notice: Press the key several seconds to restore the default settings when the instrument works abnormally.
Notice: While Charging, someone must be present.
4. IP camera test
4.1 Power output
Camera can be powered from the DC 12V/3A output or by Power over Ethernet.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
4
4.2 IPC Test pro
Camera test often needs to open multiple apps, "IPC TEST PRO" app, using new technology and combing multiple functions into one APP,
can increase efficiency.
Application:
Support multi-segment IP address scan, can visually display camera brand, click IP address to display the image. Can supply the power to
PoE camera.
Real-time display network port connection status.
Use one key to connect camera test tool, browser can login and configure camera.
Batch activate Hikvision and Dahua cameras.
4.3 IP discovery
Press IP discovery , tester to auto-scan the entire network segment IP, as well as auto-
segment with the scanned camera's IP. The meter auto-search the entire network segment IP, and auto-add the IP from different network
segments.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
5
Local IP: auto- .
Discovery IP: is connected to the tester directly, the
IP address, if the tester connects to Local Area Network, it displays the current IP address.
Start: .
ONVIF: Rapid ONVIF Quick link.
IPC TEST: IPC TEST Quick link, Non-OnVIF IP camera test.
4.4 Rapid ONVIF test
Rapid ONVIF can dis s mainstream.
The meter auto-scans all ONVIF cameras in different network segments. It lists cameras name and IP address on the left of screen. Tester
can auto login camera and display camera image. Factory default uses admin password to auto login, if you modified the password, then
default uses the modified password to login.
the tester will scan the ONVIF camera again. Click the
Th
Pop-up settings menu when you icon in the upper left corner.
Across network segments scan: After opening this function, Rapid ONVIF function can scan across network
IP.
Auto Login: After opening this function, the tester can auto login camera and display camera image (The login default password is
"admin")
Video transmission protocol: UTP and TCP protocol.
Show focus Info: Focus Information.
View manual: Opens the Manual.
Restore Defaults: Restore .
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
6
Confirm: Save the modified parameters.
icon to open camera setting.
ge to access the following tools: Snapshot, Record, Photo,
Playback, Lens simulation, PTZ and Settings.
Network setting: the IP address. Some cameras cannot support change IP address, so there is no change
after saving.
When using the network video input, the tester supports resolutions up to 1080p, the input image remains clear after it is enlarged. This is
helpful to termine
Lens simulation: Simulate different lenses display area. Supported lens: itable camera
lens.
OSD Menu: Select OSD and popup the OSD menu. include time, channel name and other optional items.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
7
After selecting a channel, you can edit the channel name, modify the display position, and switch the font size. S Content location -
D. e
Click to save the modification. Press return key or click any area on the screen to return to the previous interface.
Video files can play in the Video player on the main menu.
PTZ
Set preset position: Move the camera to preset position, enter the preset number on the bottom right corner to complete position preset.
Call the preset position: Select the preset number on the left, click "Call" to call preset.
PTZ speed set: Horizontal and Vertical speed set.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
8
Doc: Click "Create , to create a test report document for the camer
Enter the camera test information, click "Create Document" to complete the report.
Click doc menu again, you can preview the report document.
Icons description: The description of function icons on the bottom toolbar.
4.5 Non-OnVIF IP camera test
Display image from the 4K H.265 camera by mainstream.
Note: Currentl cific IP cameras, these include specific models made by ACTI,
AXIS, Dahua, Hikvision, Samsung, and many more. If the camera is not fully integrated, please use the ONVIF or RTSP apps.
Local IP: This is t .
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
9
IP camera type: Click on the IP Camera type to select the manufacturer and model number of the connected IP camera.
Manual: Click IP camera type, list Honeywell, Kodak, Tiandy, Aipu-waton, ACTi, WoshiDA IP camera etc. If the brand has official
original protocols, pls select camera type, input IP camera address, username and password, click
display interface.
Stream code: When testing the s not been started,
it will prompt switch to manual selection.
