True TPP-60D-2 User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TPP-60D-2
TPP-60D-2
Model
Doors/
Drawers
Capacity
(Cu. Ft.)
(liters) Shelves
Pans
(top)
Cabinet Dimensions
(inches)
(mm)
L** D†H* HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TPP-60D-2 1/2 15.9
451
2860
1/4
1531
321/4
820
353/4
909
1/3
1/3
115/60/1
230-240/50/1
7.9
4.2
5-15P
▲
7
2.13
420
191
** Length does not include 3/8 " (10 mm) each side for lid pins and 1/4 " (7 mm) each side for cutting board brackets and thumb screws.
†Depth does not include 1
" (26 mm) for rear bumpers and 3 " (77 mm) for cutting board.
* Height does not include 61/4 " (159 mm) for castors or 6 " (153 mm) for optional legs. ▲Plug type varies by country.
9/07
R
True’s pizza prep tables are
designed with enduring quality
that protects your long term
investment.
Oversized, environmentally
friendly (R134A) forced-air
refrigeration system holds 33°F to
41°F (.5°C to 5°C).
Complies with and listed under
ANSI/NSF-7-1997-6.3.
All stainless steel front, top
and ends. Matching aluminum
finished back.
Stainless steel, patented, foam
insulated flat lids keep pans
temperatures colder, lock
in freshness, and minimize
condensation.
Extra-deep 191/2" (496 mm) full
length removable cutting board
included. Sanitary, high-density,
NSF approved white polyethylene
provides tough preparation
surface.
Heavy duty PVC coated wire
shelves (door section).
Each drawer accommodates two
(2) full size12"L x 20"W x 8"D
(305 mm x 508 mm x 204 mm)
pans (sold separately).
Foamed-in-place, high density
polyurethane insulation (CFC
free).
Pizza Prep Table:
Solid Door and Drawered Refrigerator
®
Drawer assemblies can be located in any section of the cabinet.
Location of drawers/doors must be indicated at time of ordering.

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
255/8"
(651 mm)
1/4"
(7 mm)
TPP-60D-2 TFQY72E TFQY43S TFQY72P TFQY723
TPP-60D-2
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder
product temperatures, lower utility costs,
exceptional food safety and the best value in
today’s food service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained capillary
tube system using environmentally friendly
(CFC free) R134A refrigerant.
• Oversized, factory balanced refrigeration
system with guided airflow to provide
uniform temperature in food pan rail and
cabinet interior.
• Forced-air design holds 33°F to 41°F
(.5°C to 5°C) product temperature in food
pans and cabinet interior. Complies with and
listed under ANSI/NSF-7-1997-6.3.
• Condensing unit accessed from front
behind removable panel, slides out for easy
maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel front, top and ends.
Matching aluminum finished back.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless floor
with coved corners.
• Insulation - entire cabinet structure, solid
door, and drawer facings are foamed-
in-place using high density, CFC free,
polyurethane insulation.
• 5" (127 mm) diameter stem castors. 36" (915
mm) work surface height.
DOOR/DRAWERS
• Door constructed of stainless steel exterior
with white aluminum liner to match cabinet
interior. Drawers have stainless steel exterior
facings and liners with stainless steel frames.
• Each door and drawer fitted with 12"
(305 mm) long recessed handle that is
foamed-in-place with a sheet metal interlock
to ensure permanent attachment.
• Heavy duty stainless steel drawer slides and
rollers. Removable without tools for easy
cleaning.
• Positive seal door swings within cabinet
dimensions.
• Magnetic door/drawer gaskets of one piece
construction, removable without tools for
ease of cleaning.
• Door or drawer assemblies can be located
in any section of the cabinet. Location of
door/drawers must be indicated at time of
ordering.
SHELVING
• Two (2) adjustable, heavy duty PVC coated
wire shelves 171/4"L x 28"D (439 mm x
712 mm). Four (4) chrome plated shelf clips
included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
DRAWER PAN CAPACITY
• Each drawer accommodates two (2) full size
12"L x 20"W x 8"D (305 mm x 508 mm x 204
mm) food pans (sold separately). Drawers
will support varying pan configurations with
pan dividers bars (drawer pans and divider
bars optional).
MODEL FEATURES
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• Extra-deep 191/2" (496 mm) full length
removable cutting board included.
Sanitary, high-density, NSF approved white
polyethylene provides tough preparation
surface.
• Stainless steel, patented, foam insulated flat
lids keep pans temperatures colder, lock in
freshness and minimize condensation.
• Refrigerated pan rail comes standard with
eight (1/3size) 123/4"L x 61/4"W x 6"D
(324 mm x 159 mm x 153 mm) NSF approved
clear polycarbonate insert pans.
• NFS-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord and
plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒6" (153 mm) standard legs.
❒6" (153 mm) seismic/flanged legs.
❒ 4" (102 mm) diameter castors.
❒ 3" (85 mm) diameter castors.
❒ 2 1/2" (64 mm) diameter castors.
❒ Garnish rack.
❒ Pizza prep service shelf.
❒ Single utility shelf.
❒ Double utility shelf.
❒ Half bun tray rack (door section only).
❒ 191/2" (496 mm) deep, 1/2" (13 mm) thick,
white polyethylene cutting board.
❒ 191/2" (496 mm) deep, 1/2" (13 mm) thick,
composite cutting board.
❒ Pan dividers.
❒ Exterior round digital thermometer (factory
installed)
❒ Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant). Consult factory technical service
department for BTU information.
115/60/1
NEMA-5-15R
RIGHT VIEW
Pizza Prep Table:
Solid Door and Drawered Refrigerator
PAN LAYOUT
417/8"
(1064 mm)
321/4"
(820 mm)
355/32"
(893 mm)
587/8"
(1496 mm)
1"
(26 mm)
183/8"
(467 mm)
4911/16"
(1263 mm)
25/8"
(67 mm)
39/16"
(91 mm)
ELEVATION
123/4"
(324 mm) 81/4"
(210 mm)
601/4"
(1531 mm)
3511/16"
(907 mm)
293/4"
(756 mm)
63/16"
(158 mm)
3515/16"
(913 mm)
1/16"
(2 mm)
each side
for Lid Pins
1/4"
(7 mm)
each side for
Cutting Board
Brackets and
Thumb Screws
5"
(127 mm)