Triton ENVI Setup guide

Quick-Start User Guide
2181684A

ENVi®Controller Layout
Menu Controls
COLD Control ECO Control
Start/Stop Control
Increase Showering
Water Temperature
Display Area
Decrease Showering
Water Temperature

Once Commissioned, and upon connecting ENVi®to power, the Start/Stop
icon on the controller is illuminated, touch it to start showering. The
shower temperature and timer will be set to their default values.
Switching the Shower On

Showering Controls
Touch the or icons to change the shower temperature.
Touch the icon to run the shower at ambient water temperature.
Touch the icon to decrease the shower timer by one minute.

Touch the circular symbols under the left and right chevrons to
browse and the circular symbol under the tick to select between six
User Proles. Upon selecting a User Prole, the shower will automatically
adjust the shower temperature and timer to the personalised settings.
ENVi® Mode and User Proles

Once the timer has elapsed, or if the Start/Stop icon is touched whilst
showering, ENVi®will enter phased shut down, which protects the Tri-HUB
by purging it of hot water before turning fully o.
Switching the Shower O

Touch and hold the Start/Stop icon for ve seconds whilst ENVi®is in
Standby to enter the System Settings. Touch the circular symbols under
the Up and Down chevrons to browse System Settings Menu, and
use the circular symbol under the tick to select the option.
Press the Start/Stop icon to return to Standby.
System Settings

Scan for ENVi®
Product Support Page
tritonshowers.co.uk/envisupport
Or call our Customer Experience team:
02476 372 222
ENVi®Product Support