True TA2HPT-2S-2S User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • FAX [phone] • [phone] • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TA2HPT-2S-2S
TA2HPT-2S-2S
Model Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions (inches)
(mm)
LD
†H*Watts Voltage Amps
Crated Weight
(lbs.)
(kg)
TA2HPT-2S-2S 4 56
1586
513/8
1305
371/4
947
781/4
1988
4000 115/208-240/60/1 16.8 600
273
† Depth does not include 11/8 " (29 mm) for system mechanical components.
* Height does not include 61/8 " (156 mm) for legs and 1 " (26 mm) for system mechanical components.
Requires 115/208 -240/60 Hz, single phase, 3 pole, 4 wire circuit.
4/06
Provides cabinet holding
temperature of 80°F to 180°F
(26.6°C to 82.2°C).
Cabinet equipped with 2 low
velocity fans to assure even
temperature distribution
throughout the cabinet. Fans are
controllable by exterior on/off
switch.
Two (2) stainless steel (for
corrosion resistance), finned tube
heating elements (1000 watts
each) per section for uniform
generation of electric heat.
Cabinet comes with a total of
4000 watts.
300 series stainless steel exterior
front, sides back and bottom. The
very finest stainless; higher tensile
strength for fewer dents and
scratches.
Anodized aluminum interior
cabinet liner. 300 series stainless
steel door liner and floor with
coved corners.
Six (6) adjustable, heavy duty
chrome shelves with wall mounted
pilasters.
Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.
Positive seal self-closing doors
with 120 degree stay open
feature. Lifetime guaranteed door
hinges and recessed door handles.
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
R
TA Specification Series:
Pass-Thru Solid Door Heated Cabinet
®USC

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor (U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model Front Side Plan 3D
PLAN VIEW
TA2HPT-2S-2S TFQY180E TFQY196S TFQY196P TFQY1963
TA2HPT-2S-2S
DESIGN
• True’s solid door pass-thru heated cabinets
are designed with enduring quality that
protects your long term investment.
HEATER SYSTEM
• Cabinet is designed to provide holding
temperatures of 80°F to 180°F (26.6°C to
82.2°C). Heating system controlled by
exterior on/off switch and temperature
control dial.
• Two (2) stainless steel (for corrosion
resistance), finned tube heating elements
(1000 watts each) per section for uniform
generation of electric heat. Cabinet comes
with a total of 4000 watts.
• Cabinet equipped with 2 low-velocity fans
to assure even temperature distribution
throughout the cabinet. Fans are
controllable by exterior on/off switch.
• Manually controlled vent located on top of
the cabinet for positive humidity control.
• Exterior dial thermometer; accurate direct
reading of internal cabinet temperature.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel doors,
front, sides, back and bottom.
• Interior- andonized aluminum liner. 300
series stainless floor with coved corners.
• Stainless steel breaker caps.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using high
density, CFC free, polyurethane insulation.
• Welded heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with 6" (153 mm)
stainless steel legs.
DOORS
• 300 series stainless steel exterior and
door liner. Doors open within cabinet
dimension. Door locks standard.
• Lifetime guaranteed recessed door handles.
Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to insure
permanent attachment.
• Positive seal self-closing doors with 120
degree stay open feature. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• Six (6) adjustable, heavy duty chrome
shelves 231/2"L x 2813/16"D (597 mm x
732 mm) with shelf clips and wall mounted
pilasters (factory installed). 11/16" (27mm)
standoff insures optimum airflow.
• Aluminum shelf support pilasters; shelves
are adjustable on 1/2" (13 mm) increments.
• Three (3) different interior kits available
(see Kit Options). Pilasters and tray slides
require field installation.
LIGHTING
• Incandescent interior lighting; safety
shielded. Lights activated by exterior on/
off switch.
MODEL FEATURES
• True heated cabinets are designed to hold
warm baked or cooked food. Cabinets
are not designed to heat ambient or cold
product.
• NSF-4 compliant for open food product.
ELECTRICAL
• True requires that a sole use circuit be
dedicated for the unit.
• Unit comes with 4 feed wires (including
ground) to be hardwired at installation site
to a 115/208-240/60 Hz. single phase - 20
amp dedicated outlet.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ Seismic/flanged legs.
❒Stainless steel rail skirt for use with legs
(field installed).
❒ Additional chrome shelves.
❒ Metal door handle.
❒ Stainless steel (electro polished) shelves.
❒Electronic temperature control (factory
installed).
❒Correctional facilities options - consult
factory.
❒Curb mountable units.
KIT OPTIONS
❒ Kit #1: Nine (9) sets of #1 type tray slides
and pilasters (field installed), bottom
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan or two (2) 14"L x 18"D
(356 mm x 458 mm) pans.
❒ Kit #2: One (1) set half-section #2 steel rod
tray slides and pilasters (field installed), rim
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan.
❒ Kit #3: Six (6) sets of universal type tray
slides and pilasters (field installed), bottom
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan, two (2) 12"L x 20"D (305 mm
x 508 mm) pans or two (2) 14"L x 18"D
(356 mm x 458 mm) pans.
❒ Additional kit option components available
individually.
TA Specification Series:
Pass-Thru Solid Door Heated Cabinet
ELEVATION PLAN VIEW
783/16"
(1986 mm)
77"
(1956 mm)
513/8"
(1305 mm)
389/32"
(973 mm)
2317/32"
(598 mm)
845/16"
(2142 mm)
61/16"
(154 mm)
13/16"
(31 mm)
FRONT OF CABINET
851/4"
(2166 mm)
1"
(26 mm)
371/4"
(947 mm)
11/32"
(27 mm)