IP Camera's IP: Enter the IP cam h -scan for the
directly connect the IP camera to the tester so the search results w
IPC Port: When you select the IP camera type, it will def does not need to be changed.
.
5. Analog camera test
5.1 CVBS
Analog camera test and PTZ control.
Check and set the protocols, address, interface and baud, all must be consistent with the dome camera for the tester to work. After setting
the parameter, the tester can control the PTZ and lens.
5.2 Auto HD
Automatically recognize type and resolution of TVI/CVI/AHD camera and display an image.
Support coaxial PTZ and call OSD menu. Support CVBS and 8MP TVI/CVI/
AHD cameras. Select relative function on the right
.
Double tap on the screen to display in full screen.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
10
5.3 CVI camera test
When HD CVI signal input, the tester will display the image resolution at the top of the screen. Double tap on the screen to display the
image in full screen.
The tester supports resolution up to 3840 x 2160P 12.5/15 FPS.
1 PTZ control
1.1 Coaxial PTZ control
Click the icon on the right toolbar to do the corresponding setting.
Enter PTZ address to perform parameters setting.
The PTZ address in the tester must be consistent with the dome camera or decoder for the IPC tester to work. After setting the
parameter, the tester can control the PTZ and lens.
Set preset position:
Move the PTZ camera to the preset position, t lete set preset position.
Call preset position:
.
1.2 RS485 control
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
11
2 Coaxial camera menu setting
or click the icon to call the dome camera menu.
set the parameters by
5.4 TVI camera test
When using an HD TVI signal input, the tester will display the image resolution at the top of the screen. Double tap on the screen to display
the image in full screen.
The tester supports resolution up to 3840 x 2160P 12.5/15 FPS.
Coaxial camera menu settings:
Tap MENU .
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
12
Input calling dome camera menu address code, after finishing the parameter settings, you can press the key or click the icon to
call the dome camera menu.
5.5 AHD camera test
When using an AHD signal input, the tester will display the image resolution at the top of the screen. Double tap on the screen to display
the image in full screen.
The tester supports resolution up to 3840 x 2160P 15 FPS.
(1) Coaxial PTZ control
UTC control: S - (AHD camera has two different order, if the not working, -
To use coaxial PTZ control with the AHD camera, no parameter settings are needed.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
13
6.1 Network tool
(1) IP address scan
Connect the cable to the LAN port, click icon to enter, set your IP address search range by changing the Start and End IP addresses.
pen ports.
(2) PING Test
Application: PING testing is the most conventional network debugging tool. It is used for testing if the connected. IP camera or other
normally, and the IP address is correct.
It is normal that the first data packet will be lost when testing starts.
(3) Network test (Ethernet bandwidth test)
To use the Network tester, you will need two IP testers. One is used as a Server and the other as a Client. In order to communicate, both
devices must be on the same network segment.
(4) Port Flashing
Application:
The tester will send special signals to make the connected LAN port flicker at special frequency, which will aid the installer in finding the
connected Ethernet cable easily and quickly. This function can prevent mistakenly inserting or disconnecting the wrong cable and
interrupting network connection.
(5) DHCP server
he network
settings. Clic
check your Client list.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
14
(6) Trace route
It is used to determine the path of the IP packet access target.
Note: Trace route testing results only for reference, for accurate test route tracking, use a professional Ethernet tester.
(7) Link monitor
This app is used to see if an IP address is occupied by other network devices. This will avoid new address conflicts.
6.2 RJ45 cable TDR test
Connect cable to teste
Single test: Test cable status, length and attenuation.
Repeat test: Continue to test cable status, length and attenuation.
Status: After link-up, the screen displays or for an open circuit, the screen displays the cable pair has a short
circuit, the screen displays
Length: The max test length is 180 meters, when the cable is open circuit or short circuit, can test the cable length, if screen display
uld not be accurate.
Cable quality test: Green is good quality cable, Yellow is poor quality cable, Red is water damaged cable, the attenuation value will be
displayed when a cable is over 10 meters.
