FEATURES/BENEFITS
TA2H-2S
TA1H-1S TA2HPT-2S-2S
True Heated
Cabinets are
designed to hold
warm baked or
cooked food.
Cabinets are not
designed to heat
ambient or cold
product.
Parts Department • 1-800-424-TRUE True Website: www.truemfg.com
Toll Free Number • 1-800-325-6152
TA Series
•Powerfully provides holding tempera-
tures of 80°F to 180°F throughout the
cabinet for uniform, forced-air, heating.
•Low velocity fan(s) provided to assure
even temperature throughout cabinet. A
vent is located at the top of the cabinet
for positive humidity control.
•Heater - stainless steel for corrosion
resistance.
•Shelving - (3) heavy duty, chrome shelves
per section with wall mounted pilasters
(3) different interior kits available. (field
installation required).
•Exterior - 300 series stainless steel
front, sides, bottom and back (the fin-
est stainless available).
•Anodized aluminum interior.
•Foamed-in-place polyurethane high den-
sity cell insulation (CFC free).
•Exterior mounted, color coded, tempera-
ture monitor.
•Lifetime guaranteed recessed door
handles standard.
•Door locks standard.
•Doors equipped with lifetime guaranteed
self-closing hinges with 90 degree stay
open feature standard.
•Humidity control - 12” x 20” pan stan-
dard.
•Manual humidity control is a standard
feature (turn counterclockwise to ventilate).
•Incandescent interior lighting.
•6” legs standard equipment. 4” diameter
swivel castors available for single section
models only.
•Pass-thru heated cabinet designed to be
rear-loaded from prep area and front
accessed.
•Self-contained system.
* Height does not include 6” for leg height or 5” for optional castors (castors available on single
section models only).
* Height does not include 1” for system mechanical components.
‡Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: TA2HPT-2S-2S requires hard wiring.
* Height does not include 6” for leg height or 5” for optional castors (castors available on single
section models only).
* Height does not include 1” for system mechanical components.
‡Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: TA2H-2S requires hard wiring.
Pass-Thru Heated Cabinets
Model Swing
Doors Cu.
Ft. Watts Crated
Weight
Cabinet Dimensions
L D H*
SOLID DOORS
TA1HPT-1S-1S ‡ 2 31 2000 400 29 x 371
/
4x 781
/
4
TA2HPT-2S-2S ‡ 4 56 4000 600 513/8x 371
/
4x 781
/
4
All dimensions rounded up to the nearest 1/8”.
Reach-In Heated Cabinets
Model Swing
Doors Cu.
Ft. Watts Crated
Weight
Cabinet Dimensions
L D H*
SOLID DOORS
TA1H-1S ‡ 1 31 2000 350 29 x 343
/
4x 781
/
4
TA2H-2S ‡ 2 56 4000 565 513/8x 343
/
4x 781
/
4
All dimensions rounded up to the nearest 1/8”.
Curb mountable units for TR, TA & TG series only. (5% list upcharge)
