FEATURES/BENEFITS
Parts Department • 1-800-424-TRUE True Website: www.truemfg.com
Toll Free Number • 1-800-325-6152
TG Series
TG2H-2S
TG1H-1S TG2HPT-2S-2S
•Powerfully provides holding tempera-
tures of 80°F to 180°F throughout the
cabinet for uniform, forced-air, heating.
•Low velocity fan(s) provided to assure
even temperature throughout cabinet. A
vent is located at the top of the cabinet
for positive humidity control.
•Heater - stainless steel for corrosion
resistance.
•Shelving - (3) heavy duty, chrome shelves
per section with wall mounted pilasters
(3) different interior kits available. (field
installation required).
•300 series stainless steel doors and
front (the finest stainless available).
•Anodized quality aluminum sides, bottom
and back.
•Anodized aluminum interior.
•Foamed-in-place polyurethane high den-
sity cell insulation (CFC free).
•Exterior mounted, color coded, tempera-
ture monitor.
•Lifetime guaranteed recessed door
handles standard.
•Door locks standard.
•Doors equipped with lifetime guaranteed
self-closing hinges with 90 degree stay
open feature standard.
•Humidity control - 12” x 20” pan stan-
dard.
•Manual humidity control is a standard
feature (turn counterclockwise to ventilate).
•Incandescent interior lighting.
•6” legs standard equipment. 4” diameter
swivel castors available for single section
models only.
•Pass-thru heated cabinet designed to be
rear-loaded from prep area and front
accessed.
•Self-contained system.
True Heated
Cabinets are
designed to hold
warm baked or
cooked food.
Cabinets are not
designed to heat
ambient or cold
product.
* Height does not include 6” for leg height or 5” for optional castors (castors available on single
section models only).
* Height does not include 1” for system mechanical components.
‡Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: TG2HPT-2S-2S requires hard wiring.
* Height does not include 6” for leg height or 5” for optional castors (castors available on
single section models only).
* Height does not include 1” for system mechanical components.
‡Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: TG2H-2S requires hard wiring.
Pass-Thru Heated Cabinets
Model Swing
Doors Cu.
Ft. Watts Crated
Weight
Cabinet Dimensions
L D H*
SOLID DOORS
TG1HPT-1S-1S ‡ 2 31 2000 400 29 x 371
/
4x 781
/
4
TG2HPT-2S-2S ‡ 4 56 4000 600 513/8x 371
/
4x 781
/
4
All dimensions rounded up to the nearest 1/8”.
Reach-In Heated Cabinets
Model Swing
Doors Cu.
Ft. Watts Crated
Weight
Cabinet Dimensions
L D H*
SOLID DOORS
TG1H-1S ‡ 1 31 2000 350 29 x 343
/
4x 781
/
4
TG2H-2S ‡ 2 56 4000 565 513/8x 343
/
4x 781
/
4
All dimensions rounded up to the nearest 1/8”.
Curb mountable units for TR, TA & TG series only. (5% list upcharge)
