True TA1H-2HS User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TA1H-2HS
TA1H-2HS
Model Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions
(inches)
(mm)
LD
†H*Watts Voltage
NEMA
Config.
Cord Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TA1H-2HS 2 31
878
29
737
345/8
880
781/4
1988
2000 115/208-240/60/1 14-20P 9
2.74
n/a
n/a
†Depth does not include 11/8
" (29 mm) system mechanical components.
*Height does not include 61/8
" (156 mm) for legs, 5 " (127 mm) for optional castors and 1 " (26 mm) for system mechanical components.
Requires 115/208 -240/60 Hz, single phase, 3 pole, 4 wire circuit.
5/07
Provides cabinet holding
temperature of 80°F to 180°F
(26.6˚C to 82.2˚C).
Equipped with low-velocity fans
to assure even temperature
distribution throughout the
cabinet. Fans are controlled by
exterior on/off switch.
Two (2) stainless steel (for
corrosion resistance), finned
tube heating elements (1000
watts each) for uniform
generation of electric heat.
Cabinet comes with a total of
2000 watts.
300 series stainless steel exterior
front, sides, back and bottom.
The very finest stainless with
higher tensile strength for fewer
dents and scratches.
Anodized aluminum interior
cabinet liner. 300 series stainless
steel door liners and floor with
coved corners.
Three (3) adjustable, heavy duty
chrome plated wire shelves.
Positive seal self-closing doors
with 120° stay open feature.
Lifetime guaranteed door hinges
and recessed door handles.
Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.
R
TA Specification Series:
Reach-In Solid Half Door Heated Cabinet
®

STANDARD FEATURES
Model:
WARRANTY
One year warranty on all parts
and labor (U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com
TA1H-2HS TFQX179E TFQX179S TFQX60P TFQX1793
TA1H-2HS
DESIGN
• True’s solid door reach-in heated cabinets are
designed with enduring quality that protects
your long term investment.
HEATER SYSTEM
• Cabinet designed to provide holding
temperatures of 80°F to 180°F (26.6°C to
82.2°C). Heating system controlled by exterior
on/off switch and temperature control dial.
• Two (2) stainless steel (for corrosion resistance),
finned tube heating elements (1000 watts
each) for uniform generation of electric heat.
Cabinet comes with a total of 2000 watts.
• Equipped with low-velocity fans to assure
even temperature distribution throughout the
cabinet. Fans are controlled by exterior on/off
switch.
• Manually controlled vent located on top of the
cabinet for positive humidity control.
• 12" x 20" (305 mm x 508 mm) pan for water
included, if additional humidity required.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel doors, front,
sides, back and bottom.
• Interior - NSF approved anodized aluminum
side walls and back liner. 300 series stainless
floor with coved corners.
• Insulation - entire cabinet structure and solid
doors are foamed-in-place using high density,
CFC free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with 6" (153 mm) stainless
steel legs.
DOORS
• 300 series stainless steel exterior and liners.
Doors open within cabinet dimension.
• Door locks standard.
• Lifetime guaranteed recessed door handles.
Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
• Positive seal self-closing doors with 120° stay
open feature. Lifetime guaranteed door
hinges.
• Magnetic door gaskets of one piece
construction, removable without tools for ease
of cleaning.
SHELVING
• Three (3) chrome shelves 25" x 273/4"
(635 mm x 705 mm) with shelf clips and wall
mounted pilasters (field installed). 11/16"
(27 mm) standoff ensures optimum airflow.
• Aluminum shelf support pilasters. Shelves are
adjustable on 1/2" (13 mm) increments.
• Three (3) different interior kits available (see
Kit Options). Pilasters and tray slides require
field installation.
LIGHTING
• Incandescent interior lighting - lights activated
by exterior on/off switch, safety shielded.
MODEL FEATURES
• Exterior, color coded, dial thermometer;
accurate direct reading of internal cabinet
temperature.
• Designed to hold warm baked or cooked food.
Cabinet is not designed to heat ambient or
cold product.
• NSF-4 compliant for open food product.
ELECTRICAL
• True requires that a sole use circuit be
dedicated for the unit.
• Unit completely pre-wired at factory and ready
for final connection to a 115/208-240/60 Hz.
single phase, 20 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒Seismic/flanged legs.
❒4" (102 mm) diameter stem castors.
❒Stainless steel rail skirt for use with legs (field
installed).
❒Additional shelves.
❒Stainless steel (electro polished) shelves.
❒Metal door handles (factory installed).
❒Electronic temperature control (factory
installed).
❒Curb mountable units.
KIT OPTIONS
Upcharge applies. Lead times may apply.
❒ Kit #1: Nine (9) sets of #1 type tray slides and
pilasters (field installed), bottom support of
one (1) 18"L x 26"D (458 mm x 661 mm) pan or
two (2) 14"L x 18"D (356 mm x 458 mm) pans.
❒ Kit #2: One (1) set half-section #2 steel rod tray
slides and pilasters (field installed), rim support
of one (1) 18"L x 26"D (458 mm x 661 mm)
pan.
❒ Kit #3: Six (6) sets of universal type tray slides
and pilasters (field installed), bottom support
of one (1) 18"L x 26"D (458 mm x 661 mm)
pan, two (2) 14"L x 18"D (356 mm x 458 mm)
pans or two (2) 12"L x 20"D (305 mm x
508 mm) pans.
❒ Additional kit option components available
individually.
ELEVATION PLAN VIEW
115/208-240/1
NEMA-14-20R
77"
(1956 mm)
851/4"
(2166 mm)
29"
(737 mm)
2623/32"
(679 mm)
6111/32"
(1559 mm)
61/16"
(154 mm)
TA Specification Series:
Reach-In Solid Half Door Heated Cabinet
783/16"
(1986 mm) 345/8"
(880 mm)
3521/32"
(906 mm)
11/32"
(27 mm)
13/16"
(31 mm)
1"
(26 mm)