Advanced Test: Test cable pair status, length, attenuation, reflectivity, impedance, skew and other parameters.
Attenuation reflectivity: After link-up, if the reflectivity value is 0, it is the best quality communication
Impedance: After link-up, if the impedance value is 10 it is the best quality communication, the range is generally in 85-
Skew: After 1000M link up, if the skew value is 0ns, it is the best quality communication, if over 50ns, it will cause a Bit Error Rate in the
transmission.
the instruction of all parameters.
6.3 Cable Tester
Click icon to enter.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
15
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence
of wires as well as the serial number of the cable tester kit will be displayed.
The number of the cable tester is 255.
Quickly detect the near-end, mid-end and far-end fault point of RJ45 cable connector
Cable test:
Tap "Diagram of the cable sequence", pop up the connection diagram of Straight-through cable and crossover cable. You can then create a
test report.
6.4 PoE / DC12V 3A power output
When the tester is turned on, the DC12V power output functions are automatically turned on.
To use the PoE Pow
The IP camera needs to connect the LAN port before you turn on PoE Power. If the IP camera supports PoE, the PoE power is delivered via
pins 1, 2, 3, and 6 on the on.
Note:
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
16
1. Do not 3
2. Do not output the DC12V/3A power into the DC12V/IN port of the IP camera tester.
3. The IPC tester power output is close to 3 3A, the tester will auto enter protection mode. Disconnect all
tester connections and then connect the tester with the power adaptor to continue.
4. Before turning on the PoE power output, make sure the IP camera supports PoE power. Otherwise it may damage the IP camera.
5. Before turning on PoE power output, connect the IP camera to the LAN port of tester.
6. Make sure the tester is full charged or more than 80% charged, or it
6.5 Update
Copy the downloaded update file to SD card "update" directory, if there is no directory, please create one.
Click the icon to heck for
updates on the internet. If there are applications that need updating, the applications will be listed in the interface, click related applications,
update to the latest version.
Online update: Connect the Internet to update the apps.
App management: This can uninstall and open APP.
6.6 File explorer
on the top toolbar, to select internal or external storage. Click on the upper right corner Icon , to select other operations
from the menu or exit.
Browse
It includes Music, Videos, Pictures, Documents, zip file etc.to conveniently view and manage.
FTP server
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
17
You can choose internal or external SD card.
For other operation details, refer to FTP settings.
6.7 System Setting
Language: Select your desired language: English, Chinese, Korean, Russian, Italian, Polish, Spanish, French or Japanese.
Typewriting: You can select typewriting or install other typewriting:
Date/Time: Set the Date/time of the IP tester.
IP setting: Manually set the IP address, Subnet Mask, Defau
.
WLAN Net: ton. Once WiFi is turned on, click connected WIFI, to scan for
wireless networks in your area.
l seconds, to set static IP address.
Wi-Fi hotspot: I to create Wi-Fi hotspot.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CCTV TESTER User Manual
18
Brightness: Set the desired brightness of the IP tester and adjust the sleep time settings.
Volume: Set volume level
SD Card: Displays SD Card Capacity. You can also format the SD card or unmount it before removing it.
FTP server: Once the IP tester connects to a network, a computer can be used to read the SD card files via FTP.
ll enable the PC to read, copy and edit the files
from the SD card without the use of SD card reader.
Version information: Shows applications version information, press any apps icon several seconds to uninstall.
Screen display rotation: splay 180 degrees. This function is very convenient for the
user to connect the LAN cable on the bottom of the unit without having to flip the unit itself.
PTZ address scan: You can toggle the PTZ Address scan off or
order to use the PTZ Scan feature of the PTZ app.
Lock Screen: .
Restore the factory settings: If the tester is restored to factory settings, all of your personal files and apps will be removed.
Power Off: Manually set Auto Off time (0-23h 59min).
Button mode selection: It can select button mode .
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]